User Guide for Passtech models including: AP300, W6YAP300, AP300 Access Point, Access Point, Point
PASSTECH CO., LTD AP300 ACCESS POINT W6YAP300 W6YAP300 ap300
File Info : application/pdf, 19 Pages, 912.34KB
DocumentDocumentUSER GUIDE ACCESS POINT (AP300_Ethernet Setting) Passtech Co., Ltd. Copyright 2017 Passtech Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of Passtech Inc. Any unauthorized use, copy, disclosure or distribution constitutes infringement of Passtech's intellectual property rights. AP300 (ACCESS POINT) User Manual Passtech Inc. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. Passtech provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products. Therefore, Passtech assumes no liability and is not responsible for customer applications or software design or performance relating to systems or applications incorporating Passtech products. In addition, Passtech assumes no liability and is not responsible for infringement of patents and/or any other intellectual or industrial property rights of third parties, which may result from assistance provided by Passtech. Composition of the information in this manual has been done to the best of our knowledge. Passtech does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. We have our development center in South Korea to provide technical support. For any technical assistance can contact our technical support team as below; E-mail: passtech@esmartlock.com Version: 1.0 2 http://www.esmartlock.com AP300 (ACCESS POINT) User Manual Table of Contents 1. Components Preparation ..........................................................4 1.1 SETUP Components...................................................................... 4 1.2 Setting Diagram ............................................................................. 4 2. AP Setting .....................................................................................5 2.1 SERVER & AP300 Communication Diagram ................................. 5 2.2 AP Setting ...................................................................................... 5 3. Server Setting.............................................................................11 3.1 Server pre-setting (DB Connection)..............................................11 3.2 Server Connection ....................................................................... 13 3.3 Server Startup and Shutdown ...................................................... 17 6. Specification ...........................................................................18 7 Regulatory Statement .............................................................19 Version: 1.0 3 http://www.esmartlock.com 1. Components Preparation 1.1 SETUP Components AP300 (ACCESS POINT) User Manual 1.2 Setting Diagram Version: 1.0 4 http://www.esmartlock.com 2. AP Setting 2.1 SERVER & AP300 Communication Diagram Internet AP300 (ACCESS POINT) User Manual 2.2 AP Setting Before creating AP account, please check PC IP and TCP/IP first by running `Command Prompt' and inputting `ipconfig' command as below. Open `AP300(2Bytes Floor)'. Version: 1.0 5 http://www.esmartlock.com AP300 (ACCESS POINT) User Manual Click `Search' button. Mac address and IP of connected AP200 will be shown on AP List. Version: 1.0 6 http://www.esmartlock.com AP300 (ACCESS POINT) User Manual Select an AP which you want to configure from the AP list, and input values in `Ethernet Setting' referring to the description below. Item Local IP Local Port Subnet Gateway Server IP Server Port Description AP IP Make sure this IP is only assigned to this AP Assign the port number on your own (Default: 5000) Input the value (Subnet Mask) checked in Command Prompt Input the value (Default Gateway) checked in Command Prompt Input the value (IPv4 Address) checked in Command Prompt Input the port number as set in Server program (Default 2274) Click `Setting' button to save the information to the selected AP, and check the message `Setting OK' from the message box below. Version: 1.0 7 http://www.esmartlock.com AP300 (ACCESS POINT) User Manual Select RF Channel and then click `Conn' button and check the message `Connected OK' from the message box. If it is connected well, `WRITE' and `READ' buttons will be activated. Click `READ' button to check current saved information. Version: 1.0 8 http://www.esmartlock.com AP300 (ACCESS POINT) User Manual Input values in `AP Setting' referring to the description below. Item AP Name RF Channel BUILD FLOOR ROOMS Description AP name that will be inputted into AP Account in Client program Assign AP ID on your own, but do not duplicate Only English alphabet and number are available (Any space or special characters cannot be contained) RF Channels you would like to connect (11~25) Building number (1~50) Floor number (1~99) Room numbers (1~999) Click `WRITE' button to save the information of the selected AP, and check the message `Configuration writing OK' from message box. Click `READ' button again to check if the setting values are properly saved. If you want to set another AP, follow the steps from . After setting is completed, click `EXIT' to close the window. Click `New' button from AP account window to enter new information. Input the following items and click `Save' button to save the entered information. Version: 1.0 9 http://www.esmartlock.com AP300 (ACCESS POINT) User Manual Item AP Name Server IP Update Flag AP IP Server IP Server Port Channel Building No. Group ID Lock Start Lock End AP Status AP Layout ID Description Input AP Name which you set in AP Settings Check to update the information into Server program automatically Input AP IP address which you set in AP Settings Input IP address of a PC which Server is installed in Input server port (Default: 2274) Input RF Channel which you set in AP Settings Select Building number which you set in AP Settings Input Group number which you set in AP Settings Input Starting Room number of the lock which you set in AP Settings Input Ending Room number of the lock which you set in AP Settings Waiting / Connect OK / Connect Error Select AP Layout ID same as you set in Custom Layout If you want to update the information, select the AP account from the list and click `Update' button to activate the input boxes. Input the updated information and click `Save' button to update. If you want to delete the information, select the AP account from the list and click `Delete' button to delete. Version: 1.0 10 http://www.esmartlock.com 3. Server Setting AP300 (ACCESS POINT) User Manual 3.1 Server pre-setting (DB Connection) Change the environmental files for DB connection before executing the communication Server Program. Run "ConfigSetting.exe" in the folder where the program is installed. Input the Connect information to connect DB. Ex) 192.168.0.52,1433 (1) (2) (1) SQL DB PC IP (2) MSSQL Connect Port (Default: 1433) Run the Server Program (PTHMS_Server.exe). Version: 1.0 11 http://www.esmartlock.com Click "Config" and put information as below; AP300 (ACCESS POINT) User Manual Put information same as the one you put for config setting above. (Local Server IP will be your PC IP) Ex) 192.168.0.52,1433 (1) (2) (1) SQL DB PC IP (2) MSSQL Connect Port (Default: 1433) Version: 1.0 12 http://www.esmartlock.com 3.2 Server Connection Run the Server Program (PTHMS_Server.exe). AP300 (ACCESS POINT) User Manual The program is started as shown below. Version: 1.0 13 http://www.esmartlock.com AP300 (ACCESS POINT) User Manual If the SQL DB is not accessible, the above program will not be executed. The DB Connection Configuration screen will appear, and you have to enter the DB connection value as shown below. (Refer to contents 4-1) The Server Account is the part which sets the communication port to receive or send data form the AP. Click "Add IP/Port", and once you see a Dialog screen, input server name, IP address where the server is installed, and the port number. Then, click "OK" to create a server account. Version: 1.0 14 http://www.esmartlock.com AP300 (ACCESS POINT) User Manual Once the server account is created successfully, you will see a screen below. This is the part where you can register the AP information that connects to Server, which you have set from AP Management Program. (AP Client has to be set up before this. please refer to 3-2) Click "Add Channel" Version: 1.0 15 http://www.esmartlock.com Put all the information same as AP Client. AP300 (ACCESS POINT) User Manual AP Name (must be same as AP Client) Channel number (must be same as AP Client) AP IP Address (same IP as Local IP in AP Client) Lock Info. (Building#, Floor#, Start/End Room# -> must be same as AP Client) Server IP (Your PC IP) Server Port (Default: 2274) Once it is connected, you will see it on Channel box. Version: 1.0 16 http://www.esmartlock.com AP300 (ACCESS POINT) User Manual 3.3 Server Startup and Shutdown 1) Server Program Startup Run Server Program (PTHMS_Server.exe). When the program is running, a Tray-Icon is created as below. 2) Program Shutdown To exit the program, right-click the Server Icon on the Tray-Icon and click "Exit"., or can be forced to terminate in the Task Manager. Version: 1.0 17 http://www.esmartlock.com 6. Specification Item Material Communication Security Power Supply Indicator Dimension Operation TEMP Certification AP300 (ACCESS POINT) User Manual Detail ABS 2.4Ghz Zigbee(ONLINE LOCK COMM) TCP/IP(SERVER COMM) AES128 DC 12V ADAPTOR & POE(IEEE802.3af) LED 101.60mm * 101.60mm * 27.50mm 0 ~ 50 CE, FCC *****This furniture lock system is using in Hotel, Office and any place which is without residential area. Version: 1.0 18 http://www.esmartlock.com 7 Regulatory Statement AP300 (ACCESS POINT) User Manual FCC Part 15.105 statement (Class A) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Part 15.21 statement Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device must not be co-located or operating in conjunction with any other antenna or transmitter. RF Exposure Statement (MPE) The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all persons at all times. Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information Responsible Party Cardcom Address: 1301 S. Beach Blvd. Ste-P La Habra, CA 90631 Tel.: 562-943-6300 E-mail: esmartlock@cardcom.com Version: 1.0 19 http://www.esmartlock.comMicrosoft Word 2016