1. Overview

* Camera not included.

Diagram showing the Feiyu SCORP-C 2 gimbal with numbered components:

• [1] Power button
• [2] FPV button
• [3] F2 button
• [4] Screen
• [5] Shutter button
• [6] Mode button
• [7] Joystick
• [8] R button
• [9] Auto rotation button
• [10] L button
• [11] F1 button
• [12] 1/4 inch thread hole
• [13] Knob function switching button
• [14] Multifunction knob
• [15] Roll lock
• [16] Indicator
• [17] Roll axis
• [18] Cross arm
• [19] Focus motor port 2
• [20] Extension port
• [21] Fixed plate
• [22] Quick release plate
• [23] Upper quick release plate
• [24] Tilt lock
• [25] Tilt axis
• [26] AI tracking camera
• [27] AI tracking indicator
• [28] Camera control port/USB-C power output port*
• [29] Focus motor port 1
• [30] Versatile arm
• [31] Pan axis
• [32] Pan lock
• [33] A/B button
• [34] Trigger button

* Supports charging for shooting devices compatible with the USB power supply protocol.

2. Getting started

User Manual & App Download

Scan the QR code to get the latest user manual or download it from the official website: https://www.feiyu-tech.com/feiyu-scorp-c-2/.

Download the Feiyu SCORP app by scanning the QR code or searching in the App Store or Google Play. App requirements: iOS ≥ V13.0, Android ≥ V10.0.

2.1 Charging

Please fully charge the battery before powering on the gimbal for the first time. Charging is supported via USB-C cable and includes quick charge functionality.

2.2 Adjust the gimbal to gimbal balancing position

Diagram illustrating the transition from a folded gimbal position to a balanced position.

3. Mounting the shooting equipment

Before mounting, ensure the shooting equipment and accessories are within the load requirements. For camera setup steps, refer to the relevant compatibility list on the official website: https://www.feiyu-tech.com/feiyu-scorp-c-2/down.html.

Before mounting, ensure the camera is ready for shooting (camera lens installed, lens cover removed, memory card and battery inserted and fully charged). Complete steps from chapter "2. Getting started" and ensure the gimbal is adjusted to the gimbal balancing position. The gimbal must be powered off or in sleep mode before mounting the camera.

3.1 Attach the upper quick release plate

Attach the upper quick release plate to the camera by tightening the screw. If the camera does not have a 1/4-20 inch screw hole, use a mount adapter with a 1/4-20 inch screw hole and follow the steps above.

3.2 Mounting fixed plate

Steps:

1. Unlock the fixed plate lock.
2. Slide the fixed plate into the slot.
3. Lock the fixed plate lock.

3.3 Mounting quick release plate

Steps:

1. Unlock the quick release plate lock.
2. Slide the quick release plate into the slot.
3. Lock the quick release plate lock.

Use the balancing knob to fine-tune the position of the quick release plate.

3.4 Mount camera on gimbal

Steps:

1. Unlock the upper quick release plate lock.
2. Slide the camera (mounted on the upper quick release plate) into the slot.
3. Lock the upper quick release plate lock.

3.5 Install lens holder (Optional)

Install the lens holder on the quick release plate if needed. The rubber of the lens holder must be directly under the lens. It is recommended to use the lens holder when using a long or heavy lens.

4. Gimbal balancing

Please balance the gimbal before shooting. Take camera mounting as an example. Ensure the camera and lens are ready for shooting, and the gimbal is powered off or in sleep mode before balancing. It is recommended to hold up the camera first, then move the slide arm, cross arm, and vertical arm.

4.1 Balancing the tilt axis

4.1.1 Balancing the vertical tilt

Unlock motor lock A; lock motor locks B and C. Point the camera lens upward and observe its tilt direction.

Steps:

1. Unlock the fixed plate lock.
2. Move the camera in the opposite direction of its tilt until the lens remains perfectly vertically upward.
3. Lock the fixed plate lock, supporting the camera upward from below to ensure proper fixation.

4.1.2 Adjust depth for the tilt axis

Keep motor lock A unlocked; motor locks B and C locked. Place the camera lens pointing horizontally forward and observe its tilt direction.

Steps:

1. Unlock the quick release plate lock.
2. Move the camera opposite its tilt and use the balancing knob to fine-tune until the lens remains horizontally forward.
3. Lock the quick release plate lock, supporting the camera upward from below to ensure proper fixation.

The tilt axis is balanced when the camera remains stationary at a tilt angle of about ±45°.

4.2 Balancing the roll axis

Unlock motor lock B; lock motor locks A and C. Observe the camera's swing direction.

Steps:

1. Unlock the cross arm lock.
2. Move the camera opposite its swing until the cross arm remains level.
3. Lock the cross arm lock.

The roll axis is balanced when the camera remains stationary at a horizontal angle.

4.3 Balancing the pan axis

Unlock motor lock C; lock motor locks A and B. Hold the handle and tilt the gimbal about 45°, rotate the pan axis until parallel with the ground, then observe the camera's swing direction.

Steps:

1. Unlock the vertical arm lock.
2. Move the vertical arm opposite its swing until the vertical arm remains level.
3. Lock the vertical arm lock.

The pan axis is balanced when the camera remains stationary at a horizontal angle.

5. Operation

5.1 Power ON/OFF

Before powering on the gimbal, ensure it is balanced and all three axes are unlocked. If axes are locked, the gimbal will enter sleep mode for protection. Single tap the power button to wake the gimbal after unlocking all 3 axes. Long press the power button and release it when you hear the beep sound to power on/off.

Important: Please set motor power first after powering on the gimbal for the first time or after changing a new camera/lens.

5.2 Follow mode introduction

5.3 Button operation

Power button

Long press: Power on/Power off

Single tap: (1) Wake up (In sleep mode) (2) Display battery levels of the gimbal (When powered off)

Double tap: Enter sleep mode

M button

Single tap: PF mode (Default) /PTF/FPV (Switch in turn)

Double tap: Recenter

Long press for 3 seconds: Enter the auto tune

Tap five times: Horizon calibration

Joystick

Push: (1) Control the movement of the tilt and pan axes. (2) Control album ✩ (3) Framing Adjustment (While AI Tracking)

Shutter button

Camera Connected

Press half way: Focus

Single tap (Fully): Start/stop recording

Long press (Fully): Take photo

Auto rotation button

Single tap: Enter auto rotation mode

Single tap again: (1) Exit auto rotation mode (When gimbal is not rotating) (2) Pause the rotation (When gimbal is rotating)

L button

Single tap: Turn left continuously

Single tap again: Switch rotating speed (Switch cyclically among Slow/Med/Fast orderly, the preset speed is Med). Active in auto rotation mode.

R button

Single tap: Turn right continuously

Single tap again: Switch rotating speed (Switch cyclically among Slow/Med/Fast orderly, the preset speed is Med). Active in auto rotation mode.

F1 button

Single tap: Enter/exit album ✩

Double tap: Enter/exit portrait mode

Triple Tap: AI power on/off

Long Press: Enter/Exit AI tracking (With AI Power enabled)

F2 button

Double tap: Enter FFW mode

Trigger button

Double tap: Recenter (in non-selfie mode) / Selfie recenter (in selfie mode)

Triple tap: Enter/Exit selfie mode (Pan axis turn 180°)

Press and hold: Lock mode (Release to exit). You can customize the function via App.

FPV button

Single tap: Enter FPV mode

A/B Button

Long press: Mark the current position as A/B

Single tap: Return to the position A/B that you have marked. Can be used to mark axes/focus position.

Multifunction knob

Turn: (1) Control the movement of the roll, tilt, and pan axes. (2) Control electronic focus/zoom (3) Control focus motor. Set current control option as (1), (2), or (3) through long press the knob function switching button.

Knob function switching button

Single tap: Switch the control object while controlling the movement of the 3 axes (Tilt/Pan/Roll)

Long press: Switch the control options of Multifunction knob in turn (The movement of the 3 axes, electronic focus/zoom)

Key Combinations:

A: Joystick down + triple tap the F2 button: Clears all Bluetooth pairing information for the smartphone. After reboot, you can re-pair devices.

B: Joystick up + triple tap F2 button: Clears all Bluetooth pairing information for the mirrorless camera. After reboot, you can re-pair the camera.

C: Knob function switching button + FPV button: Press together to force the main body to power off within 1 second.

Note:

(1) When using a camera or the original camera app on your smartphone to capture photos or videos, some features may require specific camera or smartphone support. You can visit the official website to check the list of compatible devices: https://www.feiyu-tech.com/feiyu-scorp-c-2/.

(2) We recommend using this product in conjunction with the Feiyu SCORP App. Operations marked with a ✩ are designed for use with smartphones paired with the Feiyu SCORP App.

5.4 AI Tracking

Under AI Power-On State, the following controls are available:

AI Gesture Control

OK gesture (Left or right hand): Start tracking/Stop tracking. Start tracking with the green light stays on. Repeat this gesture, stop tracking, enter standby mode with the red light stays on. Two gestures must be separated by 3 seconds.

Thumbs opposite direction: Stop tracking, enter standby mode with the red light stays on.

Spread palm (Left or right hand): Shutter. In photo/video mode: Take photo or start recording after a 3-second countdown with beep sound. After started the recording, do the gesture again to stop recording.

Double L-Shaped gestures: Custom framing. Start framing, green light blinks fast. When the subject moves to the desired position, perform this gesture again to complete framing, and the green light stays on.

Two thumbs up gesture: Disable gesture control. In tracking mode, this gesture can disable the gesture control function. Once disabled, AI tracking can still be controlled via the buttons.

Button control

Long press F1 button: Start tracking/Stop tracking

Triple tap F1 button: AI power on/off

Double tap Trigger button: Stop tracking

5.5 Indicator

[1] Follow status indicator: TILT = Tilt axis, ROLL = Roll axis, PAN = Pan axis. The indicator is on which means the corresponding axis follows the movement of user's hand.

[2] Camera/Bluetooth indicator

[3] Battery indicator: Green light: Power on / Charging complete. Red light: Charging. Red light flashing rapidly: Low power, will auto power off. Light off: Power off.

6. Specifications

Product name: Feiyu SCORP-C 2 Handheld Gimbal for Camera

Product model: FeiyuSC2

Max. Tilt Range: +120° ~-200° (±3°)

Max. Roll Range: +75° ~-245° (±3°)

Max. Pan Range: 360°

Weight (main body): About 1320g (Not including tripod)

Payload Capability: About 3500g (Well-balanced)

Battery life: ≤ 14 Hours (Motion State)

Battery: 4500mAh

Operating Voltage: 6.8V-8.4V

Compatible: Sony, Canon, Nikon, Panasonic, Fujifilm, etc. (For specific camera and lens compatibility, please refer to the official website's compatibility list).

Bluetooth name: FY_SCORP_C2_XX

Included in the Box

• [1] Main body x1
• [2] Tripod x1
• [3] Fixed plate x1
• [4] Upper quick release plate x1
• [5] Camera fixed screw x1
• [6] Lens holder x1
• [7] Lens holder screw x1
• [8] Type-C Cable x1
• [9] Type-C to Type-C Cable x1
• [10] Quick release plate x1
• [11] Hex key x1
• [12] Manual x1

Notices and Warnings

Notice:

1. Ensure the motors are not obstructed by external forces during power-on and operation.
2. DO NOT expose the gimbal to water or other liquids.
3. DO NOT disassemble the gimbal. If it is accidentally disassembled and malfunctions, send it to after-sales for repair. All related costs are the user's responsibility.
4. Continuous operation may cause the motor housing to become hot. Operate with care.
5. DO NOT drop or strike the gimbal. Impact may damage it or cause malfunction. If abnormal operation occurs after a drop or impact, contact after-sales support immediately.

Storage and Maintenance:

1. Keep the gimbal out of reach of children and pets.
2. DO NOT leave the gimbal near heat sources (e.g., furnaces or heaters) or inside a vehicle on hot days.
3. Store the gimbal in a dry environment.
4. DO NOT overcharge or overdischarge the battery, as this can damage the cells. If unused for extended periods, charge it at least once a month.
5. DO NOT use the gimbal in environments that are excessively hot or cold.

Warning: Please read the user manual carefully before use. Improper use of this product may cause damage and pose a risk to your safety.

Regulatory Information

IC Warning

This device contains license-exempt transmitter(s)/re-ceiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

The device complies with Industry Canada's license-exempt CNR. Operation is authorized under two conditions: (1) the device must not cause interference, and (2) the user must accept any radio interference received, even if it may compromise the device's operation.

IC Radiation Exposure Statement

This equipment complies with IC radiation exposure limits defined for an uncontrolled environment.

FCC Regulatory Conformance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.

NOTE

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

RF Exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Feiyu Gimbal Privacy Policy

Guilin Feiyu Technology Incorporated Company (hereinafter referred to as "Feiyu", "we", or "us") understands the importance of your privacy and is committed to protecting it. This Privacy Policy (the "Policy") applies to the gimbals we provide.

If under the laws of your jurisdiction you are considered a minor or do not have full legal capacity (hereinafter “Minor”), please carefully read and fully understand this Policy together with your legal guardian. You may use Feiyu products and services only after obtaining your guardian's consent.

Please read this Policy carefully to ensure you understand how we handle your personal information. We will process your personal information in compliance with applicable laws and regulations, based on lawful and legitimate purposes and in accordance with the principle of good faith. If you have any questions about this Policy, you can contact us using the information provided on our website.

I. How we collect and use your personal information

Personal information is information recorded electronically or otherwise that relates to an identified or identifiable natural person, and does not include information that has been fully anonymized. Please note that definitions of "personal information" (also referred to as "personal data") may vary in different countries or regions; for specifics, please refer to the personal information protection laws and regulations applicable in your location.

We adhere to the principles of lawfulness, fairness, and necessity when collecting and using your personal information for the purposes described below. We collect the personal information you voluntarily provide during your use of our products and services, or that is generated as a result of such use. If we need to use your personal information for any purposes not stated in this Policy, or to use information collected for one purpose for another purpose, we will notify you in a reasonable manner and obtain your consent again before such use.

(A) Collection of Personal Information

When you use our products/services, we will collect and use the following personal information:

1. To provide you with the "Gesture Control" service, when you enable the "Gesture Control" feature and make a gesture, the gimbal captures images of your head and hands. On-device AI analyzes your hand structure in real time to recognize the gesture command and activate the specified function. This processing is one-time only and is necessary to provide the service. Rest assured, we do not store any images of your head or data about your hand structure. You can turn off the AI camera at any time under More Settings > AI Power.
2. To provide you with the "AI Tracking" service, when you enable the "AI Tracking" feature during use, the gimbal captures images of your head and body. On-device AI analyzes your head and body structure in real time to track movement. This processing occurs only during each recognition session and is necessary to provide the service. We do not store or retain any of your head or body structure data.
3. In addition to the information described above, in order to provide you with customer support services, we may collect the content you submit to our support team.
4. The content of this Policy will be updated periodically. Specific updates will be detailed in the manual on our official website at https://www.feiyu-tech.com.

Please be informed and rest assured that we deeply respect and prioritize the protection of your personal privacy. We will not store any video or audio content or recordings generated during your communications using our device.