EuControls - Intelligent and Wireless Lighting Controllers
Instruction Manual for EuControls models including: S830-PL-DBT, S830PLDBT, 2AJ2N-S830-PL-DBT, 2AJ2NS830PLDBT, S830 PL DBT Bluetooth Mesh PIR Photo and Lighting Control, Bluetooth Mesh PIR Photo and Lighting Control, PIR Photo and Lighting Control, Lighting Control
EuControls Corporation S830-PL-DBT Dimmer 2AJ2N-S830-PL-DBT 2AJ2NS830PLDBT s830 pl dbt
File Info : application/pdf, 4 Pages, 882.03KB
DocumentDocumentBluetooth Wireless S830-PL-DBT PIR + Light + Photo + Temp Bluetooth mesh PIR, Photo & Lighting Control ON/OFF & 0-10V Dimming Product Features Bluetooth mesh Wireless Control of Luminaries Bluetooth mesh Occupancy Sensor, & Photo Sensor 2.4GHz, +10dBm Bluetooth transmit power 0-10V Analog Dimming Control, 50mA Sink Compatible with Electronic Ballasts & LED Drivers that comply with IEC60929 Annex E2, 0-10V Dimming. Best when used with Dim to Zero (Dim to OFF) Ballasts & LED Drivers Safety and Compliance 1. UL 916 Listed 2. FCC ID: 2AJ2N-S830-PL-DZB, FCC Class B. 3. Bluetooth mesh compatible 4. Mount 1/2 Inch Trade Size Knockout, Dust Proof Design IP50 Environmental 1. Operating temperature: 0 to +60°C 2. Storage temperature range: -10C to +70°C 3. Humidity (non-condensing): 5% - 95%RH 4. Cooling: Convection 5. Vibration Frequency: 5-55Hz/2g, 30 minutes 6. Impact resistance: 1g/s Electrical Specifications at 25OC Input: UL Class 2 DC voltage 12VDC (10 to 14VDC) Input Current Draw: 60mA, 200mA Peak during transmit. 0-10V Dimming intended for use with Dim to Zero/Dim to OFF Ballasts and LED Drivers. Part Numbers E513483 Part Number Dimming US & CN Class 2 S830-PL-DBT YES S830-DBT YES Control Bluetooth Bluetooth ON/ OFF Control YES via Dim YES via Dim IP50 Dimming 0-10V Analog YES YES Photo Sensor YES NO PIR Occupancy Sensor YES NO S830-DBT Typical Application Circuit 12VDC UL Class 2 Power Source AUX +12VDC AUX Common AC Line (BLACK) AC Neutral (WHITE) Dimming LED Driver or Dimming Ballast (0-10V) VIOLET (0-10V) Analog Dim+ Control GRAY or PINK (0-10V) Analog Dim Control S830-ACC-CNR1M Accessory 1M Cable S830 +12VDC S830 12VDC GND S830 DIMS830 DIM+ S830 S830-PL-DBT FCC ID 2AJ2N-S830-PL-DBT: Channel 0 to 39 See warnings on page 4. EuControl Contact: Info@EuControls.com l Los Angeles, CA 90248 l 888 535 9580 Specifications subject to change without notice © EuControls, Inc. Los Angeles, California T: 888 535-9580 E: Sales@EuControls.com www.EuControls.com Rev B - 10/10/2022 U.S. Patent Pending 1 Bluetooth Wireless S830-PL-DBT PIR + Light + Photo + Temp Bluetooth mesh PIR, Photo & Lighting Control ON/OFF & 0-10V Dimming FCC ID 2AJ2N-S830-PL-DBT: Channel 0 to 39 See warnings on page 4. Mechanical Dimensions: Inches [mm] Material: 5VA PC Plastic Case Weight: TBD Grams (TBD oz.) Typical Notes: RED Occupancy LED Visible through PIR Lens. BLUE Bluetooth LED Visible through PIR Lens. S830-DBT BLUE Bluetooth LED Visible through Flat Cover Reset switch is located on flat side of case near connector. Labeling Example S830-ACC-CNR1M, 1 Meter Cable, mm (Scale ~5:1) S830-DBT EuControl Contact: Info@EuControls.com l Los Angeles, CA 90248 l 888 535 9580 Specifications subject to change without notice © EuControls, Inc. Los Angeles, California T: 888 535-9580 E: Sales@EuControls.com www.EuControls.com Rev B - 10/10/2022 U.S. Patent Pending 2 Bluetooth Wireless S830-PL-DBT PIR + Light + Photo + Temp Bluetooth mesh PIR, Photo & Lighting Control ON/OFF & 0-10V Dimming Input Specifications Parameter Input Voltage Input Current Bluetooth Control Transmit Power Bluetooth Control Receive Photo Sensor Range Min. 10 ---- ---- ---- 1 Typ. 12 60mA ---- -95dBm ---- Max. 14 200mA Peak +10dBm ---- 300fc Notes/Conditions V DC, UL Class 2 Power Source mA DC, Peak occurs during transmit ON/OFF, 0-10V dimming & Photo Sensor, Standard Bluetooth Bluetooth Radio Receive Sensitivity Precision Optical Filtering Matches the Human Eye Output Specifications Parameter Sink Current on 0-10V (+) Purple Wire Absolute Voltage Range on 0-10V (+) Purple Wire Dimming Range Min. 0mA -20.0V 0.2V Typ. ---- ---- ---- Max. 50mA +20V +10V Notes/Conditions IEC60929 Annex E2 IEC60929 Annex E2 Ballast or Led Driver provides Dim Voltage & Current per IEC60929 Annex E2, 0(1)-10V Analog Dimming Environmental Specifications Parameter Operating Temperature (Ta) Storage Temperature (Ts) Operating Humidity Vibration Min. 0 OC -10 OC ---- 5 Hz Typ. ---- ---- ---- ---- Max. +60 OC +70 OC 95% RH 55 Hz Notes/Conditions Operating temperature range. Non operating temperature range. Relative Humidity, non-condensing. 2G, 10 minutes/1 cycle, period 30 minutes, each along X, Y, Z axis. Safety & EMC Compliance Safety Notes/Standards UL/CUL Listed CE 0-10V Class 2 Dimming Circuit FCC UL916, CSA22.2 NO. 205 EN61347-1, EN61347-2-13 UL & cUL Class 2, Dim+ Violet/Dim Pink. (Using a 12VDC UL Class 2 Power Source) FCC ID 2AJ2N-S830-PL-DBT CH0 to CH39, Also Certified to FCC Class B, See Warnings on page 4. EuControl Contact: Info@EuControls.com l Los Angeles, CA 90248 l 888 535 9580 Specifications subject to change without notice © EuControls, Inc. Los Angeles, California T: 888 535-9580 E: Sales@EuControls.com www.EuControls.com Rev B - 10/10/2022 U.S. Patent Pending 3 Bluetooth Wireless S830-PL-DBT PIR + Light + Photo + Temp Bluetooth mesh PIR, Photo & Lighting Control ON/OFF & 0-10V Dimming Standard Lens Coverage FCC ID 2AJ2N-S830-PL-DBT: Channel 0 to 39 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. EuControl Contact: Info@EuControls.com l Los Angeles, CA 90248 l 888 535 9580 Specifications subject to change without notice © EuControls, Inc. Los Angeles, California T: 888 535-9580 E: Sales@EuControls.com www.EuControls.com Rev B - 10/10/2022 U.S. Patent Pending 4