User Manual for Smart-AVI models including: SM-UHO Series, SM-UHO-8P, SM-UHO-16P, Single-Head HDMI KVM Switch
What’s in the box? PART NO. SM-UHO Unit PS12VDC3A. Q-TY DESCRIPTION. 1 8/16-Port HDMI KVM Switch with USB 2.0 Support and OSD 1 Power Adapter 1 User Manual.. View
SM-UHO-8P - SmartAVI 8-PORT HDMI KVM Switch
File Info : application/pdf, 11 Pages, 1.12MB
DocumentDocumentSM-UHO SERIES Single-Head HDMI KVM Switch with USB 2.0 Support and OSD USER MANUAL SM-UHO-8P SM-UHO-16P Single-Head 8-Port HDMI KVM Switch with USB 2.0 Support and OSD Single-Head 16-Port HDMI KVM Switch with USB 2.0 Support and OSD Designed and Manufactured in the USA 1-800-284-2131 www.smartavi.com OVERVIEW TECHNICAL SPECIFICATIONS_________________________________________________________________ 3 WHAT'S IN THE BOX?_________________________________________________________________________4 FRONT AND BACK___________________________________________________________________________ 4 INSTALLATION_______________________________________________________________________________ 5-6 SYSTEM OPERATION_________________________________________________________________________ 7 FRONT PANEL CONTROL_____________________________________________________________________ 7 HOTKEY AND RS232 SERIAL CONTROL_______________________________________________________ 7 CUSTOM HOTKEY TRIGGERS_________________________________________________________________ 8 OSD MENU___________________________________________________________________________________8 TROUBLESHOOTING_________________________________________________________________________ 9 TECHNICAL SUPPORT________________________________________________________________________ 9 LIMITED WARRANTY STATEMENT____________________________________________________________ 10 HDMI KVM Switch with USB 2.0 Support and OSD 2 Technical Specifications VIDEO Format Maximum Pixel Clock Input Interface Output Interface Resolution DDC Input Equalization Input Cable Length Output Cable Length USB Signal Type Input Interface Output Interface CONTROL Front Panel RS-232 Hot Keys OSD OTHER Power Adapter Approvals Operating Temperature Storage Temperature Humidity Emulation HDMI2.1 165 MHz SM-UHO-8P SM-UHO-16P (1) HDMI Up to 4K (3840 x 2160 @ 30 Hz) 5 volts p-p (TTL) Automatic Up to 20 ft Up to 20 ft (8) HDMI (16) HDMI USB 2.0, 1.1, and 1.0 w/ internal hub SM-UHO-8P (8) USB Type B SM-UHO-16P (16) USB Type B (2) USB 1.1 Type A for KVM Devices; (2) USB 2.0 Type A Transparent Push Buttons with LED Indicators DB9 Female - 115200 N,8,1, No flow control Via Keyboard Via KM arrow keys External 100-240 VAC/12VDC3A @ 24W UL, CE, ROHS Compliant +32 to +104°F (0 to +40°C) -4 to 140°F (-20 to +60°C) Up to 80% (No Condensation) Keyboard and Mouse HDMI KVM Switch with USB 2.0 Support and OSD 3 What's in the box? PART NO. SM-UHO Unit PS12VDC3A Q-TY DESCRIPTION 1 8/16-Port HDMI KVM Switch with USB 2.0 Support and OSD 1 Power Adapter 1 User Manual FRONT AND BACK SM-UHO-8P Back SM-UHO-8P Front SM-UHO-16P Back SM-UHO-16P Front HDMI KVM Switch with USB 2.0 Support and OSD 4 INSTALLATION 1. Ensure that power is turned off or disconnected from the unit and the computers. 2. Use a HDMI cable to connect the HDMI output port from each computer to the corresponding HDMI IN ports of the unit. 3. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective USB ports of the unit. 4. Optionally connect a stereo audio cable (3.5mm to 3.5mm) to connect the audio output of the computers to the AUDIO IN ports of the unit. 5. Connect a monitor to the HDMI OUT console port of the unit using a HDMI cable. 6. Connect a USB keyboard and mouse in the two USB console ports. 7. Optionally connect stereo speakers to the AUDIO OUT port of the unit. 8. Finally, power on the KVM by connecting a 12VDC power supply to the power connector, and then turn on all the computers. Note: You can connect up to 8 computers to the 8 port KVM and up to 16 computers to the 16 port KVM. HDMI IN HDMI OUT USB IN USB K/M OUT USB 2.0 OUT HDMI KVM Switch with USB 2.0 Support and OSD 5 Installation (continued) EDID LEARN The KVM is designed to learn the connected monitor's EDID upon power up. In the event of connecting a new monitor to the KVM, a power recycle is recommended. The KVM will indicate to the user the EDID learn process by flashing the front panel's LEDs. When the LEDs stop flashing, the EDID learn process is done. The monitor must be connected to the video output connector located in the console space at the back of the KVM during the EDID learn process. If the read EDID from the connected monitor is identical to the current stored EDID in the KVM then the EDID learn function will be skipped. HDMI KVM Switch with USB 2.0 Support and OSD 6 System operation There are three ways to control the SM-UHO: Keyboard Hotkeys, RS-232 Serial Commands, and Front Panel Buttons. All modes of control will allow the user the set their desired configurations. front panel control To switch to an input port, simply push the button on the front-panel of the KVM. If an input port is selected, the LED of that port will turn on. Hold down the button of Front Panel for 3 seconds to force learn EDID. hotkey and rs232 serial control The SM-UHO may also be controlled via RS-232 commands. To use these commands, you must use HyperTerminal or an alternate terminal application. The settings for the connection are as follows: Baudrate 115200; Data Bits 8; Parity None; Stop Bits 1; Flow Control None. Once you have connected to the SM-UHO via Serial, you will see the SM-UHO information when the device starts up. The following commands can be used for RS-232 with available keyboard hotkeys: COMMAND DESCRIPTION Switch All USB, Video, and Audio Switch Audio Only Switch KVM Only Switch USB Only Learn EDID Trigger Hotplug Reset Software Factory Defaults Get Port Status HOTKEY [CTRL][CTRL] [port #] [ENTER] [CTRL][CTRL] a [port #] [ENTER] [CTRL][CTRL] c [port #] [ENTER] [CTRL][CTRL] u [port #] [ENTER] [CTRL][CTRL] e [ENTER] [CTRL][CTRL] h [ENTER] [CTRL][CTRL] r [ENTER] [CTRL][CTRL] f [ENTER] N/A RS-232 COMMAND //m [port #] [ENTER] //a [port #] [ENTER] //c [port #] [ENTER] //u [port #] [ENTER] //e [ENTER] //h [ENTER] //r [ENTER] //f [ENTER] //?? [ENTER] HDMI KVM Switch with USB 2.0 Support and OSD 7 Custom hotkey triggers Users are able to customize the keys that trigger Hotkeys. The default trigger for hot key function on the keyboard is Ctrl + Ctrl. The trigger function can be used to change to the following keys: Ctrl (Left / Right), Alt, Shift (Left / Right), Caps Lock, Scroll Lock, F1-F12 TO VIEW HOTKEY TRIGGER SETTING Use the RS-232 command: / + / + ? + ? + Enter to view the current HotKey Trigger To reset the Hotkey Trigger use the "Factory Defaults" command. TO CHANGE THE HOTKEY TRIGGER SETTING HotKey + HotKey + x + [desired hotkey] RESET HOTKEY TRIGGER Run "Factory Defaults" command. Example: If users current Hotkey trigger is Shift and want to change to Scroll Lock, user would type Shift + Shift + x + Scroll Lock OSD MENU The OSD Menu is used to update the display configurations. The OSD Menu overlaps the screen and is controlled through any standard keyboard connected to one of the K/M slots on the device: Important Notice: After entering the OSD Menu, all keyboard and mouse functionality will be blocked from the computer and only used for the OSD commands. After exiting the OSD menu using Ctrl + Ctrl + o Command, all keyboard and mouse functionality will be restored. Hold down the first and last buttons of Front Panel for 3 seconds to force learn EDID. COMMAND DESCRIPTION Enable/Disable OSD menu Moves pointer UP on OSD Menu Moves pointer DOWN on OSD Menu Moves pointer LEFT on OSD Menu Moves pointer RIGHT on OSD Menu Enter Selected Input ESC from Information and EDID sub menus Show/Hide Channel Location Name EDID HOTKEY [CTRL][CTRL] o [ENTER] (UP arrow) (DOWN arrow) (LEFT arrow) (RIGHT arrow) [ENTER] [ESC] F6 F7 F8 F9 HDMI KVM Switch with USB 2.0 Support and OSD 8 Troubleshooting No Power · Make sure that the power adapter is securely connected to the power connector of the unit. · Check the output voltage of the power supply and make sure that the voltage value is around 12VDC. · Replace the power supply. No Video · Check if all the video cables are connected properly. · Connect the computer directly to the monitor to verify that your monitor and computer are functioning properly. · Restart the computers. Keyboard is not working · Check if the keyboard is properly connected to the unit. · Check if the USB cables connecting the unit and the computers are properly connected. · Try connecting the USB on the computer to a different port. · Make sure that the keyboard works when directly connected to the computer. · Replace the keyboard. Mouse is not working · Check if the mouse is properly connected to the unit. · Try connecting the USB on the computer to a different port. · Make sure that the mouse works when directly connected to the computer. · Replace the mouse. No Audio · Check if all the audio cables are connected properly. · Connect the speakers directly to the computer to verify that the speakers and the computer audio are functioning properly. · Check the audio settings of the computer and verify that the audio output is through the speakers. Technical support For product inquiries, warranty questions, or technical questions, please contact info@smartavi.com. HDMI KVM Switch with USB 2.0 Support and OSD 9 Limited warranty statement A. Extent of limited warranty SmartAVI, Inc. warrants to the end-user customers that the SmartAVI product specified above will be free from defects in materials and workmanship for the duration of 1 year, which duration begins on the date of purchase by the customer. Customer is responsible for maintaining proof of date of purchase. SmartAVI limited warranty covers only those defects which arise as a result of normal use of the product, and do not apply to any: a. Improper or inadequate maintenance or modifications b. Operations outside product specifications c. Mechanical abuse and exposure to severe conditions If SmartAVI receives, during applicable warranty period, a notice of defect, SmartAVI will at its discretion replace or repair defective product. If SmartAVI is unable to replace or repair defective product covered by the SmartAVI warranty within reasonable period of time, SmartAVI shall refund the cost of the product. SmartAVI shall have no obligation to repair, replace or refund unit until customer returns defective product to SmartAVI. Any replacement product could be new or like new, provided that it has functionality at least equal to that of the product being replaced. SmartAVI limited warranty is valid in any country where the covered product is distributed by SmartAVI. B. Limitations of warranty To the extant allowed by local law, neither SmartAVI nor its third party suppliers make any other warranty or condition of any kind whether expressed or implied with respect to the SmartAVI product, and specifically disclaim implied warranties or conditions of merchantability, satisfactory quality, and fitness for a particular purpose. C. Limitations of liability To the extent allowed by local law the remedies provided in this warranty statement are the customers sole and exclusive remedies. To the extant allowed by local law, except for the obligations specifically set forth in this warranty statement, in no event will SmartAVI or its third party suppliers be liable for direct, indirect, special, incidental, or consequential damages whether based on contract, tort or any other legal theory and whether advised of the possibility of such damages. D. Local law To the extent that this warranty statement is inconsistent with local law, this warranty statement shall be considered modified to be consistent with such law. HDMI KVM Switch with USB 2.0 Support and OSD 10 NOTICE The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose. SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material. No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from SmartAVI, Inc. 20180109 Designed and Manufactured in the USA Tel: (800) AVI-2131 · (702) 800-0005 2455 W Cheyenne Ave, Suite 112 North Las Vegas, NV 89032 www.smartavi.com HDMI KVM Switch with USB 2.0 Support and OSD 11PDFium PDFium