ATEN 2XRT-0015G KVM over IP Access Control Box
Simply Better Connections
Product Overview
The ATEN 2XRT-0015G KVM over IP Access Control Box allows users to enable or disable remote over IP control privilege by simply pressing a control button. When installed with the KVM over IP Series Transmitter, the 2XRT-0015G enables users to quickly and effortlessly enable or disable control privilege from the Receiver, ensuring operations are only permitted to the user at the local console.
Setup is fast and easy. Simply plug the 2XRT-0015G's cables into the KVM over IP transmitter. No software installation or device configuration is required – it's plug and play. The cable length of the 2XRT-0015G reaches 5 meters, allowing for connection to the transmitter over longer distances for more flexible installation.
Note:
- For some rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.
- The slide switch on the rear side of the KVM over IP Transmitter needs to be switched to the RS-232 Config / Access Control position.
- Connect the RS-232 connector of the 2XRT-0015G to the RS-232 Port of the KVM over IP Transmitter and connect the USB connector of the 2XRT-0015G to a computer for USB bus-power supply.
Features
- Users at the Tx local console can enable / disable Rx control privilege by simply pressing a control button.
- Plug-and-Play - no software installation required on either side.
- USB bus-powered design - no external power adapter required.
- Easy to operate.
- Cable length reaches 5m for more flexible installation.
Specifications
| Function | 2XRT-0015G |
|---|---|
| Connectors | Link: USB, PS/2, RJ-11, RS-232 |
| LEDs | Status: Pressed: Red Light; Released: Dim |
| Physical Properties | Housing: Plastic |
| Weight: 0.43 kg (0.95 lb) | |
| Dimensions (L x W x H): 7.20 x 10.39 x 11.00 cm (2.83 x 4.09 x 4.33 in.) |
Diagram
The diagram illustrates the connection between the 2XRT-0015G Access Control Box and a KVM over IP Transmitter. The 2XRT-0015G has an RS-232 connector and a USB connector. The KVM over IP Transmitter has an RS-232 port and a USB port. The diagram shows a switch on the transmitter labeled "RS-232 CONFIG ACCESS CONTROL" with options for "AUTO" and "LOCAL". The 2XRT-0015G is connected to the transmitter via RS-232 and USB, and the transmitter is connected to a computer via USB.
