User Guide for MiBOXER models including: LDRF-RGB6-TC4 2.4G Touch Screen RGB LED Control System, LDRF-RGB6-TC4, 2.4G Touch Screen RGB LED Control System, Touch Screen RGB LED Control System, RGB LED Control System, LED Control System, Control System
Subordinate New Brand 2.4G Touch Screen RGB LED Control System Model NO.: LDRF-RGB6-TC4 1. Product Descripon This system is a high-performance RGBW led touch remote controller, adopng the most advanced PWM control technology, controlling all RGBW led products with five lines and four circuits (common anode), owning 640 thousand colors and 20 automacal changing modes to choose. Also, It has the memory funcon(that is to say, the previous sengs will be resumed when power on again). lt is widely used in led RGBW LED strip light, led module and so on. With the technology of the 2.4G high frequency wireless remote control, it has the characteriscs of low power consumpon, long distance transmission, and strong an-interference ability, high speed telecommunicaons, etc. The remote looks fashionable and elegant , with simple and praccal funcons of color changing and brightness dimming, the capacive touch screen design makes the remote easy to use. The modular design and easy screwed terminals enable the controller easy to match with all kinds of led light products. AC DC12V/24V AC to DC Power 1 Power 2 2. Funcon of keys 1.ON 3. Program List 4.lndicang light 5.Speed + 6.Brightness + 7.Brightness - 8.Speed - Number Mode Brightness state 1 Stac white color Adjustable 2 White color gradual changes Adjustable 3 All colors gradual change Adjustable 4 Red/green/blue three colors gradual change Adjustable 5 Seven colors jump to change Adjustable 6 Three colors jump to change Adjustable 7 Red/ green jumps to change Adjustable 8 Red/blue jumps to change Adjustable 9 Blue/green jumps to change Adjustable 10 White color frequently blinks Adjustable 11 White color gliers Adjustable 12 Red color frequently blinks Adjustable 13 Red color gliers Adjustable 14 Green color frequently blinks Adjustable 15 Green color gliers Adjustable 16 Blue color frequently blinks Adjustable 17 Blue color gliers Adjustable 18 Yellow color frequently blinks Adjustable 19 Yellow color gliers Adjustable 20 Circulaon mode 2.OFF 3.Color ring 9.Mode + 10.Mode - Speed state Unadjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable 4. Programming(code clearing and code matching) Code matching: For a new kit (remote & controller), the remote can work only when it is programmed to the controller. Please follow the below instrucons: Correctly connect the power supply, LED controller and LED load. Switch off the power, then switch on again, and press key 5 once (within 3 seconds) the moment you see the light is on. The LED light blinks twice slowly when it is done. Code clearing: The code can be cleared as needed. The kit (remote and controller) will stay in the original state aer code clearing. lt can work when code rematching is done. Please follow the below instrucons: Also, correctly connect the power supply, LED controller and LED load. Switch off the power, then switch on again, and long press key 5 (within 3 seconds) the moment you see the light is on. The LED light blinks nine mes swily when it is done. Aenon: 1. The regular product for sale is a kit (remote and controller). The user can re-programme freely as needed. One remote can control countless controllers, but one controller can only be controlled by four remotes (Max). 2. Please check whether the voltage of the power supply matches the controller and light, and please check the connection on of both the cathode and anode before applying power. 3. Ensure supply power is off before performing any installation or wiring procedures. 4. Using the light/controller in the place with metal or concrete structures or electromagnetic interference will cause issues with communication and communication range. 5. Aenon 1. Please check whether the input voltage of the constant voltage power supply is in accordance with the controller, and please check the connecon of both the cathode and anode, otherwise the controller will be broken. 2. Please don't connect wires with power on. Please switch on again only when it is in right connecon and no short circuit. 3. Please keep your finger off the touch ring when installing the baeries, to improve its sensivity, and use the remote (3 seconds later) aer the baeries are installed. Please reinstall the baeries, if the touch ring is found low-sensivity. 4. Please do not use the controller in the place with widely range metal area or strong electromagnec wave nearby, otherwise, the remote distance will be seriously affected. Made in ChinaAdobe PDF library 15.00 Adobe Illustrator CC 22.0 (Windows)