Vetroo V5 CPU Air Cooler Installation Guide
Part List
- CPU Cooler
- Backplate for Intel
- Bracket Screw
- Fan Clips
- Intel Bracket
- AMD Bracket
- Thermal Grease
Intel Installation
-
Step 1
Please remove the fan before install by opening clips on the side.
-
Step 2
Install the Intel bracket on the cooler base and tighten it with the screws. Evenly spread the thermal grease on the surface of the CPU and remove the bottom film of the radiator.
-
Step 3
Adjust the screw on the bracket to the corresponding position according to the motherboard type. (Supports LGA7700/1200/115X)
-
Step 4
Place the radiator on the CPU while aligning the support screw to the backplate and motherboard.
-
Step 5
Install the fan. Connect the 5V Spin fan wire to the motherboard's 5V Spin port, and connect the 12V 4-Pin wire to the CPU FAN port of the motherboard.
AMD Installation
-
Step 1
Please remove the fan before install by opening clips on the side.
-
Step 2
Install the AMD bracket on the cooler base and tighten it with the screws.
-
Step 3
Remove the original AMD bracket part and keep the installation backplate.
-
Step 4
Evenly spread the thermal grease on the surface of the CPU and remove the bottom film of the radiator.
-
Step 5
Adjust the backplate to the corresponding position and lock it into the motherboard. (Supports AM5/AM4/AM3+/AM2+/FM2+/FM1/FM2/FM1)
-
Step 6
Place the radiator on the CPU while aligning the support screw to the backplate and motherboard.
-
Step 7
Install the fan. Connect the 5V Spin fan wire to the motherboard's 5V Spin port, and connect the 12V 4-Pin wire to the CPU FAN port of the motherboard.