Lian Li O11 Dynamic Razer Edition Installation Guide
This guide provides detailed instructions for installing components into the Lian Li O11 Dynamic Razer Edition PC case.
Case Components
The Lian Li O11 Dynamic Razer Edition case features the following components:
- A: Power switch / 電源開關按鍵 / 電源スイッチ
- B: Multi-media ports (USB 3.0 x 2, USB 3.1 Type-C, HD audio) / 多媒體連接埠/マルチメディアI/Oポート
- C: Spare 120 mm fans x 3 or 140 mm fans x 2 / 預留 120mm風扇x3或 140 mm 風扇 x2 / 追加120mm ファン x3 または140mmファン x2
- D: PCI slots with ventilation / PCI 通風擋片/ 通気構造のPCIスロット
- E: 2.5" HDD x2 / 2.5吋硬碟x 2 / 2.5″ HDDマウントスペースx2
- F: Removable HDD tray (3.5" HDD x 2 or 2.5" HDD x 2 or PSU x 1) / 可拆硬碟托盤/ リムーバブルHDDトレイ
- G: Removable HDD tray (3.5" HDD x 1 + 2.5" HDD x 1 or 2.5" HDD x 2 ) / 可拆硬碟托盤/リムーバブルHDDトレイ
- H: PSU tray / 電源供應器裝置槽 / 電源ユニット固定ステー
- I: Spare 120 mm fans x 3 / 預留 120 mm 風扇 x 3 / 追加120mm ファン x3
- J: Spare 120 mm fans x 3 / 預留 120 mm 風扇 x 3 / 追加120mm ファン x3
Hardware List
The following hardware is included:
- a: 17 pcs Screws for motherboard & 2.5" HDD mount
- b: 3 pcs Stand-off bolt (Spare parts) for motherboard mount
- c: 4 pcs Screws for PSU mounting
- d: 16 pcs Screws for 2.5" HDD mount
- e: 12 pcs Screws for 3.5" HDD mount
- f: 4 pcs Velcro for cable management
- g: 1 piece Rubber pad for PSU mounting
- h: 1 piece VGA anti-sag bracket for VGA card mount
- i: Tool, 2 pcs Longer stand-off bolt for VGA anti-sag bracket mounting
- j: 2 pcs Screws for VGA anti-sag bracket mounting
Note: Exceeded quantity are spare parts.
Assembly Instructions
-
Remove Top Panel
Remove 2 thumb screws to release the top panel.
-
Remove Side Glass & Front Glass
Pull to release the glass. Attention: Peel the protective film on both sides.
-
PSU Installation
Install the PSU into the PSU tray.
-
Motherboard Installation
Mount the motherboard using the provided stand-off bolts and screws.
-
2.5"/3.5" HDD Installation
Install 2.5" and 3.5" HDDs into the designated trays and mounts.
-
2.5" HDD Installation
Install 2.5" HDDs into their respective mounts.
-
Remove Air Filters
Remove the top, side, and bottom air filters for cleaning or maintenance.
-
Cable Management
Organize cables using the provided Velcro ties and routing points.
-
Radiator & Cooling Support
The case supports various radiator and fan sizes, including:
- 120 x 120 mm
- 120 x 240 mm
- 120 x 360 mm
- 140 x 140 mm
- 140 x 280 mm
-
Hardware Clearance
Check the following clearances for components:
- CPU air cooler: 155 mm
- GPU: 159 mm
- PSU with bracket: 210 mm
- PSU without bracket: 170 mm
- Radiator clearance: 90 mm (top), 85 mm (bottom)
-
VGA Anti-sag Bracket Installation
Install the anti-sag bracket to support the graphics card. Loosen the screw for displacement as needed.
-
Optional Kits
- Upright Display Card Kits: Supports 200 mm PCI-e Express 16X Riser Card Adapter Extender Cable Kit. Compatible with PCI-e 2.0 and 3.0, offering high bandwidth and data rates up to 8 Gbps.
-
I/O Port Installation
Connect the USB 3.0 and HD Audio headers to the motherboard. Refer to the pinout diagram for correct connections.
-
LED Control Board Installation
Install the LED control board and connect it to the front, left, and right LED bars using the provided USB cable.
Specifications
Model: 011D-1 X
Package Content includes 4 pcs of each type of riser card adapter.
