Sunricher KNX Smart Home Automation
KNX Control System Overview
The KNX Control System diagram illustrates a central KNX Bus connecting various devices. At the top, KNX Bus Power supplies the system. A KNX Master USB Interface connects to a PC via RS232. Devices connected to the KNX Bus include a KNX Touch Panel, KNX Keypad, KNX Sensor, and two KNX Actuators (one for DIN RAIL installation). A new KNX to DALI Gateway links KNX to DALI systems. Finally, a KNX Dimmable Driver is shown connected to the KNX Bus.
Key components of the KNX Control System include:
- KNX Bus Power
- KNX Master USB Interface
- KNX Touch Panel
- KNX Keypad
- KNX Actuator (DIN RAIL installation)
- KNX Sensor
- KNX Actuator
- KNX to DALI Gateway (NEW)
- KNX Bus
- KNX Dimmable Driver
KNX Product Range
KNX Actuators
Features:
- DC-DC, 4 channels output
- Switch/relative dimming via manual buttons
- Preset value and modify preset value functions
- Up to 64 scenes
- Bus recovery (or reset) function
- Status report, error report
- Complies with EN 50090 & EN 13321-1
| Model | Input Voltage | Output Current | Output Power | Feature |
|---|---|---|---|---|
| SR-KNX9501FA | 12-36Vdc | 5A*4CH | 240-720W | DIN RAIL installation, DIM |
| SR-KNX9511FA | 12-36Vdc | 5A*4CH | 240-720W | DIN RAIL installation, RGBW |
| SR-KNX9502FA | 12-36Vdc | 5A*4CH | 240-720W | Flip type, DIM |
| SR-KNX9512A | 12-36Vdc | 5A*4CH | 240-720W | Flip type, RGBW |
Dimmable Drivers (Constant Voltage)
Features:
- Built-in KNX interface, KNX/EIB Bus Connection Terminal
- Support Physical Address and Group Address
- Relative Dimming Control, Absolute Dimming Control, Scene Control, On/Off Switching
- Commission and Project Design with ETS5
- High power factor and efficiency
- Smooth and deep dimming to 0.1%
- Built-in active PFC function
- SELV compliant
| Model | Dimming interface | Output Channel | Input Voltage | Output Voltage | Output Current | Output Power | Power Factor | Efficiency |
|---|---|---|---|---|---|---|---|---|
| SRP-KNX9512-24-100CVF | KNX | 4CH | 100-240Vac | 24Vdc | 4.1A | 100W | >0.9 | 90% |
| SRPC-KNX9512-24-200CVF | KNX | 4CH | 100-277Vac | 24Vdc | Max. 4.1A/CH, total 8.4A | 200W | >0.98 | 93% |
Dimming & Switching Actuators
KNX for 0/1-10V LED Dimmer
Features:
- 0/1-10V control function
- Switching the light
- Relative dimming
- Absolute dimming
- Status report
- Setting 15 scenes
- Staircase lighting function
- Preset value and modify preset value functions
- Manual operation available
| Model | Input Voltage | Current Consumption | Output Voltage | Switch Current |
|---|---|---|---|---|
| SR-KNX9520FA-DIN | 21-30V DC, via the EIB bus | <12mA | 1-10V (passive), max.100mA per control output | 16A/250Vac |
KNX Universal-Dimmer
Features:
- Switching the light
- Relative dimming
- Absolute dimming
- Status report
- Setting 15 scenes
- Staircase lighting function
- Preset value and modify preset value functions
- Manual operation available
| Model | Input Voltage | Switch Voltage | Switch Capacity |
|---|---|---|---|
| SR-KNX9530FA-DIN | 200-230Vac | 200-230Vac | 6197/12-101-500=4x10-210W/VA, 6197/13-101-500=4x10-315W/VA, 6197/14-101-500=6x40-315W/VA, 6197/15-101-500=4x40-600W/VA |
KNX Push Buttons
Features:
- Commission and Project Design with ETS5
- Configurable Bicolored LED Indicator for Each Button
- Extensive Operating Functions
- Switching and Dimming Function
- Scene Recall and Storage Function
- Roller Blinds and Shutter Function
- Push Buttons can be adjusted for 1 or 2 button operation
- Powered by KNX Bus Power Supply
Available Models: SR-KN9551K2, SR-KN9551K4, SR-KN9551K8, SR-KN9551K2-WSK, SR-KN9551K4-WSK, SR-KN9551K8-WSK, SR-2423K8-KN, SR-KN9551NK2-PL, SR-KN9551NK4-PL, SR-KN9551NK8-PL.
KNX Touch Panels
Features:
- Label can be printed and customized with the attached PVC paper
- Configurable bicolored LED indicator for each button
- Commission and project design with ETS5
- Switching and dimming, Scene recall and storage, Roller blinds and shutter function
- Touch keys can be adjusted for 1 or 2 button operation
- Easy installation with a mounting bracket
- Powered by KNX Bus Power Supply
Available Models: SR-KN9551T4, SR-KN9551T8.
KNX Sensors
Features:
- Comply to KNX standard protocol EN 50090 & EN 13321-1 and in compliance with KNX products from other international incorporation.
- Can set the delay time
- Can set the brightness value
- Detection range: 5m-7m
- Detection horizontal angle: >120°
- With free stickers on the back easy to be installed and uninstalled
- Can prevent the pets interference
| Model | Input Voltage | Detection Angle | Current Consumption | Feature |
|---|---|---|---|---|
| SR-KNX9522PIR-W | Power by KNX bus | 150° (wall), 360° (ceiling) | <10mA | Wall installation |
KNX to 2 Channel DALI Gateway
Features:
- KNX to DALI gateway
- Integrates DALI into KNX system
- 2 channels DALI output
- Each DALI channel with 250mA DALI PS output
- No extra DALI PS required, simple wiring
- Supports all DALI DT6 & DT8 device types
- Mini USB port to connect to DALI PC software
- Programmable through ETS software
- DALI bus state monitor indicator
| Model | Input Power | Input Signal | KNX Bus Voltage | Output | Output Voltage | Output Current | Feature |
|---|---|---|---|---|---|---|---|
| SR-KN9100/DA2-2CH | 100-240VAC | KNX | 21-30V DC, via the KNX/EIB bus | 2 Channels DALI | 16VDC | 2*250mA | |
| SR-KN9100U/DA2-2CH (NEW) | 100-240VAC | KNX | 21-30V DC, via the KNX/EIB bus | 2 Channels DALI | 16VDC | 2*250mA | Supports DALI-2 input devices, such as push buttons, sensors etc |
For more information, visit www.sunricher.com.
