Ortofon Quintet Series Cartridge Installation

Introduction

This guide provides essential steps for installing and setting up your Ortofon Quintet Series phono cartridge, ensuring optimal performance and sound quality.

Installation Steps

Step 1: Connecting the Wires

Carefully connect the tonearm wires to the corresponding pins on the Ortofon Quintet cartridge. The standard color coding is:

• R (Right Channel): Red wire
• G (Ground/Left Channel): Green wire
• B (Left Channel): Blue wire
• L (Ground): White wire

Use a small screwdriver to ensure secure connections.

Step 2: Mounting the Cartridge

Secure the Ortofon Quintet cartridge to your turntable's headshell using the provided mounting screws. Ensure the cartridge is aligned correctly before tightening.

Step 3: Inserting the Cartridge

Gently insert the mounted cartridge into the tonearm, ensuring it is seated properly. ➡️

Step 4: Setting the Tracking Force

Set the vertical tracking force (VTF) for your Ortofon Quintet cartridge. The recommended tracking force is 2.3 grams.

Support and Resources

For further assistance, FAQs, and detailed product information, please visit the Ortofon support page:

www.ortofon.com/support [Link to Support]

Important Information

Please observe the following warnings:

• [Age/Small Parts Warning] For users aged 5 and above.
• [Handling Warning] Avoid improper handling or touching sensitive parts.