DarkRock EC2 PC Case User Manual
Product Specifications
- Material: SPCC Steel
- Chassis Dimensions: (H)447 x (W)218 x (D)385mm
- Motherboard Compatibility: ATX / Micro ATX / ITX
- I/O Port: 1x TYPE-C / 2x USB3.0 / AUDIO
- 3.5" + 2.5" Drive Bays: 2+2 or 1+3
- PCIE Slots: 7
- Max CPU Cooler Height: 165mm
- Max GPU Length: 340mm
- Max PSU Length: 200mm
- Cooling Fans Support: Front: 120mm x3, Top: 120mm x2/140mm x2, Rear: 120mm x1
- PSU Shroud Fan Support: 120mm x2
- Liquid Cooling Support: Front: 360/240mm, Top: 240mm, Rear: 120mm
Accessories Included
- M3 5mm Screws x14 (Motherboard / SSD)
- #6-32 6.5mm Studs x3 (Motherboard stud)
- #6-32 6mm Screws x8 (PSU / Graphics card)
- HDD Screws x8 (3.5" HDD)
- Cable Ties x8 (Cable management)
- 120mm Black Fan x1 (Pre-installed on rear)
Installation Guide
A. Remove the panel
Instructions for removing the side panel.
B. Install motherboard
Diagram showing motherboard mounting positions for ATX, Micro-ATX, and ITX form factors.
C. Install power supply
Diagram illustrating the installation of the power supply unit.
D. Install fan and liquid radiator
Details on fan and radiator mounting options for front, top, and rear. Includes a note for 240mm water cooler installation on top, recommending fixing holes indicated by arrows. Also notes to connect I/O panel cable and install fans before the motherboard.
E. Install HDD & SSD
Diagram showing the placement for installing HDDs and SSDs.
F. Install Graphics card
Diagram illustrating the installation of a graphics card.
G. I/O panel
Diagram showing the front panel I/O ports: POWER, RESET, USB 3.0, AUDIO, TYPE-C. Also shows output cable ports for LED/RGB SW, POWER SW, RESET SW, H.D.D LED, POWER LED+, POWER LED- and their corresponding connections to the motherboard's F_PANEL header, USB 3.0, HD AUDIO, and TYPE-C ports.
