LEDYi Lighting | Custom LED Strip Manufacturer with Free Samples Since 2011
Owner's Manual for LEDYI models including: S1617 Sauna LED Neon Flex, S1617, Sauna LED Neon Flex, LED Neon Flex, Neon Flex, Flex
20 feb 2025 — Using Dow Corning's high light transmittance, environmentally friendly silicone material,co-extrusion molding process, with he at and moistur e resistance, ...
File Info : application/pdf, 13 Pages, 1.01MB
DocumentDocumentLED NEON FLEX SPECIFICATION SAUNA IP67 NEON 1617 24V SIDE VIEW Note: LEDYI may change product specifications and installation guidance without prior notice. SAUNA IP67 NEON 1617 24V SIDE VIEW · Using Dow Corning's high light transmittance, environmentally friendly silicone material,co-extrusion molding process, with he at and moistur e resistance, can withstand high temperature and humid en vironment, specially designed for sauna environment; · IP67 waterproof, ensure durability, prevent dust and water from entering, in the steam and heat, the lamp strip can continue to effectively illuminate the sauna space; · Low voltage power supply, high safety; · Using Lumileds leds, excellent performance, high temperature environment can also maintain stable work; · A variety of colors are available, which can be compatible with the intelligent control system to achieve remote control and automatic adjustment, helping to create a peaceful and relaxing atmosphere, relieve stress and enhance the sauna experience; · Ambient temperature: -25¥~105¥, three-year warranty. 2700k3000k3500k4000k5000k6500k R G B Dimensions & Waterproof 50000 hours LM80 3 One Bin Solvent resistant Saltwater resistant UV protected Cuttable Lifetime Compliant CRI >90 5004±7mm 16mm 9.0±1mm 17mm Electrical Parameter 300±15mm 16±0.2mm Cross section Specification 17±0.2mm 200mm Luminous surface Min bending diameter Luminous surface Bend horizontal only Voltage LED PIN Temperature Storage Temperature Ambient Temperature CRI Length Standard Length Range (M) 0M<Neon Strip(L)5M 5M<Neon Strip(L)10M 10M<Neon Strip(L)15M DC24V Max. 120°C -25°C~ 60°C Min.-25°CMax ( Table below ) 90 Final Length Integral end cap L+5 L+5 L+5 Tolerance ±7 ±10 ±13 Light Distribution Curve Power 5w/m Efficacy@4000K CV : 84.2lm/w CC : 65.4lm/w Max Ambient Temperature 105°C Due to the tolerance of the production and electrical components, output value and electrical power can very up to 10% Length Range (M) 15M<Neon Strip(L)20M 20M<Neon Strip(L)25M Iuminance curve Final Length Integral end cap L+5 L+5 Tolerance ±16 ±19 Note: The above date is based on 24V ,5W/M,single colour with 4000k colour temperature.If you need IES files for other types.Please contact our sales department. Web: www.ledyi.com | Mail: sales@ledyi.com | Tel.: +86 0755 2302 5890 | Copyright©2025 LEDYI LIGHTING CO., LIMITED | All Rights Reserved 1/12 SAUNA IP67 NEON 1617 24V SIDE VIEW Single color ( CV ) CCT(K) 2700 3000 3500 4000 5000 6500 SDCM CRI 3 90 3 90 3 90 3 90 4 90 5 90 Voltage DC24V DC24V DC24V DC24V DC24V DC24V Power(W) 5 5 5 5 5 5 Lumen (LM/M) 377 385 415 421 421 404 Efficiency (LM/W) 75.3 77.0 83.0 84.2 84.2 80.7 Unit Length (mm) 50 50 50 50 50 50 Max. Run Length (M) 10 10 10 10 10 10 CC/CV CV CV CV CV CV CV Single color ( CC ) CCT(K) 2700 3000 3500 4000 5000 6500 SDCM CRI 3 90 3 90 3 90 3 90 4 90 5 90 Voltage DC24V DC24V DC24V DC24V DC24V DC24V Power(W) 5 5 5 5 5 5 Lumen (LM/M) 302 312 326 327 327 325 CCT Tunable CCT(K) CRI 2700 ±150 90 6500 ±500 90 2700+6500 90 Voltage DC24V DC24V DC24V Power(W) 5 5 5 Lumen (LM/M) 386 412 419 Efficiency (LM/W) 60.4 62.4 65.1 65.4 65.4 64.9 Unit Length (mm) 50 50 50 50 50 50 Max. Run Length (M) 24 24 24 24 24 24 CC/CV CC CC CC CC CC CC Efficiency (LM/W) 77.2 82.3 83.7 Unit Length (mm) 71.4 71.4 71.4 Max. Run Length (M) 5 5 5 CC/CV CV CV CV Web: www.ledyi.com | Mail: sales@ledyi.com | Tel.: +86 0755 2302 5890 | Copyright©2025 LEDYI LIGHTING CO., LIMITED | All Rights Reserved 2/12 SAUNA IP67 NEON 1617 24V SIDE VIEW RGBW CCT(K) CRI R -- G -- B -- 2700 +50 -250 80 RGBW -- R -- G -- B -- 3000 +50 -300 80 RGBW -- R -- G -- B -- W : 3200 +250 -150 80 RGBW -- R -- G -- B -- W : 3500 +350 -150 80 RGBW -- R -- G -- B -- W : 4500 +200 -400 80 RGBW -- R -- G -- B -- W : 5700 +250 -750 80 RGBW -- Voltage DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V DC24V Power(W) 2.5 2.5 2.5 2.5 10 2.5 2.5 2.5 2.5 10 2.5 2.5 2.5 2.5 10 2.5 2.5 2.5 2.5 10 2.5 2.5 2.5 2.5 10 2.5 2.5 2.5 2.5 10 Lumen (LM/M) 73 222 43 182 527 71 183 44 189 484 63 205 45 197 509 67 214 45 187 517 63 193 42 184 482 66 202 42 184 496 Efficiency (LM/W) 29.0 88.8 17.0 72.8 52.7 28.4 73.2 17.7 75.4 48.4 25.2 81.9 17.9 78.8 50.9 26.6 85.7 18.0 74.8 51.7 25.1 77.1 16.7 73.6 48.2 26.4 80.8 16.7 73.5 49.6 Unit Length (mm) 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 83.3 Max. Run Length (M) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 CC/CV CV CV CV CV CV CV CV CV CV CV CV CV CV CV CV CV CV CV CV CV CV CV CV CV CV CV CV CV CV CV The maximum series length refers to the maximum single end power supply length of the constant current strip under the condition of standard 30cm wire . For the load capacity of the solder free end cap, please refer to <The Maximum Load Capacity of Power Cables> The given color temperature is the temperature of finished product. The given data are typical values due to the tolerances of the production process and the electrical components, values for light output and electrical power can vary up to 10%. All products can be dimmed; the dimmer's voltage should conform to the rated voltage of the led light. The output frequency of the dimmer of the constant-current led light should be less than 2K Hz, and the output PWM can control the led light Web: www.ledyi.com | Mail: sales@ledyi.com | Tel.: +86 0755 2302 5890 | Copyright©2025 LEDYI LIGHTING CO., LIMITED | All Rights Reserved 3/12 SAUNA IP67 NEON 1617 24V SIDE VIEW Cable Entry Integral End Cap (IP67) 2 17 10 16 11 17 17 25 10 18 17 26 15.7 9.5 20 2 17 16 Front Cable Entry Cable Cable Type Silicone Cable Waterproof Connector with Silicone Cable Side Cable Entry Bottom Cable Entry Closed End cap Schematic Diagram 15 45 45 Specification Core OD6.0mm / Inner core20AWG OD6.0mm / Inner core20AWG OD6.4mm / Inner core Red/Black--20AWG Green/Blue/White--22AWG OD6.0mm /Inner core20AWG M12Male / Female connecto OD6.0mm /Inner core20AWG M12Male / Female connecto OD6.4mm / Inner core Red/Black--20AWG Green/Blue/White--22AWG M12Male / Female connecto Electrical Properties Red V+aBlack VBlack V+aWhite WaYellow WW Black V+aWhite WaBlue BaGreen GaRed R Red V+aBlack VBlack V+aWhite WaYellow WW Black V+aWhite WaBlue BaGreen GaRed R Web: www.ledyi.com | Mail: sales@ledyi.com | Tel.: +86 0755 2302 5890 | Copyright©2025 LEDYI LIGHTING CO., LIMITED | All Rights Reserved 4/12 SAUNA IP67 NEON 1617 24V SIDE VIEW Cutting Mark Cutting Mark Remark: The bottom of the led strip doesn't have transparent window, the black marker is the cutting position Accessories Use professional scissors to cut vertically at the cutting mark PC Profile PC Profile Please don't be feel free to cut and cut into an oblique angle or cambered section. PC Profile 31.2 4-3.5 6 23.5±0.2 R1.75 3.5 23.5±0.2 3.5 19.4 50 300 4-10 1000±0.5 Length: 1000X19.4X31.2 Accessories: Screw M3X16cSUS304 100±0.2 1000±0.5 100±0.2 100±0.2 20±0.2 3-10 500±0.5 Length: 1000X20X23.5 Accessories: Screw M3X16cSUS304 20±0.2 10 35±0.3 Length: 35X20X23.5 Accessories: Screw M3X16cSUS304 Web: www.ledyi.com | Mail: sales@ledyi.com | Tel.: +86 0755 2302 5890 | Copyright©2025 LEDYI LIGHTING CO., LIMITED | All Rights Reserved 5/12 SAUNA IP67 NEON 1617 24V SIDE VIEW Single Color Connection Diagram Tunable white Connection Diagram Web: www.ledyi.com | Mail: sales@ledyi.com | Tel.: +86 0755 2302 5890 | Copyright©2025 LEDYI LIGHTING CO., LIMITED | All Rights Reserved 6/12 SAUNA IP67 NEON 1617 24V SIDE VIEW RGB Connection Diagram Web: www.ledyi.com | Mail: sales@ledyi.com | Tel.: +86 0755 2302 5890 | Copyright©2025 LEDYI LIGHTING CO., LIMITED | All Rights Reserved 7/12 SAUNA IP67 NEON 1617 24V SIDE VIEW Installation Precautions Do not shake left and right within 150mm of the end cap and led neon'body. 150mm 150mm Do not twist the light Do not suspend the power cable Put it in the profile Do not leave the light hanging in the air Prohibit trample Small Angle bending is prohibited - Please press the led strip with your palm to slowly insert the led strip into the groove, and gently straighten the led strip above the groove with your right hand. - Try to keep the led strip in a flat state during the installation process. - Do not press the led strip with a single finger, it is easy to damage the internal parts of the led strip. - The bent arc of the led strip should not be too large during installation. Web: www.ledyi.com | Mail: sales@ledyi.com | Tel.: +86 0755 2302 5890 | Copyright©2025 LEDYI LIGHTING CO., LIMITED | All Rights Reserved 8/12 SAUNA IP67 NEON 1617 24V SIDE VIEW Installation Precautions--Side Mounted ( If the length of the light is more than 2 meters, two persons must work together to install it. ) Figure 1 Figure 2 Luminous Surface To bend or droop from the luminous surface Side surface may not be bent or droop. 1.Installer: - Press the light with the palm of the left hand to slowly load it into the slot. Straighten the light with right hand so that it droop it in the direction of your hand. See Figure 1. - Side surface may not be bent or droopSee Figure 2. 2. Assistant: -Cooperate with the installer to lift the reel of the light, and then slowly deliver the light to installer. Do not pull or twist the light during the installation. Web: www.ledyi.com | Mail: sales@ledyi.com | Tel.: +86 0755 2302 5890 | Copyright©2025 LEDYI LIGHTING CO., LIMITED | All Rights Reserved 9/12 SAUNA IP67 NEON 1617 24V SIDE VIEW Installation Precautions--Side Mounted ( If the length of the light is more than 5 meters, two persons must work together to install it. ) Figure 1 Figure 2 Luminous Surface To bend or droop from the luminous surface Side surface may not be bent or droop. 1.Installer: - Press the light with the palm of the left hand to slowly load it into the slot. Straighten the light with right hand so that it droop it in the direction of your hand. See Figure 1. - Side surface may not be bent or droopSee Figure 2. 2.Assistant: - Cooperate with the installer to slowly deliver the light to installer. Do not pull or twist the light during the installation. Web: www.ledyi.com | Mail: sales@ledyi.com | Tel.: +86 0755 2302 5890 | Copyright©2025 LEDYI LIGHTING CO., LIMITED | All Rights Reserved 10/12 SAUNA IP67 NEON 1617 24V SIDE VIEW Installation Precautions--Top Mounted ( If the length of the light is more than 2 meters, two persons must work together to install it. ) Figure 1 To bend or droop from the luminous surface Figure 2 Side surface may not be bent or droop. 1.Installer: - Press the light with the palm of the left hand to slowly load it into the Slot. Straighten the light with right hand, hold it and rotate it 90° to droop it in the direction of your hand.See Figure 1. - Side surface may not be bent or droopSee Figure 2. 2.Assistant: - Cooperate with the installer to slowly deliver the light to installer. Do not pull or twist the light during the installation. Web: www.ledyi.com | Mail: sales@ledyi.com | Tel.: +86 0755 2302 5890 | Copyright©2025 LEDYI LIGHTING CO., LIMITED | All Rights Reserved 11/12 SAUNA IP67 NEON 1617 24V SIDE VIEW Notes The selection of the cable specification at the output end of the power supply, it depends on the total current of the load and the length of the cable. It is recommended to select according to the following table: Current of the light 1A 2A 3A 4A 5A 6A 7A 8A 9A 10A L=1M AWG26 AWG23 AWG22 AWG21 AWG20 AWG18 AWG18 AWG17 AWG17 AWG16 L=2M AWG23 AWG21 AWG18 AWG18 AWG17 AWG16 AWG15 AWG15 AWG14 AWG14 L=4M AWG21 AWG18 AWG16 AWG15 AWG14 AWG13 AWG12 AWG12 AWG11 AWG11 Specifications of the cable L=6M L=8M AWG18 AWG18 AWG16 AWG15 AWG14 AWG13 AWG13 AWG12 AWG12 AWG11 AWG11 AWG10 AWG11 AWG9 AWG10 AWG9 AWG10 AWG8 AWG9 AWG8 L=10M AWG17 AWG14 AWG12 AWG11 AWG10 AWG9 AWG8 AWG8 AWG7 AWG7 L=12M AWG16 AWG13 AWG11 AWG10 AWG9 AWG8 AWG8 AWG7 AWG7 AWG6 L=14M AWG15 AWG12 AWG11 AWG9 AWG9 AWG8 AWG7 AWG7 AWG6 AWG6 L=16M AWG15 AWG12 AWG10 AWG9 AWG8 AWG7 AWG6 AWG6 AWG5 AWG5 ¸The unused light should be sealed with the packaging bag to avoid prolonged exposure. ¸Please use DC24V isolated constant voltage power supply with ripple voltage less than 5%. Using other types of power supply may damage the light or cause other safety risks. ¸In practical application, 20% allowance should be reserved for power supply to ensure the stability of power supply. ¸It is recommended that professionals connect the power supply. Do not connect the power supply with live power to avoid electric shock. ¸Please confirm whether the voltage of the power supply is consistent with the voltage of the light; Pay attention to the positive and negative poles of the power cord, do not connect wrong, so as not to cause product damage; ¸When multiple power supplies are used, ensure that the positive poles of the power supply are not connected in parallel. Otherwise, the power supply system may be unstable or damaged after long-term operation. ¸If the actual application length exceeds the specified length, it will lead to overload, heating and uneven brightness of the light. ¸During installation, please do not scratch, twist, or bend the light irregularly. Otherwise, the light may be damaged beyond repair. ¸To ensure the life and reliability of the light, please do not over bend the light, which will damage the product itself. ¸To protect your eyes, please avoid staring at the glowing surface of the light for a long time. ¸Non-professionals are forbidden to install, disassemble and maintain the product. ¸Do not use any acid or alkaline adhesive to fix the light (including but not limited to glass glue, etc.) ¸IP67 products are not suitable for long-term immersion in water; IP68 products are only customized by the factory. After cutting and process- ing by users themselves, there is a risk that IP68 protection level cannot be reached ¸Because of the difference in structure, even if the same color temperature value, different sizes of light will look slightly different colors. Please confirm it before use. Tests showed that methanol and benzenes will have yellowing effects on silicone. In the newly decorated interior environment, epoxy floor paint, wall paint, wallpaper adhesive, various decoration materials or new furniture, they are likely to release of methanol and benzenes. It is recommended to remove methanol and benzenes first, or ventilate for a period of time in the newly decorated interior environment before install the silicone neon light, to avoid affecting the silicone body. Web: www.ledyi.com | Mail: sales@ledyi.com | Tel.: +86 0755 2302 5890 | Copyright©2025 LEDYI LIGHTING CO., LIMITED | All Rights Reserved 12/12