NZXT H5 Flow Compact Mid-Tower Airflow Case

1. Product Information

The NZXT H5 Flow is a compact mid-tower airflow case designed for optimal cooling and ease of use.

• 1.1 Exploded View

  The following components are included in the NZXT H5 Flow case:

  • 1. Top Filter
  • 2. Rear Exhaust Fan
  • 3. PCI Insert
  • 4. PSU Dust Filter
  • 5. Tempered Glass Panel
  • 6. Cable Bar
  • 7. Front Cooler Bracket
  • 8. Front I/O Module
  • 9. Right Side Panel
  • 10. Hard Drive Tray
  • 11. Fan Air Duct
  • 12. Bottom Air Intake Fan
  • 13. Front Filter
  • 14. Front Mesh Panel
  • 15. Bottom Fan Filter

• 1.2 Clearances and Specifications

  Dimensions:

  • Width: 227mm
  • Height: 464mm
  • Depth: 446mm

  Component Clearances:

  • Motherboard Support: ATX, Micro-ATX, mini-ITX
  • 2.5" SSD Support: 1+1
  • 3.5" HDD Support: 1
  • Expansion Slots: 7
  • Cable Management: max 23mm
  • GPU Clearance: max 365mm
  • CPU Cooler: max 165mm
  • Front Radiator Clearance: 45mm

• 1.3 Accessory Box

  The accessory box contains the following items:

  • A. Hexagon Screw 6-32 x 6mm (x4) - For power supply installation
  • B. Screw 6-32 x 5mm (x17) - For motherboard installation, 3.5 hard drive installation
  • C. Screw M3 x 5mm (x24) - For 2.5 hard drive installation
  • D. Screw KB5 x 10mm (x12) - For fan installation
  • E. Cable Ties (x10) - For cable management

2. Components & Ports

• 2.1 Cable Connections

  The case supports various cable connections:

  • Intel Standard F-Panel Header
  • USB 3.2 Gen 2 Type-C
  • USB 3.2 Gen 1 Type-A
  • HD Audio

• 2.2 Buttons and I/O

  The front panel features:

  • 1. Headset Jack
  • 2. USB 3.2 Gen 2 Type-C
  • 3. USB 3.2 Gen 1 Type-A
  • 4. Power Switch
  • 5. Power LED

• 2.3 Panel Removal

  Instructions for removing the case panels are provided with visual aids.

• 2.4 Cable Bar Removal

  Instructions for removing the cable bar are provided with visual aids.

• 2.5 Cable Management System

  The case includes dedicated channels for cable management:

  • Front I/O Cable and Fan Cable Channel
  • Fan Cable Channel
  • 24-pin Cable and SATA Cable Channel
  • 8-pin Cable Channel

• 2.6 Motherboard Installation

  Guidance on installing the motherboard is provided.

• 2.7 Storage Installation

  Instructions for installing 2.5" and 3.5" storage devices are included.

• 2.8 Expansion Card Installation

  Steps for installing expansion cards, such as graphics cards, are detailed.

• 2.9 Power Supply Installation

  Instructions for installing the power supply unit (PSU), including fan orientation, are provided. The PSU should be installed with the fan facing down.

• 2.10 Fan and Radiator Support

  The case supports the following fan and radiator configurations:

  • Fans:
  • Top: 2 x 120mm
  • Front: 2 x 140mm / 2 x 120mm
  • Rear: 1 x 120mm
  • Bottom: 1 x 120mm
  • Radiators:
  • Top: Up to 240mm
  • Front: Up to 280mm
  • Rear: Up to 120mm

• 2.11 Fan & Radiator Installation

  Detailed steps for installing fans and radiators are provided.

• 2.12 Bottom Fan Removal

  Instructions for removing the bottom fan are provided, referencing cable bar removal for easier access.

3. Downloading NZXT CAM

To control NZXT RGB & Fan Controller features, download and install the NZXT CAM software from www.nzxt.com/camapp.

4. Appendix

• 4.1 NZXT Global Warranty Policy

  This section details the terms and conditions of the NZXT Global Warranty Policy, including warranty length for new and refurbished products, what is and is not covered, exclusions of damages, limitations of implied warranties, how to obtain technical support and warranty service, applicable law, and additional legal rights for consumers in the UK and EU.

• 4.2 Support and Service

  For questions or problems with your NZXT product, contact NZXT support at service@nzxt.com. For comments and suggestions, email designer@nzxt.com. More information is available on the NZXT website: NZXT.com.

• 4.3 Regulations

  The computer case complies with FCC standards, Australian standards, and EU EMC Directive (2014/30/EU). It also complies with Canadian ICES-003(B) / NMB-003(B) for Class B personal computer cases.

• 4.4 Revision History

  Version 1.0, dated 2022/07/01.