Instructions for Visualizers models including: P4W and VZ4W Wireless Visualizers Wi-Fi Connection, P4W and VZ4W, Wireless Visualizers Wi-Fi Connection, Visualizers Wi-Fi Connection, Wi-Fi Connection, Connection
VIISAN Download Cameras
P4W & VZ4W Wireless Visualizers Wi-Fi Connection Instruction V1.2 WiFi AP Mode Connection 1. Switch to the Wi-Fi mode and the Wi-Fi LED indicator will be emitted green with flashing. 2. Open the wireless network list on the computer then select the [VZ4W_5G_xxxxxx] in the network list and input the password for connection (default: 88889999) to start the connection. 3. When the connection is successful, the Wi-Fi LED indicator will emit green light. 4. Launch VisualCam software and select the connection mode to "Direct Wi-Fi (AP Mode) Connection". PS. When the direct Wi-Fi AP mode is connected, the Internet will be disconnected. User can launch any web browser and enter the default IP [192.168.100.1] in the address bar. Setting Wi-Fi Client (STA) mode to connect to the Internet. WiFi Client (STA) Mode Connection 1. Switch to the Wi-Fi mode and the Wi-Fi LED indicator will be emitted green with flashing. 1. Open the wireless network list on the computer then select the [VZ4W_5G_xxxxxx] in the network list and input the password for connection (default: 88889999) to start the connection. 2. Open the web browser and enter the default IP [192.168.100.1] in the address bar. 3. Enter the login account [admin] and default password [9999] and click Login. 5. After logging to the web page, you can do the live preview and configure the settings on the web page. 1 2 No Item Function Descriptions 1 Wi-Fi Mode Select Client Mode 2 List of Wi-Fi Wireless Click the wireless device and the following image will be displayed. Network Device Names Enter the password to connect to various wireless network devices When the STA mode is configured, the VZ4W Wi-Fi will reconnect, and Wi-Fi LED indicator will emit blue light If successfully connected to the network, the device will be in Wi-Fi Client mode. If unable to connect to the network, switch to AP mode by pressing the resolution button on the control panel, or reset by pressing the Reset on the back panel. Setting the PC, or NB, to the same Wi-Fi-SSID,(ex:Mysher), Launch VisualCam software and select the connection mode to "WiFi STA (Client Mode) Connection". Web Page Settings Instruction V1.2 Web Page Menu Function Description 1. Login Screen 1 2 3 4 No Item 1 User Login Account Function Descriptions Enter user login account (default: admin) 2 User Password Enter user password (default: 9999) Save user login account and password to the browser. Remember user account 3 and password When you log in next time, there is no need to re-enter them 4 Login Log into the administrator screen on the website 2. Live Viewing 7 1 2 3 4 5 No Item 1 Preview window 2 Autofocus Lamp mode toggle 3 switch 4 Zoom In 5 Zoom Out 6 Rotate the image 7 Logout 6 Function Descriptions Display the screen currently captured by VZ4W Automatically adjust the image to have the best brightness and focusing performance Click lamp mode toggle switch: off / brightness 1 / brightness 2 / brightness 3 Zoom in image Zoom out image Rotate the image: 0° / 90° / 180° / 270° / Flip / Mirror Log out of the web page 3. RTSP Streaming Settings 1 2 3 4 5 6 7 No Item 1 Resolution 2 Bit Rate (kbps) 3 Port Number 4 Audio Setting 5 RTSP URL 6 Save 7 Cancel 8 Default 8 Function Descriptions Show or set the RTSP output resolution and fps Show or set the RTSP Bit rate (0 ~ 20000) Set the RTSP port (0 ~ 10000) Turn on/off RTSP audio Show current RTSP URL connection Save and change the RTSP streaming settings Cancel without saving Restore to default 4. Wi-Fi Setting (Access Point Mode) 1 7 2 3 4 5 6 8 9 No Item Function Descriptions 1 Wi-Fi Mode Select Access Point or Client Mode Switch between 5G / 2.4G under Wi-Fi Access 2 Wi-Fi 5G/2.4G Point mode 3 SSID VZ4W SSID of wireless network 4 Channel Select the channel based on different regions 5 Security Wi-Fi encryption setting 6 Password Connect the Wi-Fi SSID password 7 Show Password Show the Wi-Fi SSID password 8 Save Save and change the wireless network settings 9 Cancel Cancel without saving 5. Wi-Fi Setting (Client Mode) 1 2 3 4 5 6 7 8 9 No Item 1 Wi-Fi Mode 2 Scan 3 Disconnection 4 Remove Function Descriptions Select Access Point or Client Mode Scan nearby wireless network devices Disconnect from current wireless network device Remove the selected wireless network device from the list Click the wireless device and the following image will be displayed. Enter the password to connect to various wireless network devices List of Wi-Fi Wireless 5 Network Device Names 6 Device Name 7 Connection Status 8 Encryption 9 Signal Status Device name of wireless network Display the wireless network device to which VZ4W is currently connecting. If connected, the corresponding field of said wireless device will display "Connected", otherwise it would stay blank The current encryption setting of the wireless network device Show the degree of the Wi-Fi signal 6. System Network Information 1 No Item 1 Network Function Descriptions The network setting of this VZ4W device. When the DHCP function is closed, click edit to enter edit mode and change the network setting. 7. Maintenance 1 2 3 4 5 No Item Function Descriptions Reset to the default Select the reset button to resume the factory default 1 value setting as the web page setting 2 Reboot Click the reboot button and reboot the device Current Firmware 3 version Display current firmware version 4 Upgrade file path Choose firmware *.bin file 5 Start Update Click and start update the firmware 8. User Account No Item 1 Device Name 2 User Name 3 Password 4 Save 5 Cancel Function Descriptions Allow modify the Device Name Allow modify the user login account (default: admin) Allow modify the login password (default: 9999) Save and change the wireless network settings Cancel without saving Launch VisualCam software and select the connection mode to "WiFi STA (Client Mode) Connection". Device name will show in the device list. 9. About 1 No Item 1 Related Information Function Descriptions Display information about the manufacturing of this devicemacOS Version 13.5.2 (Build 22G91) Quartz PDFContext Word