Buy LED Bulbs | LED Globe Lights | LiquidLEDs™
User Guide for LiquidLEDs models including: Festoon String Light, Festoon, String LightLight
20m White Festoon String Light 20 Bulb 240V | LiquidLEDs Lighting
File Info : application/pdf, 4 Pages, 152.07KB
DocumentDocumentString Lights User Manual www.liquidleds.com.au help@liquidleds.com.au 02 8880 9033 SAFETY INFORMATION Ensure to read all instructions and warnings in this user guide before first use. Retain this user guide for future reference. IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed, including the following: ! · Do not mount or place near gas or electric heaters, fireplace, candles, or other similar heat sources. · Do not secure the product's wiring with staples or nails or place it on sharp hooks or nails. · Do not let lamps rest on the supply cord or on any wires. · Do not hang objects from the cord, wire, or light string. · Do not use this product for other than its intended use. · Do not close doors or windows on the product or extension cords as this may damage the wire insulation. · Do not cover the product with cloth, paper or any material not part of the product when in use. · Read and follow all instructions on the product or provided with the product. · Ensure the power cord is unplugged before installing, connecting, or when replacing the light bulbs. · Do not replace the light bulbs during rain or when the string light is wet. ! AUTION: RISK OF ELECTRIC SHOCK Do not use extension cord near water or where water may accumulate. Keep lamps at least 16 feet (4.88m) from pools and spas. Keep plugs and receptacles dry. Do not submerse. ! WARNING: RISK OF ELECTRIC SHOCK Disconnect power at the source prior to wiring, re-lamping or servicing in any way. The light string kits are supplied with an two prong plug that will only fit into a Australian outlet. Do not alter the plug. www.liquidleds.com.au help@liquidleds.com.au 02 8880 9033 2 Connecting Multiple Sets: Add the wattage of each light bulb together for a total of 2000 Watts or less. When multiple connecting sets protect connection(s) from direct exposure to rain and water. Do not allow connection(s) to become wet. Connecting String Lights String Light Additional String Light Tightly cap female end if not connecting multiple string lights, or last set of connected string lights. Connect to String Light (if connecting two or more) IP 65 240V IP IP 65 65 www.liquidleds.com.au help@liquidleds.com.au 02 8880 9033 3 3 Installation Installation Methods 1 Using a guide wire with S-hooks or cable ties Attach guide wire to structural support Guide Wire (Not included) S-Hooks or cable ties ( included ) Attach guide wire to structural support 2 Attached to a structure Structural Support Attach to structural support Minimum every 6meters Structural Support Attach to structural support Minimum every 6meters Structural Support Screw Hook Screw Hook Screw Hook Troubleshooting PROBLEM The lights will not turn on. The fuse blows, or the circuit breaker trips, when the light is turned on. POSSIBLE CAUSES The bulb is burned out. The power is off. There is a faulty switch. There is a faulty wire connection. The bulb is not making contact with the terminal. There are crossed wires, or the power wire is grounding out. The receptacle circuit is overloaded. SOLUTION Replace the light bulb. Ensure the power supply is turned on. Test or replace the switch. Check the wiring. Check position of terminal inside socket. Discontinue use of the light string. Contact a qualified electrician Connect to a different receptacle circuit. NOTE: If certain bulbs will not light, unplug the string light from the outlet and check the contact inside the socket (brass contact at the center of the socket). It may be necessary to raise the contact point somewhat to ensure eliable contact with the base of the bulb. Ensuring power is off, bend the contact upwards with a small flat-head screwdriver (no more than 25-30 degrees). Maintenance Periodically clean the string light, check connections and ensure no additional weight has been added. www.liquidleds.com.au help@liquidleds.com.au 02 8880 9033 4 3