Product Overview
The Bora Webbing Lock™ is a custom injection-molded accessory designed to keep 1" belt webbing securely in place. It is engineered to integrate specifically with the male end of the Cobra® buckle. This compact and durable component ensures your belt setup remains dialed in during wear. While providing a firm hold, the Bora Webbing Lock™ is also designed for intentional adjustment, allowing for quick disengagement. It prevents slippage and maintains a streamlined, secure belt setup, whether on the move or holding a position. The Bora Webbing Lock™ is compatible with all former Ferro Concepts Battle Belts that feature AustriAlpin FX 25 Pro Style Buckles.
Description of Image: A close-up view of a tan Cobra-style buckle with camouflage webbing attached, showing markings like "AUSTRIALPIN", "DR COBRA", "25 PRO STYLE MV", "FX COBRA", "PAT. PEND.", "22 kN", "15 kN", "ANSI Z350.12-2019". Text below reads "Bora Webbing Lock™ installed on The Bora Belt™".
Description of Image: Hands are shown attaching a tan accessory (the Bora Webbing Lock™) to the male end of a Cobra-style buckle on a camouflage belt.
Features:
- Lightweight, low-profile design.
- Compatible with The Bora Belt™ and all former Ferro Concepts Battle Belts.
- Designed for 1" webbing.
- Interfaces directly with the male end of the Cobra® buckle.
- Precision-molded for a seamless fit.
- Allows for quick, intentional adjustment when needed.
- Made in the USA.
- Maintains tight, slip-free webbing control.
Components:
Description of Image: Front view of the Bora Webbing Lock™ accessory, showing its slots. Labeled "Bora Webbing Lock™ (Front)".
Description of Image: Back view of the Bora Webbing Lock™ accessory. Labeled "Bora Webbing Lock™ (Back)".
Installation on The Bora Belt™
Follow these steps to install the Bora Webbing Lock™ on your belt.
Description of Image: Hands are shown holding a piece of camouflage webbing and the male end of a Cobra-style buckle. The webbing is being detached from the buckle. Text reads: "1. To install the Bora Webbing Lock™, start by removing the Male end of the Cobra® buckle from the 1" webbing."
Remove Male Buckle End:
Start by removing the male end of the Cobra® buckle from the 1" webbing.
Description of Image: Hands are shown holding the male end of a Cobra-style buckle and the Bora Webbing Lock™ accessory. The webbing is being threaded through a slot on the Bora Webbing Lock™. Text reads: "2. Once the Male end of the Cobra® buckle has been removed, pass the 1" webbing through the slot on the Bora Webbing Lock™."
Thread Webbing Through Lock:
Once the male end of the Cobra® buckle has been removed, pass the 1" webbing through the slot on the Bora Webbing Lock™.
Description of Image: Hands are shown threading the 1" webbing up through the innermost slot of the male Cobra® buckle. Text reads: "3. Reinstall the Male end of the Cobra® buckle by passing the 1" webbing up through the innermost slot on the Male Cobra® buckle."
Reinstall Male Buckle (Innermost Slot):
Reinstall the male end of the Cobra® buckle by passing the 1" webbing up through the innermost slot on the male Cobra® buckle.
Description of Image: Hands are shown threading the 1" webbing down through the outermost slot of the male Cobra® buckle. Text reads: "4. Pass the 1" webbing down through the outermost slot on the Male Cobra® buckle."
Thread Webbing Through Buckle (Outermost Slot):
Pass the 1" webbing down through the outermost slot on the male Cobra® buckle.
Description of Image: Hands are shown adjusting the tension of the 1" webbing. Text reads: "5. Tighten or loosen 1" webbing to desired length. *Note - The Bora Webbing Lock™ allows you to tighten the webbing once installed."
Adjust Webbing Length:
Tighten or loosen the 1" webbing to the desired length. Note: The Bora Webbing Lock™ allows for tightening of the webbing after installation.
Description of Image: Hands are shown pressing the Bora Webbing Lock™ into the back of the male Cobra® buckle. Text reads: "6. Once the webbing is adjusted to desired length, press the Bora Webbing Lock™ into the back of the Male Cobra® buckle."
Engage Bora Webbing Lock™:
Once the webbing is adjusted to the desired length, press the Bora Webbing Lock™ into the back of the male Cobra® buckle.
Description of Image: Hands are shown ensuring the Bora Webbing Lock™ is fully seated and the webbing is threaded correctly. Text reads: "7. Make sure that the Bora Webbing Lock™ is fully seated into the back of the Male end of the Cobra® buckle and the 1" webbing is properly threaded through the buckle. The Bora Webbing Lock™ allows for tightening of the 1" webbing while the lock is engaged. If you need to loosen the 1" webbing press the lock down and out of the Male end of the Cobra® buckle to disengage."
Final Check and Adjustment:
Ensure the Bora Webbing Lock™ is fully seated into the back of the male end of the Cobra® buckle and the 1" webbing is properly threaded. The Bora Webbing Lock™ allows for tightening of the 1" webbing while engaged. To loosen, press the lock down and out of the male end of the Cobra® buckle to disengage.
Description of Image: A person wearing a tactical vest and belt setup, showcasing the Bora Webbing Lock™ installed on their belt.
Models: Bora Webbing Lock, Bora Webbing Lock, Webbing Lock, Lock
