Serfas E-LUME User Manual

User Manual

Thank you for choosing a Serfas E-LUME series light! We know you will be happy with the performance and value you are getting in this product. This manual is intended to help get you started on your journey down that well lit path. Please read this manual completely and use the recommended care precautions before using this product. If you have any further questions regarding this product please go to our website at www.serfas.com or call us at 1-623-888-5841.

Specifications

Contents Included

How to Mount the Headlight

Universal Bracket Instructions

Open bracket by pulling the thumb lever down, then un-clip the thumb lever from the cam hook to open. Adjust the rubber strap length to fit the handlebar or seat post by moving the strap up or down the rungs located under the swivel light mount. Once the length of strap is adjusted for best fit, install around the handlebar or seat post by inserting the thumb lever into the cam hook, then rotate the thumb lever upwards towards the swivel mount to lock. If the light still moves on the bar, open the thumb lever and shorten the strap by moving the rubber strap up to the next rung.

Key components of the bracket system:

Light Operation

Your new light has two different modes: solid beam and flashing.

To switch modes: Hold the power button for 2 seconds to switch between normal (solid) and flashing modes.

To turn off: Hold the power button for 1 second.

To turn on: Press and hold the on/off button for approximately 1 second.

To return to solid mode from flashing: Hold the power button for 1 second.

Visual representation of modes:

Over Heat Protection

The overheat protection circuitry in your light ensures that it operates at safe temperatures to ensure a long life. Continued heat build-up is the biggest enemy of LEDs and causes lower lumen output and lifespan when operated too hot. Under proper operating conditions, your LED should last 50,000+ hours.

If the light gets too hot (due to inadequate airflow, mud, dirt, or steep inclines), the circuitry will automatically go into "Medium" mode. Once the airflow over the light has improved and the running temperature is reduced, the circuitry will switch the light back into the previous mode.

How to Charge Battery

Warning: Batteries can only be charged using a USB adapter with a 5V output or a USB port on a computer. Only charge batteries in a dry environment.

The light has smart charging technology which ensures longer battery life and will not overcharge.

Charge times depend on the light model being charged due to internal components inside the light.

Battery Indicators:

Charging Steps:

  1. Carefully open the rubber dust cover on the bottom side of the light, exposing the USB port.
  2. Insert the micro USB cord into the light's USB port.
  3. The charge indicator will start flashing red within seconds.

The light will automatically stop charging when a full charge is achieved, and the indicator light will turn solid blue. Remove the battery from the charger and reinsert the rubber pull tab into the USB port to keep out water and dirt.

You can expect 300-500 charging cycles from this rechargeable battery.

Runtimes are affected by ambient temperature (above 110°F or below 35°F). We suggest running in the medium or low power modes to extend run time.

Always store the battery with a full charge. If being stored for more than a month, recharge monthly.

Lock Mode

The light is set to lock mode at the factory.

To lock or unlock the light: Press and hold the power button for about 5 seconds when the light is off.

Warranty

Go to www.serfas.com/warranty for warranty details and online registration. Limited Lifetime Warranty covers manufacturing defects.

Serfas warrants to the original purchaser of this product that the product is free from defects in material and workmanship for the lifetime of the product with online registration. This warranty does not apply to damage due to heat, physical damage (crashing) resulting from abuse, neglect, improper repair, improper fit, or alterations of the fixture.

Battery Warranty: Batteries are covered by a one-year warranty from the date of purchase.

To make a claim, please email warranty@serfas.com. If email is unavailable, please call Serfas at 623.888.5841.

Battery Replacement

At the end of its lifespan, your light allows the end user to replace the battery. Over time, after many charge cycles, the battery may lose capacity or stop working altogether due to low voltage. When this happens, a replacement battery is available for purchase from Serfas or your local retailer.

How to Clean and Care for the Light

CAUTION: Please follow the guidelines below:

Contact Information

SERFAS, INC.

2333 W. Utopia Rd.

Phoenix, AZ 85027

Website: www.serfas.com

Social Media: [Facebook] [Twitter] [YouTube]

Models: USM-1000, E-Lume 1000 Headlight

PDF preview unavailable. Download the PDF instead.

USM Updated-Manual FNL Adobe PDF library 15.00 Adobe Illustrator(R) 24.0

Related Documents

Preview Serfas E-LUME Tail Light User Manual & Guide
Comprehensive user manual for the Serfas E-LUME series bicycle tail light, covering specifications, operation, charging, mounting, warranty, and care instructions.
Preview Serfas Dash 500W E-Bike Owner's Manual
Comprehensive owner's manual for the Serfas Dash 500W E-Bike, covering safety, operation, maintenance, and warranty information.
Preview Serfas SL-150 Starter Headlight: Runtimes, Features, and Care
Detailed specifications and operating instructions for the Serfas SL-150 Starter Headlight, including runtime modes, charging guidance, warranty information, and safety warnings.
Preview Serfas USL-TL60 USB Headlight Charging Indicators and Time
Information on charging indicators (solid and blinking) and charge time for the Serfas USL-TL60 USB headlight. Learn how to tell when your headlight is fully charged or needs charging, and the estimated charge time.