Instructions for GME models including: 16.11.2024, 54110-1, PL259 Plug Fitting, PL259, Plug Fitting, Fitting

Plug Fitting Instructions

16.11.2024 — Cut away black outer layer of cable. Cut a small black section (approx. 2 mm) off the end and put aside for later. (step 5). 4. Cut away white section, ...

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 1 Pages, 468.90KB

Plug Fitting Instructions
PL259
1. Remove collar from plug and slide over cable (ensure correct position).
2. Cut away black outer layer of cable. Cut a small black section (approx. 2 mm) off the end and put aside for later (step 5).
2 cm
3. Peel back braid.
4. Cut away white section, leaving approx. 3 mm.
3 mm
5. Fit small black section (step 2) over the white. 6. Screw plug over exposed cable.
7. Trim off excess braid. Trim off excess and solder-exposed wire to pin.
8. Bring back collar and screw over plug.
gme.net.au
GME Pty Ltd Part Number: 310069 Drawing Number: 54110-1



References

• Home - GME