Product Overview
Product Name: GTX1
Description: 3" High Compression Super Bullet Tweeter with 1" Titanium Voice Coil (VC) and Neodymium Magnet.
Spanish Description: Super Tweeter Bala de Alta Compresion de 3" con Magneto de Neodimio y Bobina de Voz de Titanio de 1".
Slogan: WE LIKE IT LOUD
For more information, please visit DS18.COM.
Designed & Engineered in USA.
Specifications
| Specification | English | Spanish |
|---|---|---|
| Nominal Diameter | 3" | Diámetro Nominal |
| Nominal Impedance | 4 ohm | Impedancia Nominal |
| AES Power Handling | 60W | Manejo de Potencia AES |
| Program Power Handling | 120W | Manejo de Potencia Program |
| Peak Power Handling | 240W | Manejo de Potencia Peak |
| Sensitivity (1w/1m) | 98dB | Sensibilidad (1w/1m) |
| Frequency Response | 3K - 20KHz | Respuesta de Frecuencia |
| Recommended Hi Pass Crossover | 3KHz | Crossover de Paso Alto Recomendado |
Motor / Components
| Component | English | Spanish |
|---|---|---|
| Voice Coil Diameter | 1" / 25.4mm | Diámetro de la Bobina de Voz |
| VC Former Material | Kapton | Material Interior de Bobina Móvil |
| Winding Material | KSV | Material de Bobinado |
| Diaphragm Material | Titanium | Material del Diafragma |
| Magnet Material | Neodymium | Material del Imán |
| Body Material | Aluminum | Material de la Carcasa |
Measurements
| Measurement | English | Spanish |
|---|---|---|
| Overall Diameter | 2.95" / 75 mm | Diámetro Total |
| Overall Depth | 1.96" / 49.9 mm | Profundidad Total |
| Front Mount Baffle Cutout | 2.26" / 57.3 mm | Corte del orificio de montaje |
| Mounting Depth | 1.46" / 37 mm | Profundidad de Montaje |
Diagram Descriptions
Dimensional Diagram: The tweeter features a circular design. Key dimensions provided include:
- Overall Diameter: 2.95 inches (75 mm)
- Overall Depth: 1.96 inches (49.9 mm)
- Front Mount Baffle Cutout Diameter: 2.26 inches (57.3 mm)
- Mounting Depth: 1.46 inches (37 mm)
- A smaller detail indicates a measurement of 0.18 inches (4.50 mm), likely related to a component or mounting feature.
- Another measurement shows 2.64 inches (67 mm), possibly representing a mounting hole circle or a specific component diameter.
SPL vs Frequency Graph: This graph illustrates the Sound Pressure Level (SPL) in decibels (dB) plotted against frequency in Hertz (Hz). The data shows that the tweeter's sensitivity increases with frequency, reaching its peak output in the higher frequency range, approximately between 5kHz and 10kHz, before gradually decreasing. The sensitivity starts around 60 dB at 20 Hz and peaks near 115 dB in the optimal frequency range.
Official DS18 Pro Audio Store - Speakers, Subwoofers, Amps & More!
