Genesis GV60 / 2023+ Emergency Response Quick Reference Guide

Vehicle Identification/Recognition

Charge Door: Located on the passenger side rear of the vehicle.

GV60 Exterior Views: Images show the front and rear of the GV60, highlighting its design.

Accessing Vehicle

The diagram illustrates the internal components of the GV60 related to safety and power systems.

Key Components:

• Supplemental Restraint System Control Module (SRSCM)
• High voltage cable
• High voltage disconnect
• High voltage battery
• Motor Drive Unit
• Airbag
• Airbag Gas Inflators
• 12V Battery
• OBC (On - Board Charger)
• Air-conditioning line
• Ultra-High Strength Steel
• Air-conditioning component
• Seat belt pretensioner

This information is applicable to GV60 vehicles first sold in the United States.

Disabling Vehicle

Two methods are provided for disabling the vehicle to prevent accidental restart. Both methods require a minimum distance of 5 meters (16.4 ft) from the vehicle.

Method 1:

1. Access the front trunk.
2. Remove clip (A).
3. Remove cover.
4. Disconnect 12V battery.
5. Wait 5 minutes.

Method 2:

1. Open the hood.
2. Remove cover (A).
3. Disconnect High Voltage System by removing the fuse with the yellow tab.
4. Wait 5 minutes.

Vehicle Towing Information

Tow the vehicle using a flatbed or wheel dollies. Never tow the vehicle with the front or rear wheels on the ground.

The diagram shows various towing configurations, all indicating the vehicle should be lifted off the ground.

For further information, please refer to the Emergency Response Guide (ERG).

This document is applicable to GV60 vehicles first sold in the United States.