User Guide for Optoma models including: 5862RK, 5752RK, 5652RK, 5862RK Interactive Flat Panel Display, Interactive Flat Panel Display, Flat Panel Display
il y a 18 heures — RS232. VGA IN. Computer. VGA Cable. VGA IN. HDMI signal output. HDMI cable. OUT. Projector. Computer. USB-C. USB-C Cable. USB TYPE C. Computer.
This Quick Start Guide will help you safely set up and operate the Interactive Flat Panel. If you have any questions, please refer to the User Manual.
File Info : application/pdf, 1 Pages, 18.86MB
DocumentDocumentInteractive Flat Panel Quick Start Guide 2/10 Thank you for purchasing this Optoma product This Quick Start Guide will help you safely set up and operate the Interactive Flat Panel. If you have any questions, please refer to the User Manual. Powering on / off the device Plug the power cable into the power socket of the device Plug the power cable into the wall outlet. Turn the power switch to the ON (I) position. Remove the cover on the rear of the remote control and insert two AAA batteries. Press the POWER button on the remote control. The indicator on the front of the panel will then turn white and the device will power on. Press the power button on the remote control or press the power button on the front of the display for three seconds and wait for the display to shut down. Only after the indicator light turns red should you turn off the power switch. Front panel functionality For detailed instructions, please scan the QR code or visit the URL: https://www.optoma.com/support/download *The product images shown are for illustrative purposes only and may not be an exact representation of the product. Optoma reserves the right to change product images and specifications at any time without notice. USB 1. Short press this button to put the device into standby mode 2. Press this button for three seconds to turn on/off the panel USB interface of Android & PC systems Quick setup for touch control PC AUDIO IN VGA IN TOUCH HDMI USB TYPE C 3/10 Connect a VGA*, HDMI, or USB-C cable between your external computer and the interactive flat panel to enable the image feed. Connect a USB cable between your device and the associated Touch port on your panel to enable touch control. If using a VGA cable, please connect an audio cable (3.5mm) between your device and the audio-in on your panel to enable sound. Please review the USB Touch ports section in the user manual for details on correct touch port associations. Input devices shown below are examples only AUDIO OUT Audio cable Amplifier/Acoustics/Earphone HDMI signal input HDMI cable HDMI signal output OUT HDMI cable RS232 Connection RS232 Serial Port Cable VGA IN VGA IN VGA Cable USB-C USB TYPE C USB-C Cable 6/10 7/10 8/10 4/10 5/10 Projector USB USB USB cable USB USB device Network signal input Computer Wi-Fi dongle installation Network cable Router and other network signal output Remove the USB Wi-Fi slot cover and plug the Wi-Fi dongle into the USB port inside. The dongle can receive signal in areas where Wi-Fi networks are available. Computer Computer Pen holder installation Plug the USB cable from the pen holder into the USB port and attach the magnetic pen holder to the side of the interactive flat panel. Put the touch pen into the pen holder Attention! For system security, Optoma interactive flat panel displays run on a customised Android operating system. Additionally, Optoma interactive flat panel displays do not support Google Play Services. Optoma has streamlined the Android operating system so only modules related to display features remain. The customised Android operating system may not be compatible with all third-party Android apps. Third-party Android apps can vary in quality and some even contain malicious codes, which could compromise system security and functionality and may invalidate your product warranty. Optoma makes no representations regarding the quality, security or suitability of any third-party apps and their compatibility with the Optoma interactive flat panel. Optoma shall have no responsibility or liability with respect to any damage, faults, loss in functionality or security issues arising as a direct or indirect result of the installation of third-party apps on the interactive flat panel. Optoma support in rectifying any issue which may result from the installation of third-party apps will be chargeable and may be limited. 9/10 10/10 English Spanish Portuguese French For warranty information in the Europe/ Middle East/Africa region, please visit our website: https://www.optoma.com Para obtener información sobre la garantía en la región Europa, África, y Medio Oriente, visite nuestro sitio web: https://www.optoma.com Para informações sobre a garantia na região Europa, África, e Oriente Médio, por favor visite a nossa página na internet: https://www.optoma.com Pour des informations sur la garantie dans les régions Europe / Moyen-Orient / Afrique, veuillez visiter notre site Web à: https://www.optoma.com For warranty information in the USA region, please visit our website: https://www.optoma.com/us/support/ warranty-and-return-policy/ Para obtener información sobre la garantía en la región EUA, visite nuestro sitio web: https://www.optoma.com/us/support/ warranty-and-return-policy/ Para informações sobre a garantia na região dos Estados Unidos, por favor visite a nossa página na internet: https://www.optoma.com/us/support/ warranty-and-return-policy/ Pour des informations sur la garantie dans la région des États-Unis, veuillez visiter notre site Web à: https://www.optoma.com/us/ support/warranty-and-return-policy/ Address: Optoma Technology, Inc 47697 Westinghouse Drive Fremont, CA 94539 USA Telephone: 510-897-8600 1-888-289-6786 (6am 5pm PST) Dirección: Optoma Technology, Inc 47697 Westinghouse Drive Fremont, CA 94539 USA Teléfono: 510-897-8600 1-888-289-6786 (6am 5pm PST) Endereço : Optoma Technology, Inc 47697 Westinghouse Drive Fremont, CA 94539 USA Telefone : 510-897-8600 1-888-289-6786 (6am 5pm PST) Adresse: Optoma Technology, Inc 47697 Westinghouse Drive Fremont, CA 94539 USA Téléphone: 510-897-8600 1-888-289-6786 (6am 5pm PST)