EGLO FAVAZZINA LED Recessed Lamp

Section A: Power Disconnection

Before commencing installation, it is crucial to disconnect the main power supply. The diagram illustrates a hand operating a switch to the 'OFF' position, indicated by an arrow.

Section B: Lamp Cover Attachment

This section demonstrates how to attach the lamp's cover or diffuser. The cover has a diameter of approximately Ø65-70mm. An exploded view shows the cover being fitted onto the main lamp body with a rotational motion.

Section C: Electrical Wiring

Connect the lamp's wiring to the mains supply using the provided junction box. The detailed view of the junction box shows terminals clearly marked 'L' for Live and 'N' for Neutral. Proper connection is essential.

Connection Steps:

1. Insert the power supply wires into the appropriate terminals within the junction box.
2. Connect the lamp's integrated cable to the junction box.
3. Attach the lamp fixture to the ceiling.

Section D: Installation Clearance and Safety Warnings

Adequate space and safety precautions are required for installation:

• Maintain a minimum clearance of >75 mm from surrounding materials.
• The required recess depth for the fixture is 190 mm.
• The fixture is designed for ceilings with a thickness ranging from 5-20 mm.

Warning: Do not install the lamp fixture in direct contact with or too close to insulation materials. A diagram explicitly shows this scenario with a prohibition symbol (a large 'X' over the fixture within insulation).

Temperature Handling: Handle the lamp with care. Avoid exposure to extreme temperatures. Diagrams illustrate handling precautions, with one showing a lamp and heat waves crossed out, and another showing a lamp and a hand with a checkmark, signifying correct handling.

Section E: Power Activation and Product Information

Once installation is complete and all connections are secure, the power supply can be switched back ON. The diagram shows a hand operating a switch to the 'ON' position, indicated by an arrow.

Product Identification:

• Article Numbers: 901755, 901756, 901757
• Manufacturer Website: www.eglo.com

Product Features: This fixture is an LED product, indicated by the 'LED' symbol. It may require tools for installation or adjustment, as suggested by the screwdriver and gear icon.

Compatibility Warning: Do not use this fixture with heat-emitting sources or certain dimmers. A symbol depicts a light bulb emitting wavy heat lines, crossed out.

Installation Dimensions:

• Standard recessed depth: 60 mm.
• Alternative recessed depth: 65 mm.

A prominent checkmark symbol confirms correct installation procedures have been followed.