ASD LED Seamless Vapor Proof Fixture

Product Features and Design

The ASD LED Seamless Vapor Proof Fixture is designed with a waterproof polycarbonate body and a frosted lens, offering impact resistance. It allows for the connection of multiple fixtures together and includes a 4ft cord for easier installation. The fixture operates on 120-277V circuits and features a 0-10V dimmable driver.

• Battery Back-up: Built-in battery provides 90 minutes of power during emergencies.
• Color and Power Selectable: Choose between 3,500K neutral white, 4,000K cool white, or 5,000K daylight color temperatures. Power can also be adjusted with a simple switch.
• Surge Protection: 6kV surge protection safeguards the fixture from voltage spikes and current surges.
• Application: Ideal for commercial and industrial settings such as parking garages, carports, stairwells, tunnels, and car washes. It is also rated for Wet Locations.
• Advantages: Features a calculated lifespan of up to 80,000 hours, ensuring longevity. ASD offers a 5-year limited warranty and holds UL and DLC Standard certifications for quality and safety.

Product Presentation

For detailed luminous flux information, please refer to Annex 1, page 2.

Ordering Information

For the most up-to-date spec sheets, please refer to asd-lighting.com.

Product Specifications

Construction & Materials: Housing: PC, Lens: PC, Finish: White

Electrical System: Input voltage: 120-277 V

Environmental System: Work environment: Suitable for Damp Locations, IP66. Operating temperature: -40°F to 122°F (-20°C to 50°C). L-70 Life: R >54,000 hrs; C > 80,000 hrs.

Optical System: Color temperature: 3CCT switch (3,500/4,000/5,000 K), 5,000 K by default. CRI: > 80. Power consumption: Varies by model (see table). Dimming compatible controls: Lutron, Eaton, Legrand, Leviton. Power factor: > 0.9.

Annex 1: Luminous Flux Details

Package Contents

• LED Seamless Vapor Proof Fixture: 1
• Mounting bracket (A): 2
• Mounting screws (B): 4
• Plastic anchor (C): 4
• Flat washer (D): 4
• Box: 1

Built-in Battery Back-up Information

Test button operation: Press test button to change from charging mode to emergency mode. Release test button to go back to the normal mode.

Back-up mode operation: When green light is on, backup battery is charging in AC mode. When it detects AC power outage, fixture will switch to back-up mode and indicator light will turn off.

Specifications: Input voltage: 100-277 V 50/60 Hz. Warranty: 5 years. Indicator light: Illuminated test switch, indicator light. Battery: Li-ion. Battery charging current: 250 mA. Charging time: > 24 hours.

Built-in Motion Sensor Information

REMOTE CONTROL ASD-06RC sold separately.

Remote Control Functions:

• ON/OFF: Turn the sensor ON/OFF.
• Auto Reset: Enter "sensor mode" and perform previous settings.
• Auto Reset: Enter "sensor mode" and perform the default settings.
• Send: Shows current settings.
• Scenes: Saved in remote.
• Memory: Saves the scene settings.
• Apply: Applies current scene settings to the fixture.
• Test: Press this to begin scene setup.

Sensor Parameters:

• Detection range: Adjust detection area/sensitivity levels according to real installation situations, higher or lower.
• Daylight sensor: Memorize and send out the previous setting of individual parameters. Also known as "sensitivity", 100% means the highest sensitivity and longest distance. Use this button and the +/- buttons to adjust.
• Stand-by dimming: The preset lux level at which motion will be detected. Use this button and the +/- buttons to adjust.
• Hold time: After hold time, the light will dim from 100% to optional standby dimming levels. Use this button and the +/- buttons to adjust.
• Stand-by period: The period that light will stay illuminated 100% after no motion is detected. Use this button and the +/- buttons to adjust.
• Stand-by period: The period after holdtime, during which the light keeps standby dimming level.

Function Buttons:

• CCT: The main functional buttons to adjust the factors to desired level.
• POWER: Adjust brightness in both ON/OFF mode & sensor mode, minimum 10%, max 100%, each time this button is pressed it changes by 5%.
• Test button: Press this button to test the sensor; it will temporarily change the hold time to 2s. This setting cannot be saved.
• Daylight harvesting: Daylight harvesting function enabled or disabled.

Detection Range Diagram:

Shows a diagram illustrating detected areas for ceiling and wall mounting, with maximum detection distance of 13.1 ft (4 m) at 100% sensitivity.

Specifications: Detection area: 25%/50%/75%/100%. Hold time: 5s/30s/1min/2min/3min/5min/10min/15min/20min/25min/30min/45min/60min/90min/120min. Daylight threshold: 2 lux (0.2 fc) to 400 lux (37.2 fc)/disable. Standby period: 0s/5s/30s/1min/2min/3min/5min/10min/15min/20min/25min/30min/45min/60min/+∞. Standby dimming level: 10%/20%/30%/50%. Operating voltage: 10-15 V. Operating current: ≥ 40 mA. Mounting height: max 13.1 ft (4 m). Detection range: > 65 ft (20 m). Operating frequency: 5.8 GHz ± 75 MHz. Transmitting power: < 0.3 mW.

Functional Modes

With Dusk/Dawn Function:

1. With insufficient ambient brightness, sensor turns on light and keeps it at standby dimming level even if there is no motion or presence.
2. When sensor detects motion or presence, it will bring the light level up to 100%.
3. After motion is no longer detected, the fixture remains at 100% for the hold time.
4. After the pre-set hold time period, it will dim to the standby dimming level again and always keep it.
5. With sufficient ambient brightness, the sensor will turn OFF light automatically.

With Daylight Threshold:

1. With sufficient daylight, the light remains OFF even after motion is detected.
2. With insufficient daylight, the sensor turns light ON when motion is detected.
3. After no motion is detected, the sensor keeps the light ON at 100% for the hold time.
4. After hold time, the sensor dims the light to the standby dimming level for the standby period. If the standby period is set to 0s, the sensor turns the light OFF automatically after the hold time.
5. The sensor turns OFF light automatically after the standby period when there is no motion detected.

With Daylight Disabled:

1. Sensor turns ON light when motion is detected.
2. Light stays on after detecting motion for the desired hold time.
3. Sensor dims light to standby dimming level after hold time if there is still no motion.
4. Sensor turns OFF light after the standby period.

Daylight Harvesting:

1. When ambient brightness is lower than the preset lux level, the sensor will turn on the light automatically and keep dimming according to the change of the ambient brightness. As it gets darker outside, the fixtures will brighten, and as it gets brighter outside, the fixtures will dim down.
2. When the ambient brightness exceeds the preset lux level, the light will turn OFF.

Daylight Harvesting Setting:

1. Adjust "daylight" value higher than 50lux.
2. Preset "standby period" 0s.
3. Press the "daylight harvesting" button on the remote control to activate.

Installation Guide

Important Safety Information:

• Please read all the instructions below before installation!
• Make sure that the supply voltage corresponds to the rated product voltage.
• The product must be installed by a qualified electrician in accordance with the National Electrical Code and corresponding local codes.
• If the product is damaged, do not use it.
• All wiring connections should be capped with UL approved wire connectors.
• For surface mount, there are two stainless steel brackets included.
• This fixture is intended to be connected to a properly installed and grounded UL listed junction box with suitable strain relief means for the power cord. The junction box is not included and should be purchased separately.

Electrical Schematic Diagram:

Diagrams show wiring for LVP2SM, LVP2SM-EM with battery back-up, and LVP2SM multiple fixture connections, illustrating power, driver, and emergency connections.

Installation Steps:

1. Remove the four screws off of the end-cap. Pull out the end-cap along with the junction box. Remove the cover of the junction box. The battery back-up will be unplugged when received; plug in the battery back-up and the fixture using the connector.
2. Insert the power cord into the junction box through the IP65 plug*. Connect the wires: Black to Black, White to White, Green to Green. Choose the power output and color temperature needed using the switch. Close the cover of the junction box, insert it back into the fixture, and tighten the screws of the end-cap.
3. Secure the fixtures to the ceiling/wall with mounting brackets.

Connecting Multiple Fixtures:

1. Remove the four screws off of the end-cap, pull out the end-cap along with the junction box, remove the cover of the junction box, and remove the small cut-hole in the gasket.
2. Insert the power cord from the other fixture into the junction box. Connect the wires: Black to Black, White to White, Green to Green. Choose the power output and color temperature using the switch. Close the cover of the junction box, insert it back into the fixture, and tighten the screws of the end-cap.
3. Secure the fixtures to the ceiling/wall with mounting brackets.

* Note: plug suitable for up to 1/2" wires.

Power and Color Temperature Settings: Open the end-cap on the gasket side, pull out and open the junction box, and use the switch to adjust power output and color temperature. Then, close the junction box, slide it back into the fixture, and tighten the screws on the end-cap.

Note on Multiple Fixtures: Multiple fixtures with different sizes and wattages can be linked together; the total wattage must not exceed 500W (120V) / 1200W (277V).