Smartwares CL-1459 Alarm Clock

Safety

By ignoring the safety instructions the manufacturer cannot be held responsible for the damage.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Never move the appliance by pulling the cord and make sure the cord cannot become entangled.
The appliance must be placed on a stable, level surface.
To protect yourself against an electric shock, do not immerse the cord, plug or appliance in the water or any other liquid.
⚠️ Within an equilateral triangle, is used to indicate that a specific component shall be replaced only by the component specified in that documentation for safety reason.
⚡ LIGHTNING FLASH WITH ARROWHEAD SYMBOL - within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This product complies with conformity requirements of the applicable European regulations or directives.
The universal recycling symbol ♻️, logo, or icon is an internationally recognized symbol used to designate recyclable materials. The recycling symbol is in the public domain and is not a trademark.
The product and packaging materials are recyclable, subject to extended manufacturer responsibility. Dispose it separately, following the illustrated packaging symbols, for better waste treatment. The [Triman logo] is valid in France only.
The [Green Dot logo] is the registered trademark of Der Grüne Punkt – Duales System Deutschland GmbH and is protected as a trademark worldwide. The logo may only be used by customers of DSD GmbH holding a valid trademark usage contract or by engaged waste management companies within the Federal Republic of Germany. This also applies to reproduction of the logo by third parties in a dictionary, an encyclopaedia or an electronic database containing a reference manual.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local Authority or local store for recycling advice.

Parts Description

1. On / Off Button
2. Memory Button
3. Preset Button
4. Time Set / Sleep Set Button
5. Alarm 1 / Volume - Button
6. Alarm 2 / Volume + Button
7. Tune - / Hour Button
8. Tune + / Minute button
9. Snooze Button

Before First Use

This unit is equipped with a battery backup system, which requires a battery (not included). Place the battery in the battery compartment and make sure that the + and – battery terminals correspond with the symbols in the battery compartment. If an AC power failure occurs, the clock will automatically switch to the battery power and the internal clock memory will continue running (note that the display is switched off and the radio won't operate). When the AC power resumes, the unit automatically switches back to the AC power and will return to normal operation.

Use

Setting the Time

In standby mode, press and hold the Time Set / Sleep Set button and the display will start blinking. Press the Tune - / Hour button to set the hour and the Tune + / Minute button to set the minute.

Setting the Alarm

In standby mode, press the Alarm 1 / Volume - button to turn Alarm 1 on or off. This is indicated by the indicator light next to the Alarm 1 in the display.

Long press Alarm 1 / Volume - button to set alarm 1's time. When the time display is blinking after the long press, press the Tune - / Hour button to set the hour and the Tune + / Minute button to set the minute.

After setting the time, press again the Alarm 1 / Volume - button and the radio frequency is shown. Use the Tune - / Hour button and the Tune + / Minute to choose to wake up from Radio (displayed as frequency) or Buzzer (displayed as BU).

Press the Alarm 1 / Volume - button again to exit the alarm setting mode. These steps are the same for Alarm 2 (use the Alarm 2 / Volume + button).

When you are awakened by buzzer but wish to sleep a few minutes more, simply touch the “snooze” button and it will shut off the buzzer for 10 minutes before the music or buzzer sounds again. This can be repeated.

Listening to the Radio

Turn on the radio with the On/Off button.

Use the Tune - / Hour button and the Tune + / Minute button to adjust the radio frequency.

Use the Alarm 1 / Volume - button and the Alarm 2 / Volume + button to adjust the volume.

To enter preset stations into the memory press the Memory button. P01 will blink, press the Memory button again to set the current frequency as P01. Repeat these steps to set the other stations on P01 to P10.

To listen to the preset stations, press the Preset button. Press it once to listen to P01, press it twice to listen to P02, etc.

Sleep Function

Press the Time Set / Sleep Set button to choose the sleep time from 90 to 10 minutes (10 minutes interval). The device will turn off after the displayed time from 90 to 10 minutes. To turn this function off press the TIME SET/SLEEP SET button until the display shows “OFF”.

Cleaning and Maintenance

Clean the appliance with a damp cloth. Never use harsh and abrasive cleaners, scouring pad or steel wool, which damages the device.
Never immerse the electrical device in water or any other liquid. The device is not dishwasher proof.

Environment

This appliance should not be put into the domestic garbage at the end of its durability, but must be offered at a central point for the recycling of electric and electronic domestic appliances. This symbol ♻️ on the appliance, instruction manual and packaging puts your attention to this important issue. The materials used in this appliance can be recycled. By recycling of used domestic appliances you contribute an important push to the protection of our environment. Ask your local authorities for information regarding the point of recollection.

Support

You can find all available information and spare parts at www.smartwares.eu.