LED Lighting Products + IRiS LED Video | Blizzard LightingSupport
User Guide for blizzard models including: CRMXGOAT LightCaster Flawless Wireless DMX Control, CRMXGOAT LightCaster, LightCaster Flawless Wireless DMX Control, Flawless Wireless DMX Control, Wireless DMX Control, DMX Control
File Info : application/pdf, 4 Pages, 253.60KB
DocumentDocumentBlizzard Lighting, LLC http://www.blizzardpro.com Waukesha, WI USA Copyright (c) 2024 1. GETTING STARTED What's In The Box? · LightCasterTM CRMX GOAT · AC Power Cord · Mounting Hardware · This Lovely User Manual Getting It Out Of The Box Congratulations on choosing the LightCasterTM CRMX GOAT! Before you begin, please take a moment to verify that all components are included and in good condition. If you notice any damage during transit, notify the shipper immediately and keep all packing materials for inspection. If the unit ever needs to be returned, it must be shipped in its original factory packaging. Need Help? We're here for you. If you have questions or run into issues, visit www.blizzardpro.com/support to open a support ticket. We'll be happy to assist! Disclaimer We strive to provide accurate, up-to-date information and reserve the right to update or correct this manual as needed. For the latest version, visit www.blizzardpro.com. 2. INTRODUCTION General Overview The LightCasterTM CRMX GOAT is a high-performance wireless DMX transceiver designed for reliable operation across a wide range of professional lighting environments. Using advanced CRMX® technology, this device ensures seamless DMX and RDM communication over long distances with ultra-low latency and exceptional signal stability. Its compact and durable design, combined with a 1,000-meter range, makes it a dependable choice for both small and large-scale productions. Setting up a CRMX wireless system is simple and provides highly reliable wireless DMX. This unit works as either a receiver or transmitter. Main Features · 2.4GHz CRMX wireless DMX transceiver · Compatible with CRMX and W-DMX protocols · Switchable TX/RX modes with dedicated button · Adaptive frequency hopping (AFHSS) · 1,000-meter range (line of sight) · Supports RDM in RX mode Specifications · Frequency/Protocols: 2.4GHz, CRMX®/DMX/RDM · Transmitter Power/Receiver Sensitivity: 100mW / 98dBm · Latency/Antenna: < 5ms, 2dBi high-performance · Universes: 1 per transmitter (up to 16) · Connections: 5-pin DMX I/O, powerCON® TRUE1-compatible · Size/Weight: 5.7 x 4 x 2.3 in (14.5 x 10 x 5.8 cm), 1.7 lbs (0.7 kg) Author: J. Thomas Date: 12/3/2024 Last Edited: J. Thomas Date: 12/3/2024 LightCasterTM CRMX GOAT - Rev. A Page 2 © 2024 Blizzard Lighting, LLC 3. OPERATION Antenna Status LEDs Mode (Blue = TX, Red = RX) Signal Strength Meter Function (Bah!) Before You Begin 1. Decide whether each unit will act as a Transmitter (TX) or Receiver (RX) by pressing the Mode (TX/RX) button to toggle the mode. 2. For a Transmitter, you will need to connect a DMX controller to the DMX input, and for Receivers connect the unit's DMX output to the receiving fixture's input. 3. Check the LINK Status LED on the Receiver. If it is on, the Receiver is already paired with a Transmitter. Unpair it before pairing with a new Transmitter (see below). Pairing Process 1. Ensure the Receiver is set to RX mode and the Transmitter is set to TX mode. 2. On the Transmitter, press the Function (Bah!) button. 3. The LINK LEDs on the Transmitter and Receiver(s) will flash rapidly during pairing. 4. Once pairing is complete, the LINK status LEDs on all units will remain solidly lit. Unpairing A Single Receiver 1. On the Receiver, press and hold the Function (Bah!) button for 6 seconds. 2. The LINK status LED on the Receiver will turn off, indicating it is disconnected. Unpairing All Receivers 1. On the Transmitter, press and hold the Function (Bah!) button for 6 seconds. 2. The LINK status LEDs on all paired Receivers will turn off to indicate disconnection. Status LED Overview LED Link Data RDM Power Mode TX RX TX RX TX RX TX/RX Off No paired Receivers Not paired No DMX signal No DMX signal No RDM detected No RDM detected Not powered Flashing Pairing/searching Pairing/searching N/A N/A RDM active RDM active N/A Solid Paired with Receivers Paired with Transmitter Transmitting DMX Receiving DMX N/A N/A Powered and operational LightCasterTM CRMX GOAT - Rev. A Page 3 © 2024 Blizzard Lighting, LLC Enjoy your product! Our sincerest thanks for your purchase! --The team @ Blizzard Lighting