iVoler G1 Premium Tempered Glass Screen Protector Installation Guide

Installation Steps

  1. Step 1: Prepare Hinge

    Tape half of the hinge stickers to the bottom of the device.

    [Diagram: Two small rectangular stickers being applied to the bottom edge of a smartphone screen.]

  2. Step 2: Clean Screen

    Clean your device screen with a wet wipe and then a cleaning cloth. Use the dust removal sticker to eliminate any remaining dust.

    [Diagram: A hand cleaning a smartphone screen with a wet wipe, followed by a microfiber cloth, and then a sticky tab being used to lift dust particles.]

  3. Step 3: Create Hinge

    Position the screen protector in the center, then press and attach the hinge stickers to the screen protector to create a "hinge".

    [Diagram: The screen protector is centered on the phone, and the hinge stickers are being pressed onto the protector to form a pivot point.]

  4. Step 4: Apply Protector

    Align the screen protector with the hinge stickers and apply the screen protector, pressing firmly from bottom to top.

    [Diagram: A hand holding the screen protector, aligning it with the phone screen using the hinge stickers, and pressing down from the bottom edge upwards.]

  5. Step 5: Remove Layer

    Remove the protective layer from the adhesive side of the screen protector.

    [Diagram: A hand peeling off a protective film from the sticky side of the glass screen protector.]

  6. Step 6: Remove Bubbles

    If there are small bubbles, gently press them with your finger and guide them towards the nearest edge to remove them.

    [Diagram: A finger gently pushing a small air bubble towards the edge of the screen protector to expel it.]

Video Guide: To resolve issues with bubbles or dust, scan the QR code or visit the website for a video solution.www.ivoler.com/a2[QR Code: Scan for video solution]

Important Warnings

⚠️ Warning:

  1. Do not use an alcoholic wipe to clean eyes and mouth.
  2. Whether broken or intact, be careful when removing the glass from the device and keep it out of reach of children.

Product Information & Contact

Model: G1

Product Name: Tempered film

Brand: ivoler

Manufacturer Name: Shenzhen Yiwole Technology Co.,Ltd.

Manufacturer Address: 5F, Zong He Building, xinweizai village, yongxiang road, bantian street, Longgang district, Shenzhen china 518000

Contact Information: +86-0755-83243144 | support@ivoler.com

European Representative:

C&E Connection E-Commerce (DE) GmbH

Zum Linnegraben 20, 65933, Frankfurt am Main, Germany

euagent@iflytech.com.cn

UK Representative:

CET Product Service Ltd,

Beacon House Stokenchurch Business Park, Ibstone Rd, Stokenchurch High Wycombe HP14 3FE UK

euagent@iflytech.com.cn

[Recycling Symbol] [Waste Bin Symbol]

Made in China

Models: G1 Screen Protectors, G1, Screen Protectors, Protectors

PDF preview unavailable. Download the PDF instead.

032-2 Instructions d utilisation fr Adobe PDF library 17.00 Adobe Illustrator(R) 24.0