TOOL ORGANIZATION WITH 6 DRILL HOLDERS
user manual with assembly instructions
Note: THIS VEHICLE MUST BE ASSEMBLED BY AN ADULT
ASSEMBLY INSTRUCTIONS
STEP 1
1. Place the C panel with the hole side facing down on a flat surface.
Visual Description: The image shows panel C positioned flat with holes facing upwards. Panel A is shown to the left, and panels B1 and B2 are shown to the right, with labels indicating their positions relative to panel C.
STEP 2
1. Position the D1 and D2 panels on the left and right sides of the C panel respectively.
2. Place two B1 panels on the left side of the C panel and two B2 panels on the right side of the panel.
Use bolts to securely connect them.
Visual Description: Panels D1 and D2 are shown attached to the sides of panel C. Panels B1 are attached to the left side of C, and panels B2 are attached to the right side of C. Bolts are indicated for securing these connections.
STEP 3
Attach the A panel to the two B1 panels and D1 panel using bolts.
Visual Description: Panel A is shown being attached to panels B1 and D1 using bolts.
STEP 4
Attach the E panel to the two B2 panels and D2 panel using bolts.
Visual Description: Panel E is shown being attached to panels B2 and D2 using bolts.
STEP 5
Stand the product upright. Fold open tool hole.
Visual Description: The partially assembled organizer is shown standing upright, with a section that folds open for tool access.
STEP 6
To secure the surge protector to the panel.
Visual Description: An illustration shows how to attach a surge protector to the organizer panel.
PARTS LIST
| Item | Description | Quantity |
|---|---|---|
| A | Left bracket plate | 1x |
| B1 | Middle support plate | 4x |
| C | Tray | 1x |
| D1 | Power tool hanger | 2x |
| D2 | Power tool hanger | 2x |
| E | Right bracket plate | 1x |
| F | Surge protector | 1x |
| G | S-hook | 6x |
| Installation tool | 1x | |
| Fasteners | 18x | |
| Drywall Anchors & Screws Kit | 6x | |
| Nano Double Sided Adhesive tape | 1x |
TOOLS NEEDED FOR ASSEMBLY
- pencil
- Cordless Power Drill
- Tape Measure
- Stud Finder
INSTALL INSTRUCTIONS
- Mark the suitable position. Drill holes at the positions you marked.
- Install the wall anchor into the hole.
- Twist the screw in, reserve the hanging space.
- Hang the product and tighten the screws.
Visual Description: A series of illustrations show the process of marking wall positions, drilling holes, inserting wall anchors, and finally hanging the assembled organizer on the wall.
POWER TOOL ORGANIZER PRODUCT MANUAL
The most professional and effective tool storage solution
DETAILED GUIDELINES
Visual Description: A detailed image showcases a fully assembled Spampur Power Tool Organizer mounted on a wall, laden with various power tools (drills, drivers, saws) and accessories, neatly organized. The organizer includes multiple shelves, compartments, and drill holsters, with a power strip integrated for charging capabilities.
THANK YOU FOR YOUR TRUST IN THE PRODUCT
If you have any problems during installation and use, please feel free to contact Spampur customer service, and they will communicate with you within 24 hours for a solution.
E-mail: Spampur-services@outlook.com
SAFETY WARNING
This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children.
Make sure these instructions are read and completely understood before attempting installation. If you are unsure of any part of this installation, please contact Spampur customer service personnel for assistance.