SL2 USER MANUAL

How to Use

1. Color may change from dark colored clothes or leather accessories.
2. Wipe off any dirt immediately.
3. Keep out from contact of water.
4. When battery level is low, residual battery level [?] blinks on the laser LCD display. In this case, only the laser functions are available.
5. When the residual battery level indicator changes to [?], the device may be turned off and inoperable.
6. Please use only the dedicated USB charging cable with a C-type USB port.
7. Please activate GPS in a space without obstacles such as roofs and trees (e.g. starting plaza).
8. Reset: To reset, press and hold the Power [?] and Mode [⚙️] buttons for more than 6 seconds.

Components

• Device
• Pouch
• USB Cable
• User Manual

Device Details

Diagram showing device components:

• 1. Laser Receiving Lens / Objective Lens
• 2. Laser Transmitting Lens
• 3. Mode Button
• 4. Power Button / Measurement Button
• 5. Eyepiece and Focusing Unit
• 6. USB Charging Terminal
• 7. LCD Touchscreen Display
• 8. GPS Receiver
• 9. Tournament Mode / Laser Measurement Indicator

Visual representation of the device with numbered parts.

Basic Functions

Quick Start Guide

1. Power On: Press the [?] button to activate laser and GPS functions.
2. Mode Selection: After turning the power on, press the [⚙️] button to toggle between: Normal Mode -> Pin Mode -> Tournament Mode -> Normal Mode -> Tournament Pin Mode.
3. Unit Conversion: When the [⚙️] button is pressed twice, the unit toggles between meters (M) and yards (Y).
4. Focus Adjustment: Rotate the focus adjustment of the eyepiece to the left and right to adjust focus.

LCD Brightness

Press the [?] and [⚙️] buttons together to adjust brightness in 1 to 6 steps. Brightness level is shown on the numerical laser LCD display.

Laser LCD Display

Diagram illustrating the Laser LCD Display elements:

• 1. GPS Signal
• 2. Measuring Mode: NORMAL (Normal Mode), PIN (Pin Mode)
• 3. Slope Indicator: Uphill ⬆️, Downhill ⬇️
• 4. Distance Compensated Tournament Mode: Actual distance
• 5. Unit of Measurement: Y Yards ⛳️, m Meters ?
• 6. Pin Mode
• 7. Scan Function: ▶️
• 8. Laser Operation Indicator
• 9. Slope
• 10. Linear Distance
• 11. Battery Low Mark: ?

Detailed breakdown of icons and information displayed on the laser screen.

Mode Guidelines

▶ Slope Mode

NORMAL Mode

• Provides distance compensated to the target position, linear distance, slope guidance, and continuous measurement (scanning).
• SCAN: Continuously measure the target while pressing the [?] button.

PIN – GPS Pin Assist Mode

• Measures the slope compensated distance, linear distance, and slope to the pin.
• Pin on the green is accurately and quickly measured based on GPS data.
• GPS pin assist blocks out the back of green based on GPS data and assists to measure only the pin on green.

Tournament Mode

NORMAL Mode

• Measures only the linear distance for pin measurement and scanning functions.
• Pressing and holding the [?] button converts to scanning function.

PIN Mode

• Actual distance from user position to pin.

How to Use GPS Golf Mode

Turn On

Pressing the [?] button activates the laser and GPS function.

Sequence:

• VOICE CADDIE logo ➡️ SL2 device ➡️ [Golf icon] Activate GPS (ON) ➡️ Touch Golf mode ➡️ [Person icon] Search (receive) GPS ➡️ [Map icon] Search golf course ➡️ [Golf course icon] Recognize golf course.

Display

Touching and sliding to left and right toggles the guidance display.

Views:

• Distance View (Range-finding Screen)
• Course View
• Green View

Display Specifications

Hole / Par

Slope Guidance: Uphill ⬆️, Downhill ⬇️

Green Location: R: Right Green, L: Left Green

Back Green Distance, Green Center, Green Front

Unit of Distance: Y Yards ⛳️, M Meters ?

Distance to Pin

Driving Distance Arc and Distance

Course Preview

Green Attack Info: Shows the Length and Width of Greens and Back Green safe distance.

Auto Pin Location, Front Location

SMART COURSEVIEW™

Course Preview

Course preview shows the course layout from tee box to green.

Course View: Touching enters the course preview.

Course Preview: Guides you through the overall course layout from tee box to green.

USER IP

Check the remaining distance with touch from target location and pin. If the user moves, the distance remaining from the current position to the pin is displayed.

BK/ HZ Distance

Touch BK/HZ. Easy to touch on the zoom screen.

Driver Distance Arc

When User sets their driver distance in Settings, the Driver distance Arc shows up on Course View.

Smart Green View™

Real Green Undulation

Green contour lines are divided in 10 steps with 15cm intervals to provide more precise green undulation.

Active Green View

User location is recognized to automatically convert the green direction.

Green Attack Info

Green Attack Info shows the Length and Width of Greens and Back Green safe distance.

Pin Re-Load

User can move the Pin on Green by this mode.

Caution

1. This device may be affected by the weather and surrounding climate such as rain and cloud.
2. Battery consumption may vary depending on user environment and frequency of use.
3. Aiming the laser directly to human eye or gazing at the sunlight or bright light through this device may damage eyesight.
4. The lens, which is coated, needs cautions in cleaning, and should not be directly touched with finger or rough material to prevent damage.
5. The device may be damaged from liquid or other substances. Avoid using in wet environment, and wipe off immediately any dirt.
6. Be careful not to drop, throw, insert impurities or arbitrarily modify by dismantling or burning the device.
7. Regularly recharge the device so that the battery is not fully depleted. Fully depleting the battery may shorten the battery lifetime.
8. Gradual aging and performance degradation from normal use are not grounds for warranty.

Specifications

(1yard=0.91m)

Product Warranty

1. This device has been produced under strict quality control and inspection process, and is subject to consumer’s lawful compensation to damage according to the consumer damage compensation regulation by the Ministry of Finance and Economy.
2. Free repairs within the warranty period are available in case of a problem with the product under normal conditions of use.
3. Repairs at cost are available in case of a problem with the product due to user negligence even within warranty period or after warranty period.
4. For after-sales service or compensation to damage, please produce this warranty card and receipt (bill) of purchase.

Customer Center

Responsible Party – U.S Contact Information

Street Address: 13951 Valley View Ave

City, State: La Mirada, CA Postal Code: 90638 Country: United States

Telephone Number: 562-926-3978

Internet Contact Information: Support@voicecaddie.com

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.