Professional AV Solutions & Equipment | Legrand AV
Instruction Manual for DA-LITE models including: 431x690 HD 0.9, 10101484, 10101484 Extensa 84 Inch Electric Projector Screen, Extensa 84 Inch Electric Projector Screen, 84 Inch Electric Projector Screen, Electric Projector Screen, Projector Screen, Screen
Da-Lite 10101484
File Info : application/pdf, 4 Pages, 2.36MB
DocumentDocumentInstallation WALL MOUNTED (optional) 1. Define the position of the screen case on the wall. Position 2 wall brackets (C) within 10 to 100 cm of either end of the case and one approximately in the middle (case length /2 +/- 50 cm). 4. When the sliding bracket on the case and the wall bracket allign, take the security bolt (C) and screw in place. 1 2 3 2. Move the sliding brackets on top of the case to match the exact positions of the 3 brackets on the wall. 5. Tighten the security bolt on all 3 brackets until the case is fully secured. 3. Raise the screen case to the height of the wall brackets. Make sure the sliding brackets on top of the case align with the wall brackets. 6. Please note! Remove transport-safety brackets from the slatbar before operating the screen. www.LegrandAV.com INSTRUCTIONS FOR Extensa 30751161 Included Hardware 3x 1x A B * A/C 10 - 100 cm Optional Hardware (on request) Product code: 10800156 (3 brackets) C * A/C * A/C 10 - 100 cm L2 L1 16:10 16:9/ UHD 4K Viewing Area (cm) 244 x 390 275 x 440 306 x 490 338 x 540 369 x 590 219 x 390 248 x 440 276 x 490 304 x 540 332 x 590 206 x 390 232 x 440 258 x 490 284 x 540 311 x 590 L1 mm 4434 4958 5486 6016 6550 4434 4958 5486 6016 6550 4434 4958 5486 6016 6550 Extensa L2 mm 4086 4606 5131 5659 6190 4072 4588 5107 5629 6154 4072 4588 5107 5629 6154 Weight (kg) 103 114 125 136 147 103 114 125 136 147 103 114 125 136 147 60 * Bracket weight distribution Please make sure the structure and mounting materials used are capable of carying the weight of the screen. For safety please ensure each bracket can carry the full screen-weight. See chart for reference. Instructions for Use Please see the 'instructions for Use' for detailed instructions for the wiring diagram and how to connect, operate and maintain this projection screen. Included Optional Installation CEILING MOUNTED (included) 1. Define the position of the screen case on the ceiling. Position 2 ceiling brackets (A) within 10 to 100 cm of either end of the case and one approximately in the middle (case length /2 +/- 50 cm). 4. When the sliding bracket on the case and the ceiling bracket allign, take the security bolt (B) and screw in place. 1 2 3 2. Move the sliding brackets on top of the case to match the exact positions of the 3 brackets on the ceiling. 5. Tighten the security bolt on all 3 brackets until the case is fully secured. 3. Raise the screen case to the height of the ceiling brackets. Make sure the sliding brackets on top of the case align with the ceiling brackets. 6. Please note! Remove transport-safety brackets from the slatbar before operating the screen.