ARS 300 Parking Barrier
This product is designed for use on private areas closed to public transit.
Assembly Instructions
Step 1: Identify Components
The diagram shows the main barrier unit, which features three wheels. The necessary hardware for assembly is also displayed: 8x bolts, 8x nuts, 8x washers, and 3x keys.
Step 2: Attach First Base Plate
The diagram illustrates attaching one of the base plates to the barrier arm. This is done using 4x 10mm bolts. A tool is shown being used to tighten these bolts.
Step 3: Attach Second Base Plate
Similarly, the second base plate is attached to the other barrier arm using 4x 10mm bolts. The diagram shows the tightening process and a rotational arrow indicating the engagement of the locking mechanism.
Step 4: Final Assembly
The final diagram shows the ARS 300 barrier in its complete, upright state, ready for installation and operation.
Manufactured by ARCO SRL, located at Via Andrea Costa 24/D, 40017 San Giovanni in Persiceto (BO), Italy. Contact them at +39 051 6810590, 051 6810591, or info@arcosrl.com. Visit their website at www.arcosrl.com.
Designed in Italy by Arco. Made in China.
ARCO s.r.l. reserves the right to amend specifications without notification. Copyright Reserved.