ASCO 4000 Series Group H Controller User's Guide

This comprehensive user's guide details the ASCO Group H Controller, a sophisticated microprocessor-based unit designed for the ASCO 4000 Series Automatic & Non-Automatic Transfer & Bypass-Isolation Switches. It serves as a vital resource for understanding the controller's extensive capabilities and ensuring optimal system performance.

Key Features and Content:

Controller Overview: Explains the user interface, control buttons, indicator lights, and navigation through menus.
Status Information: Covers ATS status, metering, alarms, and controller information screens.
Source Acceptability: Defines the criteria for normal and emergency power sources to be considered acceptable.
Sequences of Operation: Illustrates the operational flow for various models including 4ATS/E, 4ACTS/E, 4ADTS/E, 4NTS/E, 4NCTS/E, and 4NDTS/E during normal source failure.
Settings Configuration: Provides detailed instructions for adjusting voltage, frequency, timers, general parameters, features, and engine exerciser settings.
Screen Messages: Lists and explains all possible messages displayed on the controller.
Description of Operation: In-depth explanations of automatic and non-automatic transfer sequences.
Other Features & Accessories: Details communication options, event logging, optional modules, and accessories.
Appendix: Includes technical specifications, DIP switch settings, and event/statistics logs.

This guide is essential for technicians and operators involved in the installation, configuration, operation, and maintenance of ASCO 4000 Series transfer switch systems.

	ASCO Group G Controller User's Guide for Automatic & Non-Automatic Transfer Switches Comprehensive user's guide for the ASCO Group G Controller, covering its operation, settings, features, and accessories for 3ATS, 3ADTS, 3NTS, and 3NDTS automatic and non-automatic transfer switches. Includes detailed explanations of sequences, controls, and system parameters.
	ASCO Group G Controller User Guide for Automatic & Non-Automatic Transfer Switches This user guide provides comprehensive information on the ASCO Group G Controller, designed for Automatic and Non-Automatic Transfer Switches (3ATS, 3ADTS, 3NTS, 3NDTS). It covers control overview, settings, screen messages, description of operation, and optional accessories.
	ASCO Group G Controller User's Guide for Transfer Switching Equipment This user's guide provides detailed information on the ASCO Group G Controller for Automatic & Non-Automatic Transfer Switching Equipment (3ATS, 3ADTS, 3NTS, 3NDTS), covering operation, settings, safety, and troubleshooting. Document number 381333-400.
	ASCO 7000 Series Three-Phase Wiring for Automatic Transfer Switches Technical guide detailing the three-phase wiring configurations for ASCO 7000 Series Automatic Transfer and Bypass-Isolation Switches (Type 7ATB), rated for 2600-4000 Amperes. Covers connections for Normal power, Emergency power, and Load.
	ASCO 300 Series Transfer Switches Wiring Diagram for 600 Amperes with Group G Controls This document provides detailed wiring diagrams and technical specifications for ASCO 300 Series Transfer Switches, specifically the J3ATS and J3NTS models rated at 600 Amperes, featuring Group G controls. It covers general information, feature descriptions, wiring for various circuits including main power, operator, normal and emergency sources, load terminals, and control signals. The document also details optional accessories like the relay expansion module (18RX), uninterruptible power supply (1UP), and load current metering (23GB), along with their wiring configurations. It includes explanations of catalog number codes, physical diagrams, and wire run listings for comprehensive installation and maintenance guidance.
	ASCO 300 Series Transfer Switches Wiring Diagrams Detailed wiring diagrams and technical information for ASCO 300 Series Single Phase Transfer Switches (D3ATS/D3NTS) with Group G Controls, covering models from 30 to 230 Amperes.
	ASCO Series 300 Automatic Transfer Switches Operator's Manual Comprehensive operator's manual for ASCO Series 300 Automatic Transfer Switches (ATS), covering installation, sequence of operation, testing, service, adjustments, and control features for models E-design, 260 A, and 400 A.
	ASCO Series 300 Power Transfer Switches: Reliable Backup Power Solutions Explore ASCO Series 300 Power Transfer Switches, designed for commercial and light industrial facilities. Learn about automatic, non-automatic, and manual models for reliable backup power, enhancing safety, and sustaining operations.

Key Features and Content:

Related Documents