Introduction to the M1 LITE Scooter
Welcome to the Metro Mobility M1 LITE, a mobility scooter designed for individuals who may experience difficulty walking. With over 8 years of experience, Metro Mobility is a leading manufacturer of mobility equipment, committed to providing quality, safety, and durability. This manual is essential reading before operating your scooter, offering comprehensive guidance on its use, maintenance, and safety features. The M1 LITE is classified as a Category C vehicle under European standard EN 12184 and is suitable for users up to 120kg (264lbs). It is designed for use on footpaths and for crossing roads, complying with relevant European directives for medical devices and electromagnetic compatibility.
Metro Mobility is proud to be BS/EN ISO 9001 accredited, ensuring high standards across all business operations. For any assistance or further information, please contact your local dealer.
Key Features and Operation
- Controls: All drive controls are located on the Tiller Control Box, including the On/Off Switch, Battery Gauge, Speed Control, Headlight, Horn, and Directional Control Levers.
- Speed Control: Adjust your maximum speed using the Preset Speed Knob.
- Battery Gauge: Monitor your battery charge level, indicated by RED (empty), YELLOW (charging), and GREEN (fully charged). For accurate readings, stop the scooter and check the gauge.
- Lights: Use the blue button on the fascia panel to operate the headlights for increased visibility.
- Throttle Lever: Offers finger-tip control for forward and reverse motion. Pull the lever with the right hand for forward or the left hand for reverse. Pushing the lever with the left thumb for forward or the right thumb for reverse is also possible.
- Horn: The horn button provides an audible warning sound to alert pedestrians.
- Key Switch: Turns the scooter ON and OFF. The key cannot be removed when the scooter is in the ON position.
Assembly and Transporting
Assembly: When lifting, always use proper lifting techniques. Ensure the freewheel mechanism is engaged before assembly. Attach the seat and tiller securely. The battery must be charged for 12 hours before first use to prevent damage.
Transporting: The scooter can be quickly disassembled for transport. Remove the basket and seat, lower the tiller, and carefully lift the scooter into a vehicle's luggage compartment using the provided lifting handles and front bumper. Always secure all parts before transportation and ensure the freewheel lever is engaged to prevent movement.
Important Safety Information
- Always read and understand this manual before operating the scooter.
- Consult a healthcare professional or dealer if you have any doubts regarding the instructions or warnings.
- Failure to understand operation can lead to injury or damage.
- Serious injury can occur from falls. Do not transport a user seated in the scooter in any moving vehicle. Transfer the user to the vehicle's seating system and use the vehicle's restraints.
- Intended use is for disabled, sick, or elderly persons. Avoid driving on unsound surfaces like mud, water, sand, or loose gravel.
