AQUASKY RGB II 60

Product Features

The AQUASKY RGB II 60 is a professional LED lighting system designed for planted aquariums. It utilizes special RGB LED chips to promote healthy aquatic plant growth and create colorful, beautiful aquascapes. The system offers various controls, including dimming and timer settings, via the dedicated ADA controller application. A soft lighting mode allows for gentle control of light transitions during turn-on and turn-off.

Compatible Aquarium Tanks:

• Cube Garden W60xD30xH36 (cm) - Glass thickness 6mm
• Cube Garden W60xD30xH25 (cm) - Glass thickness 5mm
• Cube Garden W60xD30xH45 (cm) - Glass thickness 6mm
• Cube Garden W60xD45xH36 (cm) - Glass thickness 6mm

The lighting unit's legs are designed to hang on the outside of the aquarium, making it compatible with W60 aquariums of various glass thicknesses.

Product Parts

• Lighting Unit
• Control Unit
• AC Adapter
• Power Supply Cord
• Top Surface (radiation fin)
• Reset Button
• Reset Pin
• Power Plug

Operating Instructions

Without the dedicated application:

1. Install the lighting unit on the corresponding Cube Garden as shown in the figure. Be cautious not to drop the unit into the water during installation.
2. Connect the control unit and AC adapter to the Lighting Unit. Plug the AC adapter's power plug into an electrical outlet.
3. Turn on the Power Supply Switch for lighting. To turn off the light, switch off the Power Supply Switch.

With the ADA controller application:

1. Download the ADA controller application to your smartphone or tablet from the Google Play Store or Apple App Store.
2. Connect the control unit and AC adapter to the lighting unit, and plug the AC adapter's power plug into an outlet.
3. Open the ADA controller application and connect to the device.
4. To return to the initial mode, press and hold the reset button for at least 5 seconds, then release it.

Note: The illumination intensity can be adjusted using the dedicated application. Continued illumination at maximum intensity may reduce component durability.

Product Specifications

Safety Precautions

▲ Warning

• Do not disassemble or modify the product. This may cause fire, electric shock, or malfunction.
• If the product is dropped or severely impacted, discontinue use to prevent fire, electric shock, or malfunction.
• Use the product indoors only. Avoid places with high humidity or dust.
• Do not use the product outside the specified operating temperature range, in direct sunlight, in extremely humid conditions, in vibrating environments, or where it may come into contact with water, rain, or wind. This could lead to fire, electric shock, or malfunction.
• Avoid contact with water. If the product gets wet, discontinue use immediately to prevent electric shock or malfunction.
• Never insert or remove the power plug with wet hands, as this poses a risk of electric shock.
• Do not cover the product with flammable materials such as cloth or paper. Avoid using the product near flammable materials to prevent fire hazards.

▲ Caution

• Ensure the product does not fall into water or get wet.
• Keep the lighting unit, control unit, AC adapter, and power plug away from water. The product is not waterproof.
• Water entering the power plug can cause fire or electric shock. If the electrical outlet is located below the aquarium, it is recommended to use a drip loop for the power cord or an optional accessory like the Power Cord S-70 to keep the outlet away from water.
• Do not place the lighting unit directly on the floor or other surfaces while powered on.
• Dimming must be performed via the dedicated application.
• The lighting unit may become hot during operation due to heat radiation; this is normal.
• The lighting unit, control unit, and AC adapter can become very hot during and shortly after use. Allow them to cool down completely before handling to avoid burns. The top surface (radiation fin) and ballast of the lighting unit can become extremely hot.
• The OLED light of the lighting unit is not replaceable.
• Do not apply adhesive tape to the product or expose it to direct sunlight, as this may cause discoloration or deterioration.
• Do not use the product in locations with unstable voltage, as it may cause flickering or blackouts.
• Avoid using radios or televisions near the product, as it may cause noise interference.
• When unplugging the product, do not pull the power cord. Always hold the AC adapter or power plug.
• For repairs, contact the place of purchase. Ensure the product is properly packaged for transport to prevent damage.
• Always unplug the power plug before cleaning or maintenance.
• Do not insert metal objects or flammable materials into product gaps, as this could cause fire, electric shock, or malfunction.
• Be careful not to cut the insulation of the power cord with sharp objects. Damaged insulation can lead to leakage, electric shock, or fire.
• The supplied power cord is exclusively for the AC adapter of this product. Use only the supplied power cord with the AC adapter. Using a different power cord may cause damage or accidents. Do not use the supplied power cord with any other product.
• Do not forcibly bend, twist, or pull the power cord, as this may damage it and cause fire or electric shock.
• If the power cord is damaged (e.g., exposed wires), stop using it immediately to prevent serious accidents like fire or electric shock.
• If the control unit, AC adapter, or power plug gets wet, it may cause fire or leakage. If the power strip is below the aquarium, ensure the power cord has a drip loop so the lowest point of the cord is below the control unit, AC adapter, and power plug.
• Do not look directly at the LEDs while the light is on.
• Keep the product out of reach of children to prevent electric shock or injury.
• When installing or removing the control unit or AC adapter, ensure the power plug is unplugged for some time to avoid sparks.

FCC Compliance Information

CAUTION: Changes or Modifications not expressly approved by the party responsible could void the user's authority to operate this device.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.