Instructions for KIRSTEIN de models including: MTO3B Bluetooth Speaker, MTO3B, Bluetooth Speaker, Speaker

00097036 E concat

00097036 E concat

2 giorni fa — To pair with Bluetooth, first press the Bluetooth button until the Bluetooth blinks, then turn on the. Bluetooth Settings on your mobile device, ...

To pair with Bluetooth, first press the Bluetooth button until the Bluetooth blinks, then turn on the. Bluetooth Settings on your mobile device, ...

To pair with Bluetooth, first press the Bluetooth button until the Bluetooth blinks, then turn on the. Bluetooth Settings on your mobile device, ...

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 2 Pages, 141.59KB

Document Document

1.
BASS Use the bass control for low frequency adjustment, turn left for decreasing low frequencies and turn right for increasing low frequencies. 2.
TREBLE Use the treble control for high frequency adjustment, turn left for decreasing high frequencies and turn right for increasing high frequencies.

3.
VOLUME With the volume control it's possible to adjust the input sensitivity, turn left for decreasing the input sensitivity and turn right for increasing the input sensitivity. 4.
POWER SWITCH Turns the loudspeaker on/off. Make sure the volume knob is set to minimum before turning it on! 5.
POWER INPUT Connect the included power adapter to this input and connect the other end of the cable to a power source. 6.
OUTPUT RCA connector for slave speaker (right). 7.
INPUT RCA input left and right. 8. Bluetooth: To pair with Bluetooth, first press the Bluetooth button until the Bluetooth blinks, then turn on the Bluetooth Settings on your mobile device, search the list of "MTO3B" devices, select it, and complete the pairing process.Once the pairing is complete, the Bluetooth button will be fixed in blue and you can enjoy the transmission from your mobile device.If you press the bluetooth button again, it will turn off.