GEEKOM Mini IT12 Setup and Safety Guide

Product Overview

The GEEKOM Mini IT12 is a compact and powerful mini PC designed for office, design, and entertainment use. It is intended for indoor use only.

Installation Guide

Step 1: Prepare the Chassis

Open the chassis to access internal components.

Step 2: Install M.2 SSD

Install the M.2 SSD into the designated slot.

Step 3: Install DDR4 RAM

Install the DDR4 SODIMM memory modules into the slots.

Step 4: Secure Components

Fasten the installed components with screws.

Step 5: Close the Chassis

Reassemble the chassis, ensuring all parts are securely fitted.

Step 6: VESA Mount (Optional)

The device can be mounted using a VESA compatible bracket for flexible placement.

Step 7: Connect Power and Peripherals

Connect the AC power adapter and any necessary peripherals.

Safety and Caution Information

AC Power Adapter: Use only the provided AC adapter. Risk of electric shock, fire, or burns if an incorrect adapter is used. Indoor and dry locations only. Do not open the enclosure. The adapter is rated for 0°C to 35°C (32°F to 95°F). Connect to a properly wired and grounded outlet.

Battery Safety: Risk of explosion if the battery is replaced with an incorrect type. Recycle batteries where possible. Dispose of used batteries according to local environmental regulations.

Compliance: Failure to use the included power adapter violates regulatory compliance and may pose safety hazards.

Temperature: Operate in ambient temperatures between 0°C and 35°C (32°F and 95°F). Avoid heat sources, direct sunlight, or extreme temperatures.

Medical Devices: This device may interfere with pacemakers, hearing aids, or other medical devices. Maintain a separation distance of 20 cm (8 inches) between the device and medical devices.

Modifications: Unauthorized modifications to the wireless solution, thermal solution, components, or enclosure violate compliance requirements and can create safety hazards.

Technical Specifications

• Processor: 12th Gen Alder Lake Processor
• Graphics: Intel Iris Xe
• RAM: Dual-channel DDR4 SODIMM
• Storage: 1 x M.2 PCIe SSD, 1 x 2.5" SATA HDD (7mm)
• Operating System: Windows 11
• Wireless Connectivity: Bluetooth 5.2, Wi-Fi 6
• Ethernet: 2500 Mbps LAN
• Dimensions: 117 x 112 x 51.5 mm
• Power Input: 19V 3.42A (65W), 19V 4.74A (90W), 19V 6.32A (120W)

FCC Compliance

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with instructions, it may cause harmful interference to radio communications. If interference occurs, try to correct it by reorienting or relocating the receiving antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer or technician.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Maintain a minimum distance of 20cm between the radiator and your body. Transmissions remain within the U-NII-1 and U-NII-3 bands as per 47 CFR FCC Part 15.407(g).

Connecting to a Network

1. Click the network icon in the Windows notification area.
2. Select the desired network and input any required information (e.g., Wi-Fi password for secured networks).

Customer Support

For assistance, please contact: support@geekompc.com

Visit our website: www.geekompc.com