Tyger Auto: Contact Us
Instruction Manual for TYGER models including: TG-LD2F60358 Lander Running Board, TG-LD2F60358, Lander Running Board, Running Board, Board
Tyger Auto Lander Running Board Compatible with 2019-2023 Ford Ranger | Supercrew Cab | TG-LD2F60358 | Drop Step Side Step Rail Nerf Bars
File Info : application/pdf, 4 Pages, 3.07MB
DocumentDocumentTYGER LANDERTM TG-LD2F60358 BEFORE INSTALLATION READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. FAILURE TO IDENTIFY DAMAGE BEFORE INSTALLATION COULD LEAD TO A REJECTION OF ANY CLAIM. IF MISSING PARTS OR ANY DAMAGE FOUND, PLEASE TAKE A PICTURE FOR THE CLAIM PURPOSE. TO FILE YOUR CLAIM, PLEASE VISIT: WWW.TYGERAUTO.COM/CONTACT TORQUE VALUES Fastener Size 6mm 8mm 10mm 12mm 14mm Class 8.8 Torque (ft-lbs) 6-7 15-16 31-32 54-55 87-88 Class 10.9 Torque (ft-lbs) 6-7 22-23 44-45 78-79 125-126 Parts List x1 Driver/Left Tyger Lander x1 Passenger/Right Tyger Lander x1 Driver/Left Front Mounting Bracket x1 Passenger/Right Front Mounting Bracket x1 Driver/Left Center Mounting Bracket x1 Passenger/Right Center Mounting Bracket x1 Driver/Left Rear Mounting Bracket x1 Passenger/Right Rear Mounting Bracket x8 10mm x 35mm Hex Bolts x12 10mm x 25mm Hex Bolts x12 10mm Lock Washers x28 10mm x 27mm OD x 3mm Flat Washers x8 10mm Nylon Lock Nuts x4 8mm x 25mm Combo Bolts Customer Support: www.TygerAuto.com/contact-us.html 1/4 V210225 STEP 1 REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. STEP 2 Starting from underneath the Passenger/Right body panel, locate the front mounting location and the threaded holes in the body panel (Fig 1). Remove the plastic plugs covering the holes. Passenger/Right Side Installation Pictured (2) 10mm x 25mm Hex Bolts (2) 10mm Lock Washers (2) 10mm Flat Washers Front (Fig 2) Attach the Passenger/Right Front Mounting Bracket to the front location STEP 4 Repeat STEPS 2 & 3 to attach (2) Rear Mounting Brackets to the center and rear locations (Figs 3-5). DO NOT tighten hardware. (Fig 1) Passenger/Right front mounting location STEP 3 Select the Passenger/Right Front Mounting Bracket. Attach the Mounting Bracket to the front location with (2) 10mm x 25mm Hex Bolts, (2) 10mm Lock Washers and (2) 10mm Flat Washers (Fig 2). DO NOT tighten hardware. (Fig 3) Passenger/Right center mounting location Customer Support: www.TygerAuto.com/contact-us.html 2/4 (2) 10mmx 25mm Hex Bolts (2) 10mm Lock Washers (2) 10mm Flat Washers (2) 10mm x 35mm Hex Bolts (4) 10mm Flat Washers (2) 10mm Nylon Lock Nuts Front (Fig 4) Attach (1) Passenger/Right Rear Mounting Bracket to the center location (Fig 6) Attach the Passenger/Right Tyger Lander to the Front and Rear Mounting Brackets (Fig 5) Passenger/Right rear mounting location STEP 6 Attach the Tyger Lander to the Center mounting Bracket with (2) 8mm Combo Bolts (Fig 7). DO NOT tighten hardware. (2) 8mm Combo Bolts Front STEP 5 Select the Passenger/Right Tyger Lander. Place the Tyger Lander onto the cradle of the Center Mounting Bracket. IMPORTANT: DO NOT slide the Tyger Lander front to back or damage to the finish may result. Attach the Tyger Lander to the Front and Rear Mounting Brackets with (4) 10mm x 35mm Hex Bolts, (8) 10mm Flat Washers and (4) 10mm Nylon Lock Nuts (Fig 6). DO NOT tighten hardware. (Fig 7) Attach the Passenger/Right Tyger Lander to the Center Mounting Bracket Customer Support: www.TygerAuto.com/contact-us.html 3/4 STEP 7 Level and adjust the Tyger Lander and tighten all hardware. STEP 8 Repeat STEPS 1-7 to attach the Driver/Left Tyger Lander. STEP 9 Do periodic inspections to the installation to make sure that all hardware is secure and tight. Customer Support: www.TygerAuto.com/contact-us.html 4/4