Owner's Manual for formlabs models including: V1 FLIBFL01, IBT Flex Resin, Flex Resin, Resin
Technische Spezifikationen der SLA-3D-Drucker von Formlabs im Vergleich | Formlabs
Resin Library and 3D Printing Materials | Formlabs Dental
IBT Flex Resin DENTAL RESIN A Flexible, and Tear-Resistant Material for Printing Highly Accurate Indirect Bonding Trays and Direct Composite Restoration Guides with Enhanced Translucency 3D print flexible and tear-resistant translucent trays and guides that save you time and deliver consistent, predictable outcomes. IBT Flex Resin is a Class I biocompatible material with enhanced flexibility, strength, translucency, and color to guarantee optimal clinical outcomes while providing a great patient experience and for seamless and precise transfer of orthodontic brackets and restorative composite materials. Direct Composite Restoration Guides Indirect Bonding Trays V1 FLIBFL01 Prepared 14/09/2023 Rev. 01 14/09/2023 1 * May not be available in all regions To the best of our knowledge the information contained herein is accurate. However, Formlabs, Inc. makes no warranty, expressed or implied, regarding the accuracy of these results to be obtained from the use thereof. Material Properties Disinfection Compatibility Tensile Strength Tensile Modulus Elongation at Break Hardness Shore A Transparency (2 mm sample) Post-Cured 1, 2 7.2 MPa 8 MPa 135 % 77 - 80A 85% Method ASTM D412 ASTM D412 ASTM D412 ASTM D2240 - Disinfection Compatibility Chemical Disinfection 70% Isopropyl Alcohol for 5 minutes IBT Flex Resin has been evaluated in accordance with ISO 10993-1:2018, Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process, and ISO 7405:2018, Dentistry - Evaluation of biocompatibility of medical devices used in dentistry, and passed the requirements for the following biocompatibility risks: ISO Standard ISO 10993-5:2009 ISO 10993-23:2021 ISO 10993-10:2021 Description 3 Met requirements of test Met requirements of test Met requirements of test The product was developed and is in compliance with the following ISO Standards: ISO Standard EN ISO 13485:2016 EN ISO 14971:2012 Description Medical Devices Quality Management Systems Requirements for Regulatory Purposes Medical Devices Application of Risk Management to Medical Devices 1 Material properties may vary based on part geometry, print orientation, print settings, temperature, and disinfection or sterilization methods used. 2 Data was obtained from parts printed using Form 3B(+), 100 m, IBT Flex Resin settings, and using post-processing instructions listed in the IBT Flex Resin Manufacturing Guide. 3 IBT Flex Resin was tested at NAMSA World Headquarters, OH, USA. 2Adobe PDF Library 17.0 Adobe InDesign 20.0 (Macintosh)