Instruction Manual for dlink models including: DAP-2662 Nuclias Connect Wave 2 Access Point, DAP-2662, Nuclias Connect Wave 2 Access Point, DAP-2662 Wave 2 Access Point, DAP-2662 Access Point
File Info : application/pdf, 4 Pages, 256.33KB
DocumentDocumentDAP-2662 Firmware Release Notes Firmware Version: 1.05r083 Published Date: 2021/11/12 Content: Upgrading Instructions:........................................................................................ 2 Upgrading by using Web-UI ........................................................................... 2 New Features:..................................................................................................... 3 Changes of MIB & D-View Module: ......................................................................... 3 Problems Fixed: .................................................................................................. 3 Known Issues: .................................................................................................... 4 Related Documentation: ....................................................................................... 4 1 DAP-2662 Firmware Release Notes Revision History and System Requirement: Firmware Version Date Model Hardware Version 1.00r019 1.01r029 2019/12/02 2020/07/06 DAP-2662 A1 Upgrading Instructions: D-Link AP supports firmware upgrading via Web-UI. You may download the firmware from D-Link web site http://tsd.dlink.com.tw. Please also 1. Make sure your DAP-2662 has a manually assigned static IPv4 address or get a valid IPv4 address from DHCP server before upgrading FW. 2. Do not power off your DAP-2662 when FW upgrading. 3. Upgrade to the intermediate FW (DAP-2662_firmware_v1.05p02r081.bin) first and then upgrade to FW (DAP-2662_firmware_v1.05r083.bin) Upgrading by using Web-UI 1. Connect a workstation to the LAN port of Access Point. 2. Open the web browser of workstation and entering the IP address of the AP. The system default IP address setting is dynamic ip, and you can enter http://dap2662.local to login, if it cannot get ip address from DHCP server, it's ip address will back to 192.168.0.50. 3. Enter administrator's username and password, username and password are "admin" by default. To update the AP's firmware, click Maintenance > Firmware and SSL Certification Upload FW upgrade steps: i. Upgrade intermediate FW -> "DAP-2662_firmware_v1.05p02r081.bin" ii. Upgrade to FW -> "DAP-2662_firmware_v1.05r083.bin" 2 DAP-2662 Firmware Release Notes New Features: 1. Supporting Fast roaming with DNC 2. Supporting Social Login with DNC 3. Add session management across AP 4. Support FOTA firmware upgrade. 5. Add 2 countries Slovania and Kosovo 6. Supporting Captive Portal Radius Accounting 7. Support IPv6 SNMP setting 8. Support User list upload with DNC 9. Support NAS ID Discovery with DNC 10. Support Wall Garden with DNC Changes of MIB & D-View Module: None Problems Fixed: Firmware Version Problems Fixed 1. Fix session timeout issue (When client disconnect manually and reconnect before session expire, so no captive portal is performed), of client having infinite session time. 2. Fix captive portal [radius authentication] failure and its session timeout issue. 3. Fix captive portal [ldap] faiulre and its session timeout issue. 4. Fix captive portal [user/password] and its session timeout issue. 1.05r083 5. Fix captive session timeout not working if session time is not specified. 6. Fix session time lost during 'check table' operation 7. Fix iPhone cannot perform social login issue. 8. Fix standalone user account not working issue. 9. Fix session not timeout after expire. 10. [D-Track] Allow 0 and 255 for the last digit of IP Address and Gateway Address 11. [D-Track] Fix AP reported incorrect value for Fixed Channel, Fixed Power, Current Channel, Current Power, causing JSON format error, resulting in preventing device from boarding failed. 12. [D-Track] AP cannot boarding even with Internet Access. 13. [D-Trak] WPA-Enterprise is used when WPA-PSK only is set 3 DAP-2662 Firmware Release Notes 14. [D-Track] DNA 4.0.0.19 discovers DAP, but can't change IP/update firmware or other settings 15. [D-Track] Following password cannot be set. 16. [D-Track] Fix QoS and Bandwidth limit has no effect issues. Known Issues: Firmware Version Known Issues 1.05r083 If Manager by DNC use domain, The HTTP packets of Redirect 302 should be domain name rather than DNC IP address when CP is passcode. Related Documentation: DAP-2662 manual v1.00 4