Installation Guide for HOOKE ROAD models including: BXG.1011-S Front Bumper, BXG.1011-S, Front Bumper, Bumper

ubox-huang

User Manual (PDF)

Hooke Road Wrangler TJ Front Winch Bumper Rear Bumper with Tire Carrier Combo Compatible with Jeep Wrangler TJ 1997-2006 (Steel Black) : Automotive

BXG.1011-S

Hooke Road Bumper Installation Instructions | Installation Manual – Hooke Road 4x4

Hooke Road Bumper Installation Instructions | Installation Manual – Page 2 – Hooke Road 4x4

PDF preview unavailable. Download the PDF instead.

BXG.1011-S ?v=1725525244
Front Bumper
(1) Contents:

BXG.1011-S

Qty Part Name 6 Hex Bolt
2 Hex Bolt
6 Split Lock Washer 2 Split Lock Washer 6 Flat Washer 2 Flat Washer 2 Flange Hex Lock Nuts

Size(mm) Picture M12*30
M8*20
D12 D8 M12*30*2 M8*16*1.2 M8

(2) Tools required:
a.19mm Wrench; b.19mm Socket Wrench; c.7mm HEX Socket Wrench;

(3) Installation time:
About 1 hour, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.1011-S), please scan the QR code.

Step 1: Remove the original front bumper.
1
Step 2: Install the bull bar with the Hex Bolt (M8*20), Split Lock Washer (D8), Flat
Washer (M8*16*1.2), Flange Hex Lock Nuts (M8).

Step 3: Install the bumper on the vehicle. As shown on the RIGTH.
2

Step 4: Use 19mm Socket Wrench or 19mm Wrench to tighten the bumper
with the Hex Bolt (M12*30), Split Lock Washer (D12), Flat Washer (M12*30*2) . (1) First,Install the upper bolt holes.

3

4

5

6

(2)Second,install the bottom bolt hole with the Hex Bolt (M12*30), Split Lock Washer (D12), Flat Washer (M12*30*2).

7

8

Step 5: Install another side in the same method.
Step 6: Install the D-rings.
Step 7: The installation is complete. We hope you enjoy a wonderful off-road
life with this quality Hooke Road product!

Attention:
1.The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
The figure 2 & figure 4-6 above are slightly different from the actual one,but the installation method is the same.
2.Please feel free to contact your distributor if you have any kind of question about your purchase.
Hooke Road to find your parts


WPS 文字