Roxcore Blaster One
Item: 97685
Overview
The Roxcore Blaster One is a portable speaker. The top of the speaker features a circular layout of controls:
- 1. Power button
- 2. Forward button
- 3. Handsfree button
- 4. Back button
- 5. Play/pause button
One side of the speaker has ports:
- 6. Charging port (Micro USB)
- 7. AUX in port
The other side features volume controls:
- 8. Volume + control
- 9. Volume - control
Specifications
| Power: | 20 W (2x 10 W) |
| Bluetooth version: | 4.2 |
| Bluetooth range: | 10 metres |
| Line in (AUX): | 3.5 mm |
| Battery time: | 6 - 9 hours |
| Charging port: | Micro USB (5 V, 2 A) |
| Charging time: | 3 hours (with 2 A) |
| Dimensions (WxHxD): | Ø75 x 195 mm |
Included
- Speaker
- 60 cm Micro USB cable
- 60 cm 3.5 mm cable
- Manual
Use
Battery
The battery lasts for 6 - 9 hours when fully charged. The LED on top of the speaker will blink red if the battery is lower than 10 %.
Charge
Connect the Micro USB cable to the charging port (6) and a USB charger. The LED will shine red whilst charging if the speaker is off, or blink red and blue if it is activated. The speaker is fully charged after 3 hours (with 2 A charge). The LED will shine green when it is fully charged. The speaker can be used while it is charging.
Pairing (Bluetooth)
Turn on the speaker with the Power button (1), press and hold it for 3 seconds. The LED will blink blue. Activate Bluetooth on your device. Search for nearby Bluetooth devices and choose "Blaster One" from the list. Once connected, the LED will shine blue. The speaker can remember up to 8 previous devices and will automatically pair up with one if possible. Press and hold the play/pause button (5) to disconnect the currently paired Bluetooth device.
Control music (only if connected via Bluetooth)
With the buttons, you can control the music on a connected Bluetooth device:
- Back button (4): Press once, hold, or double-click to rewind to the start of a song.
- Play/pause button (5): Press once to play or pause the music.
- Forward button (2): Press once, hold, or double-click to play the next song.
Handling calls (only if connected via Bluetooth)
- Answer call: Press the handsfree button (3) once.
- End call: Press the handsfree button (3) once. Bluetooth music will resume.
- Decline call: Press and hold the handsfree button (3).
- Redial last called number: Press and hold the handsfree button (3) for 3 seconds.
Connect via cable
Connect an audio cable to the AUX in (7) port and your device's port. The LED will shine green. The speaker will automatically disconnect any currently connected Bluetooth devices. You can manually activate the AUX mode by pressing the power button (1) once to switch the current audio mode.
Volume
Turn the volume wheel clockwise to raise the volume (8). Turn the volume wheel counter-clockwise to lower the volume (9). The speaker will emit a beep when it reaches maximum volume.
Troubleshooting
If there is no volume (or low), try to raise the volume on your device and the volume on the speaker.
Bad sound quality or no sound at all: For Bluetooth connection, check that the correct device is connected and not too far away. For cable connection, check that the cable is plugged all the way in at both ends and that the cable is not faulty.
Safety information
The speaker contains a rechargeable Li-ion battery and the battery cannot be replaced.
