Manuals+

Installation Guide for MeTra models including: JP-APJLJT 12V Accessory Power, JP-APJLJT, 12V Accessory Power, Accessory Power

JP-APJLJT Installation Instructions

Aaron Newman

Click Here For The Manufacturer's Description

JP-APJLJT - METRA 12V ACCESSORY POWER ADAPTER FOR JEEP JL/JT

Metra - Accessory Power Adapter for Select 2012-2018 Jeep Vehicles Installation Guide

Metra JP-APJLJT 0086429416103 Multi


File Info : application/pdf, 2 Pages, 333.38KB

PDF preview unavailable. Download the PDF instead.

INSTJP-APJLJT web 
JP-APJLJT | 12V Accessory Power
INSTALLATION INSTRUCTIONS

2012 ­ 2018 Wrangler JK / JKU

1. Remove cubby or power window switch, and remove screw. Then remove screw from upper storage tray.

2. Remove kick panel, and remove two upper screws.

3. Lift up on dashboard cover.

4. Pull HVAC panel, starting from top towards interior. Locate the power outlet and unplug OE connector.

5. Connect t-harness and route accessory wires as indicated: · Red wire: 12V 5Amp fused (accessory/key) power · Black wire: Harness Ground
6. Reinstall panels in reverse order of removal.
MetraOnline.com

JP-APJLJT | 12V Accessory Power
INSTALLATION INSTRUCTIONS

2018-UP Wrangler JL, 2020-UP Gladiator JT

1. Unclip and remove the panel below the steering column.

2. Using panel removal tool, remove the Start/HVAC panel

3. Remove (1) screw holding the accessory panel to the subdash. Locate panel clips and carefully pull each section free; this may require the panel removal tool.

4. Locate the power outlet. Disconnect the power outlet harness and connect the accessory power harness to that connector. Insert the other accessory power harness connector into the disconnected plug.

5. Connect t-harness and route accessory wires as indicated: · Red wire: 12V 5Amp fused (accessory/key) power · Black wire: Harness Ground

6. Reinstall panels in reverse order of removal.
MetraOnline.com

References

Microsoft Word 2019