User Guide for FX Luminaire models including: fx-244-revb-qg-luxor-en-web, Luxor Smart Landscape Lighting Control System, Landscape Lighting Control System, Lighting Control System, Control System

Luxor Quick Start Guide

Luxor Smart Landscape Lighting Control System | FX Luminaire

Library List | Page 11 | FX Luminaire

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 2 Pages, 543.88KB

LUXOR®® QUICK START GUIDE

The Luxor lighting controller manages groups of lights and light intensity at desired times. Two-wire connections power and communicate with all lights in a system.

LUXOR





 


1. Facepack 2. LCD screen 3. Clickable scroll wheel 4. Home button 5. Back button 6. Fixture assignment ports





 





2. Select your desired group and press Program. If assignment fails, press Program again.
Controller Setup
1. Select Setup from the Home screen.
2. Enter the current Month, Day, Year, and Time (Hour, Minutes, Seconds). Then select Auto.
3. Select your desired Language.
Location Setup
1. Select your Location from the Setup screen. 2. Select your Region.*

Wireless Control

Wireless Control Options: Option A LAN connection Option B Wi-Fi module

A

B

LAN Wi-Fi

A. LAN Connection
1. Install a network cable into the LAN connector located on the back side of the Luxor facepack.
2. Select Setup from the Home screen.

7. Core cover 8. Chassis 9. Facepack connection 10.Chassis LED 11. Terminal blocks 12.Fuse cover
Fixture Assignment
1. Enter assignment mode by inserting stripped wire leads into the assignment ports on the front of the Luxor controller facepack.

3. Manually enter or select your Map. 4. Use the scroll wheel to navigate to the desired
location and toggle between up/down and left/right.

3. Select LAN. 4. Confirm the LAN field displays "Connected."

*The time zone and longitude/latitude will automatically change with your selected region.

LUXOR® QUICK START GUIDE (CONTINUED)

B. Wi-Fi Module
1. Install the WIFIMOD2 or WIFIMOD2RMT into the Wi-Fi connector on the back side of the Luxor facepack.
2. Select Setup from the Home screen. 3. Select Wi-Fi.

Colors
1. Select Color from the Home screen. 2. Scroll to your desired color label (C1­C250). 3. Scroll to the Color field. Press the scroll
wheel to enter the color on the Color Selector screen.

Themes
1. Select Theme from the Home screen. 2. Select your desired theme letter (A­AN). 3. Enter your desired Group(s), Color, and
Intensities. 4. Press Test to temporarily turn on the desired
Theme.

4. Scroll to the Network field and press the scroll wheel.
5. Select your desired network from the list of available networks.
4. Scroll to the Test Grp field and select your desired group to test the color.
6. If necessary, enter your network password and press OK.

Programs
1. Select Program from the Home screen. 2. Select your desired Program (A­G). 3. Enter your desired event type (Sunset,
Sunrise, or Time) in the Event field. 4. Enter the time you want the event to occur in
the Time field. 5. Enter the Group or Theme that you want to
be activated during the event. 6. For Groups, select the Color (if applicable). 7. Enter your desired intensity in the % field.
Group events can be 1%­100%. Themes can be ON/OFF.

7. Confirm the Wi-Fi field displays "Connected."

Color Wheel
1. Select Color Wheel from the Color screen. 2. Scroll to your desired Color Wheel label
(CW1­CW10).

Best practice: To ensure all lights are turned off, set the last event in the Grp/Thm field to "ALL LIGHTS" and set the % field to OFF.

3. Select Start Color. Any color (C1­C250) can be used as a starting color.
4. Set your desired time interval (5 seconds to 300 seconds) for your Color Wheel cycle. The shorter the duration, the faster the cycle.

LANDSCAPE & ARCHITECTURAL LIGHTING | Visit fxl.com

FX-244 A EN 5/25



References