Introduction
The RISCO Seismic Detector is engineered to safeguard vaults, safes, reinforced concrete walls, steel armored cabinets, and doors against intrusion. It meticulously monitors surface vibrations and temperature, reacting to various attack methods including sledgehammers, diamond drills, explosives, hydraulic tools, and thermal tools.
This detector offers versatile operation, functioning as a standard relay detector compatible with any control panel, or as a BUS accessory when integrated with RISCO Group's control panels via the RS485 BUS, enabling advanced remote control and diagnostic features.
Key Features
- Piezo sensor for sensitive detection
- Low/High temperature monitoring
- Detection range up to 5 meters (16 feet) radius
- Tamper protection for enhanced security
- Anti-drilling shield
- Remote sensitivity control
- Analog signal output
- Bar graph LED indicator for visual feedback
- Remote self-test capability
- Supports both Stand-alone and RISCO BUS connections
Installation Overview
This guide details the installation process for the RISCO seismic detector in both Stand Alone and BUS modes. For specific BUS installation programming, consult the RISCO System installation manuals.
The installation kit includes necessary components for mounting on various surfaces, including wall structure fastening sets and metallic structure fastening sets.
Technical Specifications
The RISCO RK66S Seismic Detector boasts a coverage of up to 5 meters (16 feet) radius, operates on a 9 to 16 VDC power supply, and consumes typically 20mA @ 12VDC. It features RFI immunity according to EN50130-4 and provides alarm contacts rated at 24VDC, 0.1A (N/C and N/O) and tamper contacts rated at 24VDC, 0.1A. The detector has an ingress protection rating of IP43 and an impact rating of IK08. Its dimensions are 102 x 27.5 x 80.2 mm (4.0" x 1.1" x 3.2"), and it weighs 220 g (7.7 oz).
Ordering Information
The seismic detector is available under the model number RK66S.
riscogroup.com
