MotionCam S (PhOD) Jeweller
Wireless PIR motion detector with extended photo verification possibilities
A device from the Superior product line. Only accredited Ajax Systems partners can sell, install, and administer Superior products.
Motion Detection
- Up to 12 m (39 ft) of motion detection distance¹
- SmartDetect algorithm to prevent false alarms
- Temperature compensation
- Pet immunity²
The motion detector features a detection distance of up to 12 meters (39 ft) with a horizontal detection angle of 88.5 degrees. The SmartDetect algorithm prevents false alarms, and temperature compensation ensures reliable operation. Pet immunity is supported for animals up to 20 kg (44 lb) and 50 cm (1.6 ft) in height.
¹ Up to 10 m (32.8 ft) according to INCERT (with high sensitivity level).
² When the detector is properly installed and configured.
Photo Verification
- Built-in camera to quickly assess the situation at the protected facility
- Five types of photo verification available: by alarm, scenario, schedule, arming/disarming, and on demand
- Up to 640 x 480 px photo resolution
- Up to 5 photos in a series
- IR illumination for low-light conditions
- Precise configuration of access rights to visual data in an Ajax app
The detector is equipped with a camera for immediate situation assessment, offering five types of photo verification (by alarm, scenario, schedule, arming/disarming, on demand). It supports resolutions up to 640 x 480 px and captures up to 5 photos in a series, with IR illumination for low-light conditions. Access rights to visual data can be precisely configured via the Ajax app.
Jeweller and Wings Radio Communication
- Communication range of up to 1,700 m (5,550 ft) in an open space
- Data encryption throughout the transmission process
- Regular polling to display the current device state in Ajax apps
- Data backup and resending if the transmission is interrupted
Sabotage Protection
- Tamper alarm to notify of attempts to dismantle the device
- Device authentication to prevent spoofing
- Frequency hopping to prevent radio interference and jamming
- Holding screw to secure the device on SmartBracket
Flawless Autonomy
- Up to 4 years of operation on pre-installed batteries (with Photo on demand feature disabled)
- Up to 3 years of operation (with Photo on demand feature enabled)
- Low-battery notifications
- High-quality batteries from proven manufacturers
- Minimal impact of threshold temperatures on battery life
Quick Installation and Setup
- Pairing with a hub by scanning the QR code
- Remote control and configuration in Ajax apps
- Effortless installation and maintenance without the need to disassemble the enclosure
Technical Specifications
Feature | Specification |
---|---|
Compliance with standards | EN 50131-2-2 (Grade 2), PD 6662:2017, INCERT, SSF, NFA2P |
Compatibility | For detailed information, scan the QR code or follow the link: ajax.systems/tools/devices-compatibility/?models=MC.SP.J |
Power supply |
|
Communication |
|
Motion detection |
|
Photo verification |
|
Installation |
|
Enclosure |
|
Complete set |
|
For detailed information, scan the QR code or follow the link: ajax.systems/support/devices/motioncam-s-phod/
Support: support@ajax.systems