WAGO Lean Managed Industrial Switches

Contact: 1-800-633-0405 | For the latest prices, please check AutomationDirect.com.

Overview

WAGO Lean Managed Industrial Switches offer a simple setup with advanced features for industrial networking. These switches are designed for reliability and performance in demanding environments.

Key Features:

Managed switch features with simple setup
MAC Security Encryption available
Network Topology Dashboard
VLAN and Rapid Spanning Tree Protocol
QoS (port prioritization)
Modbus monitoring for control systems
Port mirroring for advanced system troubleshooting
IGMP for Ethernet/IP network optimization
10/100/1000 Mbps auto-detect speeds
Redundant DC power inputs
9VDC to 60VDC input power available
SFP combo GbE models
Power over Ethernet (PoE+) models available
IP30 metal cases
35mm DIN rail mounting
2-year warranty

Product Models and Specifications

WAGO Industrial Lean Managed Switches

Part Number	Price	RJ45 Gigabit Ethernet Ports	SFP Combo Gigabit Ports	MAC Security Encryption	Alarm Contact	Energy Efficient Ethernet	Ethernet Ring Protection Switching	Command Line Interface (CLI)	PoE+ (configurable via CLI only)	DDoS	10/100/1000 Mbps	VLAN/TRP Protocol	Rapid Spanning Tree Protocol	Link Layer Discovery Protocol	Port Authentication	Modbus Monitoring	Operating Temperature Range	2 Year Warranty
852-1328	$-06171	6	2*			✓					✓	✓	✓	✓	✓	✓	-25 to +70°C	✓
852-1322	$-06176	8	2*	✓	✓	✓	✓	✓			✓	✓	✓	✓	✓	✓	-20 to +70°C	✓
852-1812	$-06174	8				✓	✓	✓			✓	✓	✓	✓	✓	✓	-40 to +60°C	✓
852-1813	$-06173	8	2*	✓	✓	✓	✓	✓			✓	✓	✓	✓	✓	✓	-40 to +60°C	✓
852-1813/000-001	$-006175	8	2*	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓	-40 to +60°C	✓
852-1816	$-006172	16				✓	✓	✓			✓	✓	✓	✓	✓	✓	-40 to +60°C	✓

* Optional SFP modules sold separately.

Stride Industrial Ethernet Fiber Transceivers

Part Number	Mode	Light Source	Max Trans. Distance	Price	Media	Fiber	Code	Compliances
SFP-4K-FMF	Multi-mode	1310 nm, FP	4km	$0e47	Multi-mode Fiber	62.5/125 μm	FX5	125Mbps IEEE802.3u 100BASE-FX compliant, 125Mbps FDDI ISO/IEC 9314-1 compliant
SFP-30K-FSF	Single-mode	1310 nm, FP	30 km	$0e45	Single-mode Fiber	9/125 μm	LX	125Mbps IEEE802.3ah 100BASE-LX10 compliant, 155Mbps ITU-T G957 STM S-1.1/L-1.1 compliant, 155Mbps SONET OC-3 IR-1/LR-1 compliant
SFP-500-GMF	Multi-mode	850 nm, VCSEL	550m	$0e48	Multi-mode Fiber	50/125 µm and 62.5 / 125 µm	SX	1.0625Gbps Fiber Channel FC-PI 100-M5-SN-I compliant, 1.0625Gbps Fiber Channel FC-PI 100-M6-SN-I compliant, 1.25Gbps IEEE 802.3z 1000BASE-SX compliant, 1.25Gbps IEEE 802.3ah 1000BASE-SX compliant, IEEE 802.3 1000BASE-SX+ compliant
SFP-2K-GMF	Multi-mode	1310 nm, FP	2km	$0e44	Multi-mode Fiber	50/125 µm and 62.5 / 125 µm	SX2	1.0625Gbps Fiber Channel FC-PI 100-SM-LC-L compliant, 1.25Gbps IEEE 802.3 1000BASE-LX compliant, 1.25Gbps Gigabit Ethernet compliant
SFP-10K-GSF	Single-mode	1310 nm, DFB	10 km	$0e43	Single-mode Fiber	9/125 μm	LX	1.0625Gbps Fiber Channel FC-PI 100-SM-LC-L compliant, 1.25Gbps IEEE 802.3 1000BASE-LX compliant, 1.25Gbps Gigabit Ethernet compliant
SFP-30K-GSF	Single-mode	1310 nm, DFB	30 km	$0e46	Single-mode Fiber	9/125 μm	Ihx	1.0625Gbps Fiber Channel FC-PI 100-SM-LC-L compliant, 1.25Gbps IEEE 802.3 1000BASE-LX compliant, 1.25Gbps Gigabit Ethernet compliant

Note: Use only Gigabit speed SFPs with SE2-SW10UG-2P-T.

Stride Industrial Ethernet Copper Transceivers Gigabit Ethernet

Part Number	Connector Type	Link Speed	Price
SFP-1GC-T	RJ-45	Gigabit Ethernet	$682p

The STRIDE SFP-1GC-T is a hot-pluggable Small Form Factor Pluggable (SFP) transceiver with an RJ-45 connector. It supports 1.25 Gbps data transmission up to 100m over 4-pair Cat5e/6a cable and is compliant with the SFP Multi-Source Agreement (MSA) and IEEE802.3:2002.

Technical Specifications

General Specifications for WAGO Switches:

Specification	Value
Operating Temperature Range	-20 to +70°C (852-1322, 852-1328), -40 to +60°C (852-1812, 852-1813, 852-1813/000-001, 852-1816)
Storage Temperature Range	-40 to +80°C (852-1322, 852-1328), -40 to +85°C (852-1812, 852-1813, 852-1813/000-001, 852-1816)
Humidity (Non-Condensing)	5 to 95% RH
Environmental Air	No corrosive gases permitted. For use in Pollution Degree 2 environment.
Vibration and Shock	IEC60068-2-6 and -2-27
EMC Emission of Interference	FCC Part 15, Subpart B, Class A/B; EN 55032 Class A/B; EN 55011 Class A/B; EN 61000-6-4
EMC Immunity to Interference	EN 61000-6-3, EN 61000-6-2, EN 55024, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, EN 61000-6-1
RoHS	RoHS (Pb-free) compliant
Packaging	Metal case
Protection	IP30
Agency Approvals	CE, cULus

Power Details for WAGO Switches:

Specification	Value
Input Voltage	9-48 VDC (852-1328, 852-1322), 24-48 VDC (852-1812, 852-1813, 852-1816), 24-57 VDC (852-1813/000-001)
Maximum Current	640 mA (852-1322), 400 mA (852-1328, 852-1812, 852-1813), 1500 mA (852-1816), 6000 mA (852-1813/000-001)
System Power Consumption	5.8 W (852-1322, 852-1328), 10W (852-1812, 852-1813), 11W (852-1816), 12W (852-1813/000-001 excluding PoE)
Power Supply Wiring	12AWG max
Relay Contact	24VDC, 1A resistive, open on fault

Communications Specifications for WAGO Switches:

Specification	Value
Operating Mode	Store and forward, non-blocking
MAC Addresses	16000 addresses (852-1322, 852-1328), 8000 addresses (852-1812, 852-1813, 852-1813/000-001, 852-1816)
Jumbo Frame Size	10kB
Communications Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1p, 802.1x, 802.1Q, 802.1AE (852-1322, 852-1328) IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 803.2az, 802.1d, 802.1w, 802.1p, 802.1x, 802.1Q, 802.1ab, ITU-T G8032v1/v2 (852-1812, 852-1813, 852-1813/000-001, 852-1816)
Auto-Crossover	Yes, allows straight-through or crossover cables
Auto-Sensing Operation	Yes, full and half duplex
Auto-Negotiating Speed	Yes
Cable Requirements	10BaseT: 2-pair UTP/STP Cat. 3, 4, 5 cable; 100BaseTX: 2-pair UTP/STP Cat. 5 cable; 1000BaseTX: UTP/STP Cat.5e/6a cable
Max. Cable Distance	100m [328ft]

Power over Ethernet (PoE+) for 852-1813/000-001:

Specification	Value
Power per Port	30W
Max PoE Power Budget	≥24 to <48 VDC: 120W; ≥48 to 57 VDC: 240W

Front Panel LEDs:

LED	Color	Description
PWR	Green	Primary power supply status
RPS	Green	Redundant power supply status
ALM	Red	Failure of a port connection, miscellaneous alarm
SFP	Green	SFP link established, data traffic activity (852-1813 only)
LINK/ACT	Green	Port link established, data traffic activity
100M/1G	Amber	Port operating speed
PoE	Green	PoE port power status

Dimensions (mm [inches]):

WAGO Switches:

Part Number	Weight kg [lb]	Width	Depth	Height
852-1322	0.628 [1.38]	45 [1.78]	92 [3.62]	110 [4.33]
852-1328	0.639 [1.41]	45 [1.78]	92 [3.62]	110 [4.33]
852-1812	0.550 [1.21]	100 [3.94]	116 [4.57]	PDF
852-1813	0.570 [1.26]	50 [1.97]	120 [4.72]	160 [6.30]
852-1816	0.840 [1.85]	120 [4.72]	160 [6.30]	PDF
852-1813/000-001	0.560 [1.23]	50 [1.97]	120 [4.72]	160 [6.30]

Stride Fiber Transceiver Dimensions (Inches [mm]):

Part Number	Width	Depth	Height
SFP-4K-FMF, SFP-30K-FSF	0.53 [13.5]	0.49 [12.3]	2.18 [55.4]
SFP-500-GMF, SFP-2K-GMF, SFP-10K-GSF, SFP-30K-GSF	0.33 [8.5]	0.09 [2.3]	2.18 [55.4]

Stride Copper Transceiver Dimensions (Inches [mm]):

Part Number	Width	Depth	Height
SFP-1GC-T	0.63 [15.9]	0.55 [14.0]	2.85 [72.4]

Safety and Compliance

All products comply with relevant safety and environmental standards, including:

CULUS Electrical Safety
CE European Directives
WEEE Compliant
RoHS Compliant
FC US Emissions

	WAGO Lean Managed Switch Release IX4: Port Security Advanced and PROFINET Conformance This application note details the configuration and use of WAGO's Lean Managed Switch Release IX4, focusing on Port Security Advanced features and PROFINET Conformance Class A. It covers CLI and Web-based Management (WBM) configurations, testing procedures, and integration with TIA Portal.
	WAGO I/O SYSTEM 750 XTR Controller Manual Comprehensive manual for the WAGO I/O SYSTEM 750 XTR controller (model 750-8202/040-001), detailing its features, installation, configuration, operation, and technical specifications for industrial automation.
	WAGO PFC200 G2 2ETH RS Controller: Technical Data Sheet and Specifications Comprehensive technical data sheet for the WAGO PFC200 G2 2ETH RS controller (Item No. 750-8212), detailing its features, technical specifications, connection data, environmental requirements, certifications, and compatible accessories for industrial automation applications.
	WAGO I/O System 750: Controller PFC200 Manual Comprehensive manual for the WAGO I/O System 750, featuring the PFC200 controller with 2x Ethernet, RS-232/-485, CAN, CANopen, and PROFIBUS Master capabilities. This guide covers hardware description, function descriptions, mounting, commissioning, diagnostics, and service information.
	WAGO e!COCKPIT: Installation MySQL-Server v5.1.72 Anleitung Anleitung zur Installation und Konfiguration des MySQL-Servers v5.1.72 auf einem WAGO PFC200 Controller mit der e!COCKPIT Entwicklungsumgebung. Enthält Schritte für Setup, Testen und Beispielanwendungen.
	WAGO-I/O-SYSTEM 750 XTR 4-Channel Analog Output Module (750-559/040-000) Manual This manual details the WAGO-I/O-SYSTEM 750 XTR 750-559/040-000 4AO 0-10V DC /XTR 4-Channel Analog Output Module. It covers device description, technical data, installation, safety precautions, and usage in hazardous environments for industrial automation.
	WAGO 753-436: 8-Channel Digital Input Module Data Sheet Detailed data sheet for the WAGO 753-436, an 8-channel digital input module with 24 VDC, 3 ms response time, and low-side switching. Includes technical specifications, material data, environmental requirements, approvals, and compatible products.
	WAGO I/O SYSTEM 750 750-464: 2/4 AI RTD Configurable Analog Input Module Manual Comprehensive manual for the WAGO I/O SYSTEM 750 750-464 2/4 AI RTD configurable module. Covers technical specifications, device description, process image, commissioning, diagnostics, and hazardous environment usage.