User Guide for eva models including: Smart Home App, Home App, App
Datek Smart Home AS l www.evasmart.no l 47 913 94 604 • Failure to follow the recommendations in this user manual may be dangerous or in violation of the law. The manufacturer will not be held responsible for loss or damage.
Datek | Eva Hub
File Info : application/pdf, 7 Pages, 352.55KB
DocumentDocumentEva Hub
Introduction
Eva Hub is the heart of your smart home. You can easily connect Eva Hub to your home network and install the Eva Smart Home App on your phone.
After setting up the hub, you can connect Eva devices and sensors, as well as Zigbee-certified devices from other suppliers, to create the exact smart home you desire. Add sensors, light bulbs, smart plugs, thermostats, or door lock modules, and create moods and schedules to enhance comfort and convenience.
Download the Eva Smart Home App
For iPhone
For Android
Connect Eva Hub Connect Eva Hub to your home network using the included Ethernet cable and connect the included power adapter. Go into the Eva Smart Home app to create a new home. Once done, you can scan the QR code on the inside of your hub.
Overview of Eva Hub
Pairing devices to Eva Hub Connect devices to Eva Hub via the Eva Smart Home app. The "Power" LED will flash to indicate that Eva Hub is in connection mode. Three blue LEDs rotating clockwise indicate that the connection is in progress and will stop when the connection is complete.
Datek Smart Home AS l www.evasmart.no l +47 913 94 604
Status LEDs
SYMBOL DESCRIPTION EXPLANATION
ON
Powered on
Power OFF
No power
Flashing Paring mode
NORMAL ON
Network ON OFF
Internet connection is OK ON No internet connection
ON
Server connection is OK
Server OFF
No server connection
ON
Connection Flashing Receiving/sending data
Zigbee Flashing
Receiving/sending data
OFF
Button LED
COLOR EXPLANATION
Magenta
ON The Hub is rebooting, LED turns OFF after reboot
ON The Hub has been shut down and you cannot
control your home. It is safe to remove the power
Red
cable now
NORMAL OFF
OFF
Note: Restart your Hub by unplugging the power cable and reconnecting the power again
Datek Smart Home AS l www.evasmart.no l +47 913 94 604
Circular status LEDs
DESCRIPTION
EXPLANATION
NORMAL
1 blue LED moving clockwise The Hub is starting up
OFF
1 or more blue LED(s) counterclockwise
moving
The
Hub
is
updating
its
firmware
OFF
2 blue LEDs moving clockwise Commissioning in progress
OFF
Placement and Installation
Eva Hub can be placed on flat surfaces or mounted on the wall.
For wall mounting, remove the cover on the bottom by gently pulling the top and bottom apart. Note: Do not twist the bottom or top of the cover as it may damage the product.
Use the cover's two mounting holes as a wall bracket for wall mounting. Secure the cover in the desired location using the included mounting materials. Finally, ensure that the power cable and network cable are placed in the cable channel and place Eva Hub in the wall-mounted cover.
USB A port
The Hub is equipped with an USB A port for possible future use. Do not connect any device to this USB port.
Button use
Button on the front
The button is not in use
Datek Smart Home AS l www.evasmart.no l +47 913 94 604
Button on the back ("Reset")
ACTION
DESCRIPTION EXPLANATION
Press for more than 5 and less than 10 seconds
Restart Zigbee Restarting the Zigbee network of coordinator the Hub
Press for more than 10 and less than 15 seconds
Restart
device
Full restart of the Hub. The Button LED turns ON (magenta)
Shuts down the Hub to safely
Press for more than 15 seconds
Shutdown
remove the power connection. The Button LED turns ON (red)
Note: Restart your Hub by unplugging the power cable and
reconnecting the power again.
In the box
· Eva Hub · Power supply · Network cable · Screws and plugs for wall mounting · Safety information
Important safety information
· Use only the original power supply for Eva Hub. · Do not use the Hub or accessories if they have visible damage. · The hub can be used in temperatures between 0 ºC to 40 ºC and is
for indoor use in dry environments. · Do not place Eva Hub near heat sources or in direct sunlight as this
can cause overheating. · Do not use Eva Hub in wet, humid, or extremely dusty environments
as this can damage the product.
Datek Smart Home AS l www.evasmart.no l +47 913 94 604
· Failure to follow the recommendations in this user manual may be dangerous or in violation of the law. The manufacturer will not be held responsible for loss or damage.
Appendix Information on disposal for users of waste electrical & electronic equipment
This symbol on the product and accompanying documents means that used electrical and electronic equipment (WEEE) should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product to designated collection points where it will be accepted free of charge. Alternatively, in some countries, you may be able to return your products to your local retailer upon purchase of an equivalent new product. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.
Software updates Software updates can be released by the manufacturer to fix bugs or enhance functionality after the product has been released. Updated software versions released will not impact continued compliance with applicable rules.
Datek Smart Home AS l www.evasmart.no l +47 913 94 604
Technical specifications
General
IP Class: IP 20 (indoor) OTA upgradable
External Communication 10/100Mbps Ethernet (RJ45)
Radio protocol: Zigbee 3.0
Local Communication Frequency: 2400-2483,5 MHz (IEEE 802.15.4)
Power Supply
Transmission power: 19dBm External Micro USB power adapter 5V DC/2A
Model: 3YG GQ24-050200-AG Operating temperature: 0 to +40 ¨C
Ratings
Storage temperature: -20 to +40 ¨C Operating voltage: 5V
Power supply current: 2A
Declaration of Conformity
Datek Smart Home AS declares that the equipment described in this document, is in compliance with the essential requirements and other relevant provisions of EU Directive 2014/53/EU. If you require a copy of the original signed DoC, please visit https://hjelp.evasmart.no/hc/no or scan QR code that can be found on the packaging of this product and select documents for your product.
Datek Smart Home AS l www.evasmart.no l +47 913 94 604
Subject to change without notice 2023-11-02_v1