23505A1C Shampoo Bowl for Salons
Product Overview
This document provides the technical specifications and dimensions for the 23505A1C Shampoo Bowl, designed for use in salon environments.
Dimensions and Components
The shampoo bowl unit includes the main bowl, a bracket for mounting, a bowl leveling bolt, a drain assembly, and a drain hose. Faucet and plumbing connections are also detailed.
Bowl Dimensions:
- Width: 19.3 inches (490 mm)
- Depth: 18.8 inches (477 mm)
- Height: 10.6 inches (270 mm)
- Overall Height (with bracket): 31 1/2 inches
Faucet and Plumbing Details:
- Faucet Spout Length: 3 inches (76.5 mm)
- Faucet Height: 4 inches (104 mm)
- Deck Thickness Compatibility: Up to 1 inch (25 mm)
- Drain Diameter: 2 inches (52 mm)
- Drain Hose Length: 20 inches (500 mm)
- Water Inlet Connections: 1/2" IPS standard pipe connection with 3/8" adapter included (for both hot and cold water).
- Drain Outlet Diameter: 1.4 inches (35 mm)
- Mounting Bolt: M12x1.5
Bracket and Leveling:
A bracket is provided for secure installation, along with a bowl leveling bolt to ensure the bowl is properly positioned.
Important Installation Note:
Note: Do not apply Teflon tape to the 3/8" compression fitting.
Component Measurements:
- Bracket mounting holes are spaced to accommodate standard installations.
- Faucet base dimensions: 3.2 inches (82 mm) width, 2.7 inches (69.5 mm) height.
- Drain assembly inlet and outlet dimensions are clearly marked.
Diagrammatic Representation
The provided diagrams illustrate the overall assembly of the shampoo bowl, including the placement of the bowl, faucet, drain, and bracket. Detailed callouts indicate specific measurements for each component and connection point, aiding in installation and understanding of the unit's proportions.
The diagram shows the bowl with its integrated faucet and shower head. The drain assembly is depicted below the bowl, connected to a flexible drain hose. The mounting bracket is shown above the bowl, with a leveling bolt for adjustment. Plumbing connections for hot and cold water are indicated with standard pipe sizes and adapters.