Novilla N-F12002-King Assembly Instructions
Please keep for future reference.
Introduction
This document provides assembly instructions for the Novilla N-F12002-King bed frame. Please review all parts and fittings before beginning assembly. For assistance, please contact support@novilla.net.
A video guide is available by scanning the QR code provided on the first page.
Safety Precautions
- Ensure you have the necessary tools: screwdrivers and a hammer.
- If any parts are missing or damaged, contact support@novilla.net.
- Do not allow children to play with the parts during assembly.
- Assemble on a soft surface, like a carpet, to prevent scratching.
- Keep small parts away from children to avoid choking hazards.
- Clean the product with a soft, damp cloth.
Components - Parts
Please check you have all the parts listed below:
A
[Headboard]
1pc
B
[Side Rail]
1pc
C1
[Support Beam]
1pc
C2
[Support Beam]
1pc
D
[Cross Support]
2pcs
E
[Cross Support]
2pcs
G
[Wood Slat]
2pcs
H
[Wood Slat]
1pc
I
[Wood Slat]
2pcs
I1
[Wood Slat]
2pcs
J
[Support Bar]
1pc
K
[Leg]
2pcs
L
[Leg]
2pcs
M
[Foot]
2pcs
O1
[Bracket]
1pc
O2
[Bracket]
1pc
Components - Fittings
Please check you have all the fittings listed below:
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
P
M8 x 50mm
6pcs
Q
M8 x 40mm
8pcs
R
M8 x 25mm
6pcs
S
M8 x 18mm
24pcs
T
M8
4pcs
U
M8 Spanner
1pc
Assembly Instructions
Step 1
Attach part A to part B using fittings P (4pcs) and T (4pcs).
Step 2
Attach part H to parts E using fittings R (4pcs).
Step 3
Attach brackets O1 and O2 to part D using fitting S (4pcs).
Step 4
Attach the assembled D/O1/O2 units to parts C1 and C2 using fittings S (8pcs). Ensure the brackets are oriented correctly.
Step 5
Attach part M to the ends of the assembled frame using part O1 and O2.
Step 6
Attach the headboard (A) to the side rails (B) using fittings R (4pcs).
Step 7
Attach the support beams (C1, C2) to the headboard and footboard structure using fitting S (4pcs).
Step 8
Attach the legs (K) to the frame using fittings Q (6pcs). Attach the support bar (J) to the frame using fittings S (4pcs).
Step 9
Attach the wood slats (I, I1) to the support beams (H) using fitting S (8pcs).
Step 10
Attach the remaining wood slats (G) to the frame using fittings P (2pcs) and Q (2pcs).
Step 11
Place the remaining wood slats (G) onto the frame, ensuring they are evenly spaced.
Step 12
The assembly is now complete. Ensure all fittings are tightened securely.
For any questions or assistance, please contact Novilla customer support at: support@novilla.net
