infobitav DX-T-22 iTrans 2CH XLR Dante Analog Transmitter User Guide

User Guide for infobitav models including: DX-T-22 iTrans 2CH XLR Dante Analog Transmitter, DX-T-22, iTrans 2CH XLR Dante Analog Transmitter, Dante Analog Transmitter, Analog Transmitter, Transmitter

Alex

230f0843a62562cfd0138ffefc629cec

Масштабаторы развертки Infobit iTrans DX-T-22 - купить в Галерее безупречной электроники Назаров

Звуковые карты и интерфейсы Infobit iTrans DX-T-22 купить в Москве с доставкой

File Info : application/pdf, 2 Pages, 241.25KB

Infobit iTrans DX-T-22

iTrans DX-T-22
Quick Guide

1. Product Introduction This product is applied to the audio system field to convert the analog audio signal to Dante audio signal. Power supply Ethernet (PoE) switch.
2. Product Feature
1. Function Introduction: Convert the received analog audio signals to Dante network audio signals.
2. Input & Output : Support two analog audio signal inputs, two Dante outputs.
3. Hardware interface type: Two XLR are used to input analog audio signals; One RJ45 port is used to output Dante network audio signal.

4. Technical Parameters

Model No.

iTrans DX-T-22

Product Type

Audio signal adapter

Function

Convert analog audio signal to Dante network audio signal output

3 pin XLR F/M

RJ45 Port

Analog audio interface

XLR

Dante

RJ45

Frequency response

20Hz to 20kHz (-/+0.5dB)

Maximum signal level (balanced)

+18dBu / +4dBu / 0dBu

Dynamic range

> 100dB

SNR (Signal to Noise Ratio)

> 100dB

THD (Total Harmonic Distortion) < 0.01%+4dBu

Power consumption
Operating temperature
Size (LxWxH) Weight

<1W 0-40 652mm x 32mm x 22mm 0.2kg

4. Product Overview

5. Product Connect
1. Download and install the Dante Controller from Audinate website (www.audinate.com ).
2. Connect the device to the switch using Dante network audio system with network cable.
3. The analog audio transmission device is connected through the XLR interface.
4. Search for devices in Dante Controller software, Select and open the devices to be configured. On the Routing page, match the input row with the output column with a custom check.
5. Once set up and configured the audio routing between audio device, the audio device will remember and save the settings.
6. Do not spill any corrosive chemicals or liquids on or near the equipment.

7. Packing List

DX-T-22 1Set

Quick Guide 1Pcs

8. Notes:
In order to ensure the reliable use of equipment and the safety of personnel, please follow below details when installing, using and maintaining:
1. When the equipment is installed, ensure that the ground wire in the power line is well grounded and the connection point of the chassis is well grounded.
2. Keep the working environment well ventilated, so that the heat generated by the equipment can be discharged in time, so as not to damage the equipment due to high temperature.
3. If the equipment is not used for a long time or in a wet condensation environment, the main power supply should be turned off.
4. Be sure to unplug the ac power cord of the equipment from the power supply socket before the following operations:
A. Remove or reload any part of the equipment.
B. Disconnect or reconnect any electrical plug or
connection to the device. 5. Non-professionals without permission, do not
dismantle the equipment without authorization, so as to avoid the risk of electric shock. Do not repair, so as not to increase the damage of the equipment.

Alex

230f0843a62562cfd0138ffefc629cec

References