KLEVER Superlight Wireless Gaming Mouse
User Manual
How to Connect the Mouse
Installation
- Remove the bottom back cover of the mouse to find the 2.4GHz receiver inside.
- Connect the included 2.4 GHz adapter or USB cable to the device's USB port. Use the switch on the back of the mouse to select the connection mode.
- Wait for the device to detect and configure the mouse.
- If the device does not work correctly in wireless mode, press and hold the left, right, and scroll wheel buttons simultaneously for 3 seconds. When the LED on the DPI button turns yellow, reconnect the USB receiver.
- Battery Status: When the battery is low, the LED on the DPI button will glow red. While charging, the LED will remain red and will return to its original color once charging is complete.
Mouse Functions
The KLEVER Superlight Wireless Gaming Mouse features several buttons and modes. The diagrams illustrate the placement of these functions.
Top View
The top of the mouse includes:
- 1. Left button
- 2. Right button
- 3. Scroll wheel
- 4. DPI selector: Allows adjustment of the mouse's sensitivity (Dots Per Inch).
Bottom View
The underside of the mouse features:
- 5. Forward & Back buttons: Typically used for web navigation or in-game actions.
- 6. Bottom cover: This removable cover provides access to the 2.4GHz receiver storage.
- 7. Connection Mode Switch: This switch allows selection between three connection types:
- 2.4 GHz Wireless
- Wired mode
- 2.4 GHz (ECO mode)
- 8. Polling Rate Selector: Choose from the following polling rates: 125 Hz, 250 Hz, 500 Hz, 1000 Hz.
